Professional Documents
Culture Documents
Rimera-Overseas Esp Technology Catalog
Rimera-Overseas Esp Technology Catalog
CАTАLOG
ARTIFICIAL LIFT
rimseas.com
RIMERA OVERSEAS DMCC
This book is the property of RIMERA OVERSEAS DMCC and the information contained within is confidential. No part of this book may be
reproduced, stored, distributed by any from or by any means, electronic or mechanical, including photocopying and recording, to anyone
without the prior written permission of the publisher. This information is provided for general information only and is believed to be accurate, it
is provided “as is” without express or implied warranty. The user agrees to assume all liabilities related to the use of or reliance on such
information. RIMERA OVERSEAS DMCC and its affiliates shall not be liable for any direct, indirect, special, exemplary or consequential
damages any cause whatsoever including but not limited to its negligence. Specifications are current at the time of printing.
Contents
Contents ..................................................................................................................................................................................................................................................................2
ABOUT US ............................................................................................................................................................................................................................................................. 5
DOWNHOLE EQUIPMENT............................................................................................................................................................................................................................. 7
BODH SUMMARY...................................................................................................................................................................................................................................................... 7
PUMPS .................................................................................................................................................................................................................................................................... 8
ESP-R 272-750........................................................................................................................................................................................................................................................ 19
ESP-R 319-1050..................................................................................................................................................................................................................................................... 23
ESP-R 362-130........................................................................................................................................................................................................................................................ 41
ESP-R 362-210....................................................................................................................................................................................................................................................... 45
ESP-R 362-410....................................................................................................................................................................................................................................................... 54
ESP-R 362-600...................................................................................................................................................................................................................................................... 59
ESP-R 362-940...................................................................................................................................................................................................................................................... 67
ESP-R 406-450...................................................................................................................................................................................................................................................... 94
VARIABLE SPEED DRIVES (VSD) FOR SUCKER ROD PUMPS ......................................................................................................................................................... 217
ABOUT US
RIMERA OVERSEAS DMCC
RIMERA OVERSEAS DMCC is a leading oil and gas service company that incorporates factories, manufacturing facilities and a network of
service centers in Russia and internationally. The company manufactures electric submersible pumping systems for the world since 1978. Today
Rimera Overseas DMCC manufactures over 7,500 reliable ESP systems per year that includes pumps, gas separators, gas management systems,
motor protectors, induction and permanent magnet motors and VSDs to give operators high efficient solutions to produce oil.
Every year Rimera Overseas DMCC invests in innovation, research and development of new technologies to improve operating performance,
increase efficiency, enhance reliability and extend run life of its products to help the clients to optimize production and lower operating cost
under demanding market requirements.
ISO 9001-2015
RIMERA-SERVICE
COMPETITIVE ADVANTAGES
1. 2. 3.
Rimera Overseas DMCC is one of the Our VERTICAL INTEGRATION from 40-YEAR EXPERIENCE IN
world's largest oilfield service companies R&D to Manufacturing, Sales & Service ENGINEERING INNOVATION
in Electric Submersible Pumps (ESP) and Lease of ESP systems guarantees empowers us to offer our customers
production and service. Currently, our our customers trustworthy HIGH- solutions for vast applications
service portfolio covers over 5,000 QUALITY SOLUTIONS
WELLS
4. 5. 6.
Rimera Overseas DMCC’s R&D CENTER ENERGY-EFFICIENT SOLUTIONS let Rimera Overseas DMCC offers reliable
constantly improves its products and our customers minimize operating costs solutions for VARIETY OF
works on implementation of new Artificial and increase oil production. OUR COMPLICATED WELL CONDITIONS:
Lift technologies and materials to meet INTEGRATED APPROACH extends • Sidetracks, highly deviated and
customers' changing demands on a HIGH ESP systems run life in even the most horizontal wells
QUALITY AND RELIABILITY LEVELS complex well conditions • Low or unstable flow rates
• High GOR, sand and scales production
• High temperature wells
• High corrosiveness and salt deposits
RIMERA OVERSEAS DMCC meets the best industry standards and guarantees stable quality and comprehensive industrial and environmental
safety.
DOWNHOLE EQUIPMENT
*For order please select required part number and options required for your application.
BODH SUMMARY
CS Part SS Part BODH OD Length Weight
Pump Series Description
Number Number mm in mm in kg lb
9001000 9002000 272 1.875 10RD NUE 69 2.72 120 0.39 2.3 5.10
N/A N/A 319 1.875 10RD NUE Integrated into UT section - - - -
9003000 9004000 338 2.375 10RD NUE 86 3.38 235 9.25 6.5 14.33
9005000 9006000 2.375 8RD EUE 92 3.62 146 5.75 4.4 9.70
9007000 9008000 362 2.875 10RD NUE 92 3.62 146 5.75 4 8.82
9009000 9010000 2.875 8RD EUE 92 3.62 146 5.75 3.7 8.16
9011000 9012000 2.375 8RD EUE 92 3.62 146 5.75 4.4 9.70
9013000 9014000 2.875 10RD NUE 92 3.62 146 5.75 4 8.82
9015000 9016000 406 2.875 8RD EUE 92 3.62 146 5.75 3.7 8.16
9017000 9018000 3.500 10RD NUE 109 4.29 146 5.75 4.5 9.92
9019000 9020000 3.500 8RD EUE 109 4.29 146 5.75 4.4 9.70
9021000 9109000 3.500 10RD NUE 114 4.49 258 10.16 13.2 29.10
449
9110000 9111000 3.500 8RD EUE 114 4.49 258 10.16 12.8 28.77
N/A N/A 3.500 10RD NUE Integrated into UT section - - - -
535
N/A N/A 3.500 8RD EUE Integrated into UT section - - - -
PUMPS
Rimera Overseas DMCC pumps offer industry technology for a variety of applications, providing operators a low total cost of ownership by
extending electrical submersible pump (ESP) run life. The reliable and efficient Rimera Overseas DMCC pumps were developed to be operated
for oil and water production can be used for horizontal pumping systems, booster services, direct injections into oil formation, mine
dewatering, gas well dewatering, for onshore and offshore applications. Patented shimming procedure for compression pumps provides easy
installation, saves time on rig workover and decreases non-productive time. Wear resistant pumps deliver high performance and reliability in
the most complex downhole environments extending pump run life in the sandy wells and the wells after fracturing.
