Professional Documents
Culture Documents
Procedure Text
Procedure Text
1. Wet your hands with clean, running water (warm or cold), turn off the tap, and apply
soap.
2. Lather your hands by rubbing them together with the soap. Lather the backs of your
hands, between your fingers, and under your nails.
3. Scrub your hands for at least 20 seconds. Need a timer? Hum the “Happy Birthday”
song from beginning to end twice.
4. Rinse your hands well under clean, running water.
5. Dry your hands using a clean towel or air dry them.
1. What kind of text is it? (descriptive text / recount text/narrative text/ procedure text)
2. What is the text mainly about?
A. Soap used to wash hands.
B. How to clean hands properly.
C. Cleaning hands with hand sanitizer.
D. How long we should wash our hands.
houses.
C. Some ways to save the water.
D. Some ways to take shower.
8. How long we should take a shower?
By two minutes By an hour
By ten minutes By half an hour
STRAWBERRY JUICE
Ingredients :
5 Large strawberries
2 tsp sugar
½ glass of water
Milk or yogurt (optional)
Ice cubes
Instruction :
First, slice the fruits.
Then, put them into blender.
Next, pour water, sugar and ice cubes.
If you like it creamy, you may add milk or add yogurt if you prefer sour
taste.
After that, blend them for about 2 or 3 minutes.
And the last pour into the glass, add straw and the juice is ready to drink.
1. What is the purpose of the text?
answer choices
The way to make strawberry juice
The description of strawberry
How to drink strawberry juice
The way to ask people to consume juic
STRAWBERRY JUICE
Ingredients :
5 Large strawberries
2 tsp sugar
½ glass of water
Milk or yogurt (optional)
Ice cubes
Instruction :
First, slice the fruits.
Then, put them into blender.
Next, pour water, sugar and ice cubes.
If you like it creamy, you may add milk or add yogurt if you prefer sour
taste.
After that, blend them for about 2 or 3 minutes.
And the last pour into the glass, add straw and the juice is ready to drink.
2. Based on the text, how many strawberries do we need?
answer choices
4
5
6
7
Multiple Choice
Add
STRAWBERRY JUICE
Ingredients :
5 Large strawberries
2 tsp sugar
½ glass of water
Milk or yogurt (optional)
Ice cubes
Instruction :
First, slice the fruits.
Then, put them into blender.
Next, pour water, sugar and ice cubes.
If you like it creamy, you may add milk or add yogurt if you prefer sour
taste.
After that, blend them for about 2 or 3 minutes.
And the last pour into the glass, add straw and the juice is ready to drink.
3. What should we do if we want to make creamy strawberry juice?
answer choices
We add more strawberry
Add milk
Add more ice cubes
Add yogurt
2 tsp sugar
½ glass of water
Milk or yogurt (optional)
Ice cubes
Instruction :
First, slice the fruits.
Then, put them into blender.
Next, pour water, sugar and ice cubes.
If you like it creamy, you may add milk or add yogurt if you prefer sour
taste.
After that, blend them for about 2 or 3 minutes.
And the last pour into the glass, add straw and the juice is ready to drink.
4. Which statement is NOT TRUE according to the text?
answer choices
We add yogurt to make sour taste
We need a blender to blend the juice
We need 5 small strawberries
Blend the juice for about 2-3 minutes
STRAWBERRY JUICE
Ingredients :
5 Large strawberries
2 tsp sugar
½ glass of water
Milk or yogurt (optional)
Ice cubes
Instruction :
First, slice the fruits.
Then, put them into blender.
Next, pour water, sugar and ice cubes.
If you like it creamy, you may add milk or add yogurt if you prefer sour
taste.
After that, blend them for about 2 or 3 minutes.
And the last pour into the glass, add straw and the juice is ready to drink.
5. “Blend them for about …”(step 4)
answer choices
Pour
Separate
Mix
Add
Instruction :
First of all, Choose and prepare 3 kind of flowers.
Secondly, Cut the flowers. Make sure the length of them is about 7cm.
Thirdly, Cut the elastic wire and measure it to your head. Tie the end of
the wire to make it sturdy.
Fourthly, Arrange the flowers to the ribbon and glue them. Make sure
the flowers fill in the ribbon beautifully.
Then, Attach the ribbon with the flowers to the elastic wire by using the
tape. Fill in the empty space with smaller size flowers.
After that, Cut another ribbon about 50 cm and insert it into the wire
with flowers.
The last, Put the crown on your head. Tie the ribbon/rope. You’ll look
lovely wearing it.
6. What is the text about?
answer choices
To describe the flower crown
To show how to use flower crown
To show how to make flower crown
To explain 3 kind of flower
nstruction :
First of all, Choose and prepare 3 kind of flowers.
Secondly, Cut the flowers. Make sure the length of them is about 7cm.
Thirdly, Cut the elastic wire and measure it to your head. Tie the end of
the wire to make it sturdy.
Fourthly, Arrange the flowers to the ribbon and glue them. Make sure
the flowers fill in the ribbon beautifully.
Then, Attach the ribbon with the flowers to the elastic wire by using the
tape. Fill in the empty space with smaller size flowers.
After that, Cut another ribbon about 50 cm and insert it into the wire
with flowers.
The last, Put the crown on your head. Tie the ribbon/rope. You’ll look
lovely wearing it.
7. What should you do after you attach the ribbon with flower to the
elastic wire?
answer choices
Cut another ribbon and insert it into the wire
Fill in empty space with smaller flower
Arrange and glue the flower to ribbon
Choose and prepare the flower
Instruction :
First of all, Choose and prepare 3 kind of flowers.
Secondly, Cut the flowers. Make sure the length of them is about 7cm.
Thirdly, Cut the elastic wire and measure it to your head. Tie the end of
the wire to make it sturdy.
Fourthly, Arrange the flowers to the ribbon and glue them. Make sure
the flowers fill in the ribbon beautifully.
Then, Attach the ribbon with the flowers to the elastic wire by using the
tape. Fill in the empty space with smaller size flowers.
After that, Cut another ribbon about 50 cm and insert it into the wire
with flowers.
The last, Put the crown on your head. Tie the ribbon/rope. You’ll look
lovely wearing it.
8. How many kind of flower do we need to make flower crown?
answer choices
1
2
3
4
Instruction :
First of all, Choose and prepare 3 kind of flowers.
Secondly, Cut the flowers. Make sure the length of them is about 7cm.
Thirdly, Cut the elastic wire and measure it to your head. Tie the end of
the wire to make it sturdy.
Fourthly, Arrange the flowers to the ribbon and glue them. Make sure
the flowers fill in the ribbon beautifully.
Then, Attach the ribbon with the flowers to the elastic wire by using the
tape. Fill in the empty space with smaller size flowers.
After that, Cut another ribbon about 50 cm and insert it into the wire
with flowers.
The last, Put the crown on your head. Tie the ribbon/rope. You’ll look
lovely wearing it.
10. What is the antonym of the word “attach” in steps 5?
answer choices
Apply
Remove
Tighten
Adjust