PUMP NOMENCLATURE
ESP -R X X
1 2 3 4
*For order please select required part number and options required for your application.
Floater: Impellers move freely up and Compression: Impellers are fixed to the Wear resistance (WR) modular pumps:
down on the shaft inside the diffusers with shaft with up and down travel controlled by Floater construction with tungsten
the impeller axial thrust supported by the shaft. Axial shaft thrust and impeller carbide bearings providing radial
thrust washers. Shaft thrust is transmitted thrust are transmitted to the motor stabilization and supporting impeller
to the motor protector thrust bearing. protector thrust bearing. thrust for an assembly of stages. Shaft
thrust is transmitted to the motor
protector thrust bearing.
Radial bearings are made of tungsten carbide, located in head, base and evenly distributed along a pump housing, 1 bearing/0.35 m (1.15 ft).
F – floater construction, each impeller has 2 trust washers on the bottom and one at the top. FSP – floater construction with one thrust
washer in each impeller on the bottom and one at the top.
PUMP SUMMARY
Features
STANDARD PUMPS
Housing O.D., Recommended Operating Range (ROR)
Pump Stage type Construction
in. (mm) 60 Hz, bpd rpm 50 Hz, m3/d rpm
ESP-R 338-150 91 – 204 12 – 27
ESP-R 338-300 212 – 392 28 – 52
3.38 (86) Radial flow C, F 3,500 2,917
ESP-R 338-400 283 – 472 38 – 63
ESP-R 338-580 453 – 755 60 – 100
ESP-R 362-130 75 – 170 10 – 22.5
ESP-R 362-340 257 – 423 34 – 56
ESP-R 362-600 453 – 755 60 – 100
C, F
ESP-R 362-750 3.62 (92) Radial flow 604 – 943 3,500 80 – 125 2,917
ESP-R 362-950 604 – 1,208 80 – 160
ESP-R 362-1200 906 – 1,510 120 – 200
ESP-R 362-1400 981 – 1,736 130 – 231
ESP-R 406-270 F 189 – 340 25 – 45
ESP-R 406-1250 Radial flow 906 – 1,510 120 – 200
C, F
ESP-R 406-1900 1,359 – 2,264 180 – 300
ESP-R 406-1950 4.06 (103) FSP 1,434 – 2,566 190 – 341
3,500 2,917
ESP-R 406-2400 F 1,811 – 2,868 241 – 381
Mixed flow
ESP-R 406-3100 C, F 2,264 – 3,774 301 – 501
ESP-R 406-3700 C, F 2,830 – 4,906 375 – 650
ESP-R 449-9400 C, FSP 7,170 – 11,699 952 – 1,553
ESP-R 272-150
High speed pumps operate at 2,000 – 6,000 rpm.
TECHNICAL DATA
Recommended Operating Range, bpd 113 – 189 Housing pressure limit, psi 6,000
Best Efficiency Point (BEP), bpd 151 Minimum Casing ID, in 3.46
Head @BEP, ft 11.3 Shaft Diameter, in. 0.55
Power @BEP, hp 0.03 Shaft strength, hp HSS 90
Best Efficiency, % 43.5 USS 106
Nominal Housing Diameter (O.D.), in. 2.72 USS+ 114
TECHNICAL DATA
PUMP CONFIGURATIONS
ESP-R 272-220
High speed pumps operate at 2,000 – 6,000 rpm.
TECHNICAL DATA
Recommended Operating Range, bpd 151 – 302 Housing pressure limit, psi 6,000
Best Efficiency Point (BEP), bpd 226 Minimum Casing ID, in 3.46
Head @BEP, ft 12.3 Shaft Diameter, in. 0.55
Power @BEP, hp 0.04 Shaft strength, hp HSS 90
Best Efficiency, % 49.0 USS 106
Nominal Housing Diameter (O.D.), in. 2.72 USS+ 114
TECHNICAL DATA
PUMP CONFIGURATIONS
ESP-R 272-380
High speed pumps operate at 2,000 – 6,000 rpm.
TECHNICAL DATA
Recommended Operating Range, bpd 264 – 491 Housing pressure limit, psi 6,000
Best Efficiency Point (BEP), bpd 377 Minimum Casing ID, in 3.46
Head @BEP, ft 12.4 Shaft Diameter, in. 0.55
Power @BEP, hp 0.06 Shaft strength, hp HSS 90
Best Efficiency, % 59.7 USS 106
Nominal Housing Diameter (O.D.), in. 2.72 USS+ 114
TECHNICAL DATA
PUMP CONFIGURATIONS
ESP-R 272-600
High speed pumps operate at 2,000 – 6,000 rpm.
TECHNICAL DATA
Recommended Operating Range, bpd 453 – 793 Housing pressure limit, psi 6,000
Best Efficiency Point (BEP), bpd 604 Minimum Casing ID, in 3.46
Head @BEP, ft 10.9 Shaft Diameter, in. 0.55
Power @BEP, hp 0.10 Shaft strength, hp HSS 90
Best Efficiency, % 46.8 USS 106
Nominal Housing Diameter (O.D.), in. 2.72 USS+ 114
TECHNICAL DATA
Recommended Operating Range, m3/d 60 – 105 Housing pressure limit, atm 414
Best Efficiency Point (BEP), m3/d 80 Minimum Casing ID, mm 88
Head @BEP, m 2.3 Shaft Diameter, mm 14
Power @BEP, kW 0.04 Shaft strength, kW HSS 55
Best Efficiency, % 46.8 USS 65
Nominal Housing Diameter (O.D.), mm 69 USS+ 70
PUMP CONFIGURATIONS
ESP-R 272-750
High speed pumps operate at 2,000 – 6,000 rpm.
TECHNICAL DATA
Recommended Operating Range, bpd 604 – 906 Housing pressure limit, psi 6,000
Best Efficiency Point (BEP), bpd 755 Minimum Casing ID, in 3.46
Head @BEP, ft 8.5 Shaft Diameter, in. 0.55
Power @BEP, hp 0.09 Shaft strength, hp HSS 90
Best Efficiency, % 54.0 USS 106
Nominal Housing Diameter (O.D.), in. 2.72 USS+ 114
TECHNICAL DATA
Recommended Operating Range, m3/d 80 – 120 Housing pressure limit, atm 414
Best Efficiency Point (BEP), m /d
3
100 Minimum Casing ID, mm 88
Head @BEP, m 1.8 Shaft Diameter, mm 14
Power @BEP, kW 0.04 Shaft strength, kW HSS 55
Best Efficiency, % 54.0 USS 65
Nominal Housing Diameter (O.D.), mm 69 USS+ 70
PUMP CONFIGURATIONS
ESP-R 319-680
High speed pumps operate at 2,000 – 6,000 rpm.
TECHNICAL DATA
Recommended Operating Range, bpd 515 – 858 Housing pressure limit, psi 6,000
Best Efficiency Point (BEP), bpd 680 Minimum Casing ID, in 3.94
Head @BEP, ft 15.9 Shaft Diameter, in. 0.55
Power @BEP, hp 0.14 Shaft strength, hp HSS 90
Best Efficiency, % 59.1 USS 106
Nominal Housing Diameter (O.D.), in. 3.19 USS+ 114
TECHNICAL DATA
Recommended Operating Range, m3/d 68 – 114 Housing pressure limit, atm 414
Best Efficiency Point (BEP), m /d
3
91 Minimum Casing ID, mm 100
Head @BEP, m 3.4 Shaft Diameter, mm 14
Power @BEP, kW 0.06 Shaft strength, kW HSS 55
Best Efficiency, % 59.1 USS 65
Nominal Housing Diameter (O.D.), mm 81 USS+ 70
PUMP CONFIGURATIONS
ESP-R 319-1050
High speed pumps operate at 2,000 – 6,000 rpm.
TECHNICAL DATA
Recommended Operating Range, bpd 604 – 1,359 Housing pressure limit, psi 6,000
Best Efficiency Point (BEP), bpd 1,057 Minimum Casing ID, in 3.94
Head @BEP, ft 16.1 Shaft Diameter, in. 0.67
Power @BEP, hp 0.20 Shaft strength, hp HSS 90
Best Efficiency, % 62.4 USS 106
Nominal Housing Diameter (O.D.), in. 3.19 USS+ 114
TECHNICAL DATA
Recommended Operating Range, m3/d 80 – 180 Housing pressure limit, atm 414
Best Efficiency Point (BEP), m /d
3
140 Minimum Casing ID, mm 100
Head @BEP, m 3.4 Shaft Diameter, mm 17
Power @BEP, kW 0.09 Shaft strength, kW HSS 55
Best Efficiency, % 62.4 USS 65
Nominal Housing Diameter (O.D.), mm 81 USS+ 70
PUMP CONFIGURATIONS
ESP-R 338-150
TECHNICAL DATA
Recommended Operating Range, bpd 91 – 204 Housing pressure limit, psi 6,000
Best Efficiency Point (BEP), bpd 163 Minimum Casing ID, in 4.41
Head @BEP, ft 18.8 Shaft Diameter, in. 0.67
Power @BEP, hp 0.07 Shaft strength, hp Standard 131
Best Efficiency, % 30.2 HSS 163
Nominal Housing Diameter (O.D.), in. 3.38 USS 196
TECHNICAL DATA
PUMP CONFIGURATIONS
ESP-R 338-300
TECHNICAL DATA
Recommended Operating Range, bpd 212 – 392 Housing pressure limit, psi 6,000
Best Efficiency Point (BEP), bpd 314 Minimum Casing ID, in 4.41
Head @BEP, ft 19.7 Shaft Diameter, in. 0.67
Power @BEP, hp 0.10 Shaft strength, hp Standard 131
Best Efficiency, % 44.0 HSS 163
Nominal Housing Diameter (O.D.), in. 3.38 USS 196
TECHNICAL DATA
PUMP CONFIGURATIONS
ESP-R 338-400
TECHNICAL DATA
Recommended Operating Range, bpd 283 – 472 Housing pressure limit, psi 6,000
Best Efficiency Point (BEP), bpd 397 Minimum Casing ID, in 4.41
Head @BEP, ft 21.2 Shaft Diameter, in. 0.67
Power @BEP, hp 0.13 Shaft strength, hp Standard 131
Best Efficiency, % 47.2 HSS 163
Nominal Housing Diameter (O.D.), in. 3.38 USS 196
TECHNICAL DATA
PUMP CONFIGURATIONS
ESP-R 338-580
TECHNICAL DATA
Recommended Operating Range, bpd 454 – 756 Housing pressure limit, psi 6,000
Best Efficiency Point (BEP), bpd 580 Minimum Casing ID, in 4.41
Head @BEP, ft 23.0 Shaft Diameter, in. 0.67
Power @BEP, hp 0.18 Shaft strength, hp Standard 131
Best Efficiency, % 54.3 HSS 163
Nominal Housing Diameter (O.D.), in. 3.38 USS 196
TECHNICAL DATA
Recommended Operating Range, m3/d 60 – 100 Housing pressure limit, atm 408
Best Efficiency Point (BEP), m3/d 78 Minimum Casing ID, mm 112
Head @BEP, m 4.9 Shaft Diameter, mm 17
Power @BEP, kW 0.08 Shaft strength, kW Standard 80
Best Efficiency, % 54.3 HSS 100
Nominal Housing Diameter (O.D.), mm 86 USS 120
PUMP CONFIGURATIONS
ESP-R 362-130
TECHNICAL DATA
Recommended Operating Range, bpd 75 – 170 Housing pressure limit, psi 6,000
Best Efficiency Point (BEP), bpd 130 Minimum Casing ID, in (with 406/461 ser. motor) 4.79/4.87
Head @BEP, ft 23.3 Shaft Diameter, in. 0.67
Power @BEP, hp 0.08 Shaft strength, hp Standard 130
Best Efficiency, % 27.2 HSS 163
Nominal Housing Diameter (O.D.), in. 3.62 USS 195
TECHNICAL DATA
Recommended Operating Range, m3/d 10 – 22.5 Housing pressure limit, atm 408
Best Efficiency Point (BEP), m3/d 17 Minimum Casing ID, mm (with 406/461 ser. motor) 121.7/123.7
Head @BEP, m 4.9 Shaft Diameter, mm 17
Power @BEP, kW 0.04 Shaft strength, kW Standard 80
Best Efficiency, % 27.2 HSS 100
Nominal Housing Diameter (O.D.), mm 92 USS 120
PUMP CONFIGURATIONS
ESP-R 362-210
Floater, Compression
Wear resistant
TECHNICAL DATA
Recommended Operating Range WR, bpd 113 – 287 Housing pressure limit, psi 6,000
Recommended Operating Range FL, bpd 136 – 287 Minimum Casing ID, in (with 406/461 ser. motor) 4.79/4.87
Best Efficiency Point (BEP), bpd 209 Shaft Diameter, in. 0.67
Head @BEP, ft 23.7 Shaft strength, hp Standard 130
Power @BEP, hp 0.10 HSS 163
Best Efficiency, % 35.3 USS 195
Nominal Housing Diameter (O.D.), in. 3.62
Floater, Compression
Wear resistant
TECHNICAL DATA
Recommended Operating Range WR, bpd 15 – 38 Housing pressure limit, atm 408
Recommended Operating Range FL, bpd 18 – 38 Minimum Casing ID, mm (with 406/461 ser. motor) 121.7/123.7
Best Efficiency Point (BEP), m /d
3
28 Shaft Diameter, mm 17
Head @BEP, m 5.0 Shaft strength, kW Standard 80
Power @BEP, kW 0.04 HSS 100
Best Efficiency, % 35.3 USS 120
Nominal Housing Diameter (O.D.), mm 92
PUMP CONFIGURATIONS
ESP-R 362-340
TECHNICAL DATA
Recommended Operating Range, bpd 257 – 423 Housing pressure limit, psi 6,000
Best Efficiency Point (BEP), bpd 340 Minimum Casing ID, in (with 406/461 ser. motor) 4.79/4.87
Head @BEP, ft 26.4 Shaft Diameter, in. 0.67
Power @BEP, hp 0.15 Shaft strength, hp Standard 130
Best Efficiency, % 44.5 HSS 163
Nominal Housing Diameter (O.D.), in. 3.62 USS 195
TECHNICAL DATA
PUMP CONFIGURATIONS
Stages Length Weight
Part number Housing size
Compression Floater m ft. kg lb.
2260000 30 94 3.20 10.50 114.0 251.3
2261000 35 109 3.70 12.14 129.0 284.4
2262000 40 127 4.20 13.78 145.0 319.7
2263000 45 142 4.70 15.42 160.0 352.7
2264000 50 157 5.20 17.06 176.0 388.0
2265000 30 103 3.20 10.50 117.0 257.9
2266000 35 121 3.70 12.14 133.0 293.2
2267000 40 139 4.20 13.78 149.0 328.5
2268000 45 156 4.70 15.42 165.0 363.8
2269000 50 174 5.20 17.06 181.0 399.0
2270000 55 192 5.70 18.70 197.0 434.3
2271000 60 210 6.20 20.34 213.0 469.6
ESP-R 362-410
Floater, Compression
Wear resistant
TECHNICAL DATA
Recommended Operating Range WR, bpd 91 – 566 Housing pressure limit, psi 6,000
Recommended Operating Range FL, bpd 302 – 566 Minimum Casing ID, in (with 406/461 ser. motor) 4.79/4.87
Best Efficiency Point (BEP), bpd 414 Shaft Diameter, in. 0.67
Head @BEP, ft 27.3 Shaft strength, hp Standard 130
Power @BEP, hp 0.16 HSS 163
Best Efficiency, % 52.5 USS 195
Nominal Housing Diameter (O.D.), in. 3.62
Floater, Compression
Wear resistant
TECHNICAL DATA
Recommended Operating Range WR, m3/d 12 – 75 Housing pressure limit, atm 408
Recommended Operating Range FL, m3/d 40 – 75 Minimum Casing ID, mm (with 406/461 ser. motor) 121.7/123.7
Best Efficiency Point (BEP), m /d 3
55 Shaft Diameter, mm 17
Head @BEP, m 5.8 Shaft strength, kW Standard 80
Power @BEP, kW 0.07 HSS 100
Best Efficiency, % 52.5 USS 120
Nominal Housing Diameter (O.D.), mm 92
PUMP CONFIGURATIONS
ESP-R 362-600
TECHNICAL DATA
Recommended Operating Range, bpd 453 – 755 Housing pressure limit, psi 6,000
Best Efficiency Point (BEP), bpd 613 Minimum Casing ID, in (with 406/461 ser. motor) 4.79/4.87
Head @BEP, ft 27.5 Shaft Diameter, in. 0.67
Power @BEP, hp 0.22 Shaft strength, hp Standard 130
Best Efficiency, % 57.2 HSS 163
Nominal Housing Diameter (O.D.), in. 3.62 USS 195
TECHNICAL DATA
Recommended Operating Range, m3/d 60 – 100 Housing pressure limit, atm 408
Best Efficiency Point (BEP), m3/d 81 Minimum Casing ID, mm (with 406/461 ser. motor) 121.7/123.7
Head @BEP, m 5.8 Shaft Diameter, mm 17
Power @BEP, kW 0.09 Shaft strength, kW Standard 80
Best Efficiency, % 57.2 HSS 100
Nominal Housing Diameter (O.D.), mm 92 USS 120
PUMP CONFIGURATIONS
ESP-R 362-750
TECHNICAL DATA
Recommended Operating Range, bpd 604 – 943 Housing pressure limit, psi 6,000
Best Efficiency Point (BEP), bpd 747 Minimum Casing ID, in (with 406/461 ser. motor) 4.79/4.87
Head @BEP, ft 27.9 Shaft Diameter, in. 0.67
Power @BEP, hp 0.27 Shaft strength, hp Standard 130
Best Efficiency, % 56.1 HSS 163
Nominal Housing Diameter (O.D.), in. 3.62 USS 195
TECHNICAL DATA
Recommended Operating Range, m3/d 80 – 125 Housing pressure limit, atm 408
Best Efficiency Point (BEP), m3/d 99 Minimum Casing ID, mm (with 406/461 ser. motor) 121.7/123.7
Head @BEP, m 5.9 Shaft Diameter, mm 17
Power @BEP, kW 0.12 Shaft strength, kW Standard 80
Best Efficiency, % 56.1 HSS 100
Nominal Housing Diameter (O.D.), mm 92 USS 120
PUMP CONFIGURATIONS
ESP-R 362-940
Wear resistant
Floater
TECHNICAL DATA
Recommended Operating Range WR, bpd 453 – 1,208 Housing pressure limit, psi 6,000
Recommended Operating Range FL, bpd 717 – 1,208 Minimum Casing ID, in (with 406/461 ser. motor) 4.79/4.87
Best Efficiency Point (BEP), bpd 943 Shaft Diameter, in. 0.67
Head @BEP, ft 22.2 Shaft strength, hp Standard 130
Power @BEP, hp 0.26 HSS 163
Best Efficiency, % 58.9 USS 195
Nominal Housing Diameter (O.D.), in. 3.62
Wear resistant
Floater
TECHNICAL DATA
Recommended Operating Range WR, m3/d 60 – 160 Housing pressure limit, atm 408
Recommended Operating Range FL, m3/d 95 – 160 Minimum Casing ID, mm (with 406/461 ser. motor) 121.7/123.7
Best Efficiency Point (BEP), m /d
3
125 Shaft Diameter, mm 17
Head @BEP, m 4.7 Shaft strength, kW Standard 80
Power @BEP, kW 0.11 HSS 100
Best Efficiency, % 58.9 USS 120
Nominal Housing Diameter (O.D.), mm 92
PUMP CONFIGURATIONS
ESP-R 362-950
TECHNICAL DATA
Recommended Operating Range, bpd 604 – 1,208 Housing pressure limit, psi 6,000
Best Efficiency Point (BEP), bpd 970 Minimum Casing ID, in (with 406/461 ser. motor) 4.79/4.87
Head @BEP, ft 27.9 Shaft Diameter, in. 0.67
Power @BEP, hp 0.38 Shaft strength, hp Standard 130
Best Efficiency, % 53.1 HSS 163
Nominal Housing Diameter (O.D.), in. 3.62 USS 195
TECHNICAL DATA
Recommended Operating Range, m3/d 80 – 160 Housing pressure limit, atm 408
Best Efficiency Point (BEP), m3/d 128 Minimum Casing ID, mm (with 406/461 ser. motor) 121.7/123.7
Head @BEP, m 5.9 Shaft Diameter, mm 17
Power @BEP, kW 0.16 Shaft strength, kW Standard 80
Best Efficiency, % 53.1 HSS 100
Nominal Housing Diameter (O.D.), mm 92 USS 120
PUMP CONFIGURATIONS
ESP-R 362-1200
TECHNICAL DATA
Recommended Operating Range, bpd 906 – 1,510 Housing pressure limit, psi 6,000
Best Efficiency Point (BEP), bpd 1,187 Minimum Casing ID, in (with 406/461 ser. motor) 4.79/4.87
Head @BEP, ft 23.9 Shaft Diameter, in. 0.79
Power @BEP, hp 0.42 Shaft strength, hp Standard 203
Best Efficiency, % 50.1 HSS 252
Nominal Housing Diameter (O.D.), in. 3.62 USS 301
TECHNICAL DATA
Recommended Operating Range, m3/d 120 – 200 Housing pressure limit, atm 408
Best Efficiency Point (BEP), m3/d 157 Minimum Casing ID, mm (with 406/461 ser. motor) 121.7/123.7
Head @BEP, m 5.0 Shaft Diameter, mm 20
Power @BEP, kW 0.18 Shaft strength, kW Standard 125
Best Efficiency, % 50.1 HSS 155
Nominal Housing Diameter (O.D.), mm 92 USS 185
PUMP CONFIGURATIONS
ESP-R 362-1400
TECHNICAL DATA
Recommended Operating Range, bpd 981 – 1,736 Housing pressure limit, psi 6,000
Best Efficiency Point (BEP), bpd 1,466 Minimum Casing ID, in (with 406/461 ser. motor) 4.79/4.87
Head @BEP, ft 19.8 Shaft Diameter, in. 0.79
Power @BEP, hp 0.38 Shaft strength, hp Standard 203
Best Efficiency, % 56.6 HSS 252
Nominal Housing Diameter (O.D.), in. 3.62 USS 301
TECHNICAL DATA
Recommended Operating Range, m3/d 130 – 231 Housing pressure limit, atm 408
Best Efficiency Point (BEP), m3/d 194 Minimum Casing ID, mm (with 406/461 ser. motor) 121.7/123.7
Head @BEP, m 4.2 Shaft Diameter, mm 20
Power @BEP, kW 0.16 Shaft strength, kW Standard 125
Best Efficiency, % 56.6 HSS 155
Nominal Housing Diameter (O.D.), mm 92 USS 185
PUMP CONFIGURATIONS
ESP-R 362-2100
Floater, Compression
Wear resistant
TECHNICAL DATA
Recommended Operating Range WR, bpd 1,057 – 2,642 Housing pressure limit, psi 6,000
Recommended Operating Range FL, bpd 1,585 – 2,642 Minimum Casing ID, in (with 406/461 ser. motor) 4.79/4.87
Best Efficiency Point (BEP), bpd 2,076 Shaft Diameter, in. 0.79
Head @BEP, ft 18.2 Shaft strength, hp Standard 203
Power @BEP, hp 0.50 HSS 252
Best Efficiency, % 55.2 USS 301
Nominal Housing Diameter (O.D.), in. 3.62
Floater, Compression
Wear resistant
TECHNICAL DATA
Recommended Operating Range WR, m3/d 140 - 350 Housing pressure limit, atm 408
Recommended Operating Range FL, m3/d 210 - 350 Minimum Casing ID, mm (with 406/461 ser. motor) 121.7/123.7
Best Efficiency Point (BEP), m /d
3
275 Shaft Diameter, mm 20
Head @BEP, m 3.8 Shaft strength, kW Standard 125
Power @BEP, kW 0.22 HSS 155
Best Efficiency, % 55.2 USS 185
Nominal Housing Diameter (O.D.), mm 92
PUMP CONFIGURATIONS
ESP-R 406-270
TECHNICAL DATA
Recommended Operating Range, bpd 189 – 340 Housing pressure limit, psi 6,000
Best Efficiency Point (BEP), bpd 273 Minimum Casing ID, in (with 406/461 ser. motor) 4.87/5.15
Head @BEP, ft 30.7 Shaft Diameter, in. 0.67
Power @BEP, hp 0.18 Shaft strength, hp Standard 130
Best Efficiency, % 33.6 HSS 163
Nominal Housing Diameter (O.D.), in. 4.06 USS 195
TECHNICAL DATA
PUMP CONFIGURATIONS
ESP-R 406-450
Floater, Compression
Wear resistant
TECHNICAL DATA
Recommended Operating Range WR, bpd 226 – 604 Housing pressure limit, psi 6,000
Recommended Operating Range FL, bpd 302 – 604 Minimum Casing ID, in (with 406/461 ser. motor) 4.87/5.15
Best Efficiency Point (BEP), bpd 468 Shaft Diameter, in. 0.67
Head @BEP, ft 31.1 Shaft strength, hp Standard 130
Power @BEP, hp 0.22 HSS 163
Best Efficiency, % 48.9 USS 195
Nominal Housing Diameter (O.D.), in. 4.06
Floater, Compression
Wear resistant
TECHNICAL DATA
Recommended Operating Range WR, m3/d 30 – 80 Housing pressure limit, atm 408
Recommended Operating Range FL, m3/d 40 – 80 Minimum Casing ID, mm (with 406/461 ser. motor) 123.7/130.7
Best Efficiency Point (BEP), m /d
3
62 Shaft Diameter, mm 17
Head @BEP, m 6.6 Shaft strength, kW Standard 80
Power @BEP, kW 0.09 HSS 100
Best Efficiency, % 48.9 USS 120
Nominal Housing Diameter (O.D.), mm 103
PUMP CONFIGURATIONS
ESP-R 406-600
Floater, Compression
Wear resistant
TECHNICAL DATA
Recommended Operating Range WR, bpd 302 – 755 Housing pressure limit, psi 6,000
Recommended Operating Range FL, bpd 453 – 755 Minimum Casing ID, in (with 406/461 ser. motor) 4.87/5.15
Best Efficiency Point (BEP), bpd 604 Shaft Diameter, in. 0.67
Head @BEP, ft 31.2 Shaft strength, hp Standard 130
Power @BEP, hp 0.28 HSS 163
Best Efficiency, % 48.9 USS 195
Nominal Housing Diameter (O.D.), in. 4.06
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 100
ESP Components – Pumps RIMERA OVERSEAS DMCC
Floater, Compression
Wear resistant
TECHNICAL DATA
Recommended Operating Range WR, m3/d 40 – 100 Housing pressure limit, atm 408
Recommended Operating Range FL, m3/d 60 – 100 Minimum Casing ID, mm (with 406/461 ser. motor) 123.7/130.7
Best Efficiency Point (BEP), m /d
3
80 Shaft Diameter, mm 17
Head @BEP, m 6.6 Shaft strength, kW Standard 80
Power @BEP, kW 0.12 HSS 100
Best Efficiency, % 48.9 USS 120
Nominal Housing Diameter (O.D.), mm 103
PUMP CONFIGURATIONS
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 101
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 102
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 103
ESP Components – Pumps RIMERA OVERSEAS DMCC
ESP-R 406-700
Floater, Compression
Wear resistant
TECHNICAL DATA
Recommended Operating Range WR, bpd 377 – 981 Housing pressure limit, psi 6,000
Recommended Operating Range FL, bpd 530 – 981 Minimum Casing ID, in (with 406/461 ser. motor) 4.87/5.15
Best Efficiency Point (BEP), bpd 694 Shaft Diameter, in. 0.67
Head @BEP, ft 37.7 Shaft strength, hp Standard 130
Power @BEP, hp 0.36 HSS 163
Best Efficiency, % 53.4 USS 195
Nominal Housing Diameter (O.D.), in. 4.06
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 104
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 105
ESP Components – Pumps RIMERA OVERSEAS DMCC
Floater, Compression
Wear resistant
TECHNICAL DATA
Recommended Operating Range WR, m3/d 50 – 130 Housing pressure limit, atm 408
Recommended Operating Range FL, m3/d 70 – 130 Minimum Casing ID, mm (with 406/461 ser. motor) 123.7/130.7
Best Efficiency Point (BEP), m /d
3
92 Shaft Diameter, mm 17
Head @BEP, m 8.0 Shaft strength, kW Standard 80
Power @BEP, kW 0.16 HSS 100
Best Efficiency, % 53.4 USS 120
Nominal Housing Diameter (O.D.), mm 103
PUMP CONFIGURATIONS
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 106
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 107
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 108
ESP Components – Pumps RIMERA OVERSEAS DMCC
ESP-R 406-900
Floater, Compression
Wear resistant
TECHNICAL DATA
Recommended Operating Range WR, bpd 453 – 1,324 Housing pressure limit, psi 6,000
Recommended Operating Range FL, bpd 680 – 1,324 Minimum Casing ID, in (with 406/461 ser. motor) 4.87/5.15
Best Efficiency Point (BEP), bpd 921 Shaft Diameter, in. 0.79
Head @BEP, ft 38.4 Shaft strength, hp Standard 203
Power @BEP, hp 0.46 HSS 252
Best Efficiency, % 57.0 USS 301
Nominal Housing Diameter (O.D.), in. 4.06
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 109
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 110
ESP Components – Pumps RIMERA OVERSEAS DMCC
Floater, Compression
Wear resistant
TECHNICAL DATA
Recommended Operating Range WR, m3/d 60 – 160 Housing pressure limit, atm 408
Recommended Operating Range FL, m3/d 90 – 160 Minimum Casing ID, mm (with 406/461 ser. motor) 123.7/130.7
Best Efficiency Point (BEP), m /d
3
122 Shaft Diameter, mm 20
Head @BEP, m 8.1 Shaft strength, kW Standard 125
Power @BEP, kW 0.20 HSS 155
Best Efficiency, % 57.0 USS 185
Nominal Housing Diameter (O.D.), mm 103
PUMP CONFIGURATIONS
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 111
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 112
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 113
ESP Components – Pumps RIMERA OVERSEAS DMCC
ESP-R 406-1200
Wear resistant
Floater
TECHNICAL DATA
Recommended Operating Range WR, bpd 906 – 1,510 Housing pressure limit, psi 6,000
Recommended Operating Range FL, bpd 604 – 1,510 Minimum Casing ID, in (with 406/461 ser. motor) 4.87/5.15
Best Efficiency Point (BEP), bpd 1,208 Shaft Diameter, in. 0.79
Head @BEP, ft 28.3 Shaft strength, hp Standard 203
Power @BEP, hp 0.40 HSS 252
Best Efficiency, % 62.4 USS 301
Nominal Housing Diameter (O.D.), in. 4.06
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 114
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 115
ESP Components – Pumps RIMERA OVERSEAS DMCC
Wear resistant
Floater
TECHNICAL DATA
Recommended Operating Range WR, m3/d 80 – 200 Housing pressure limit, atm 408
Recommended Operating Range FL, m3/d 120 - 200 Minimum Casing ID, mm (with 406/461 ser. motor) 123.7/130.7
Best Efficiency Point (BEP), m /d
3
160 Shaft Diameter, mm 20
Head @BEP, m 6.0 Shaft strength, kW Standard 125
Power @BEP, kW 0.17 HSS 155
Best Efficiency, % 62.4 USS 185
Nominal Housing Diameter (O.D.), mm 103
PUMP CONFIGURATIONS
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 116
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 117
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 118
ESP Components – Pumps RIMERA OVERSEAS DMCC
ESP-R 406-1250
TECHNICAL DATA
Recommended Operating Range, bpd 906 – 1,510 Housing pressure limit, psi 6,000
Best Efficiency Point (BEP), bpd 1,252 Minimum Casing ID, in (with 406/461 ser. motor) 4.87/5.15
Head @BEP, ft 29.6 Shaft Diameter, in. 0.79
Power @BEP, hp 0.46 Shaft strength, hp Standard 203
Best Efficiency, % 59.8 HSS 252
Nominal Housing Diameter (O.D.), in. 4.06 USS 301
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 119
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 120
ESP Components – Pumps RIMERA OVERSEAS DMCC
TECHNICAL DATA
Recommended Operating Range, m3/d 120 – 200 Housing pressure limit, atm 408
Best Efficiency Point (BEP), m3/d 166 Minimum Casing ID, mm (with 406/461 ser. motor) 123.7/130.7
Head @BEP, m 6.3 Shaft Diameter, mm 20
Power @BEP, kW 0.20 Shaft strength, kW Standard 125
Best Efficiency, % 59.8 HSS 155
Nominal Housing Diameter (O.D.), mm 103 USS 185
PUMP CONFIGURATIONS
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 121
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 122
ESP Components – Pumps RIMERA OVERSEAS DMCC
ESP-R 406-1500
Floater, Compression
Wear resistant
TECHNICAL DATA
Recommended Operating Range WR, bpd 755 – 1,887 Housing pressure limit, psi 6,000
Recommended Operating Range FL, bpd 943 – 1,887 Minimum Casing ID, in (with 406/461 ser. motor) 4.87/5.15
Best Efficiency Point (BEP), bpd 1,472 Shaft Diameter, in. 0.79
Head @BEP, ft 28.4 Shaft strength, hp Standard 203
Power @BEP, hp 0.50 HSS 252
Best Efficiency, % 61.9 USS 301
Nominal Housing Diameter (O.D.), in. 4.06
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 123
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 124
ESP Components – Pumps RIMERA OVERSEAS DMCC
Floater, Compression
Wear resistant
TECHNICAL DATA
Recommended Operating Range WR, m3/d 100 – 250 Housing pressure limit, atm 408
Recommended Operating Range FL, m3/d 125 – 250 Minimum Casing ID, mm (with 406/461 ser. motor) 123.7/130.7
Best Efficiency Point (BEP), m /d
3
195 Shaft Diameter, mm 20
Head @BEP, m 6.0 Shaft strength, kW Standard 125
Power @BEP, kW 0.22 HSS 155
Best Efficiency, % 61.9 USS 185
Nominal Housing Diameter (O.D.), mm 103
PUMP CONFIGURATIONS
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 125
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 126
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 127
ESP Components – Pumps RIMERA OVERSEAS DMCC
ESP-R 406-1900
TECHNICAL DATA
Recommended Operating Range, bpd 1,359 – 2,264 Housing pressure limit, psi 6,000
Best Efficiency Point (BEP), bpd 1,893 Minimum Casing ID, in (with 406/461 ser. motor) 4.87/5.15
Head @BEP, ft 28.7 Shaft Diameter, in. 0.87
Power @BEP, hp 0.74 Shaft strength, hp Standard 301
Best Efficiency, % 54.0 HSS 367
Nominal Housing Diameter (O.D.), in. 4.06 USS 432
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 128
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 129
ESP Components – Pumps RIMERA OVERSEAS DMCC
TECHNICAL DATA
Recommended Operating Range, m3/d 180 – 300 Housing pressure limit, atm 408
Best Efficiency Point (BEP), m3/d 251 Minimum Casing ID, mm (with 406/461 ser. motor) 123.7/130.7
Head @BEP, m 6.1 Shaft Diameter, mm 22
Power @BEP, kW 0.32 Shaft strength, kW Standard 185
Best Efficiency, % 54.0 HSS 225
Nominal Housing Diameter (O.D.), mm 103 USS 265
PUMP CONFIGURATIONS
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 130
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 131
ESP Components – Pumps RIMERA OVERSEAS DMCC
ESP-R 406-1950
TECHNICAL DATA
Recommended Operating Range, bpd 1,434 – 2,566 Housing pressure limit, psi 6,000
Best Efficiency Point (BEP), bpd 1,943 Minimum Casing ID, in (with 406/461 ser. motor) 4.87/5.15
Head @BEP, ft 25.4 Shaft Diameter, in. 0.87
Power @BEP, hp 0.59 Shaft strength, hp Standard 301
Best Efficiency, % 61.9 HSS 367
Nominal Housing Diameter (O.D.), in. 4.06 USS 432
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 132
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 133
ESP Components – Pumps RIMERA OVERSEAS DMCC
TECHNICAL DATA
Recommended Operating Range, m3/d 190 – 341 Housing pressure limit, atm 408
Best Efficiency Point (BEP), m3/d 257 Minimum Casing ID, mm (with 406/461 ser. motor) 123.7/130.7
Head @BEP, m 5.4 Shaft Diameter, mm 22
Power @BEP, kW 0.25 Shaft strength, kW Standard 185
Best Efficiency, % 61.9 HSS 225
Nominal Housing Diameter (O.D.), mm 103 USS 265
PUMP CONFIGURATIONS
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 134
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 135
ESP Components – Pumps RIMERA OVERSEAS DMCC
ESP-R 406-1960
Wear resistant
Floater
TECHNICAL DATA
Recommended Operating Range WR, bpd 943 – 2,378 Housing pressure limit, psi 6,000
Recommended Operating Range FL, bpd 1,434 – 2,378 Minimum Casing ID, in (with 406/461 ser. motor) 4.87/5.15
Best Efficiency Point (BEP), bpd 1,962 Shaft Diameter, in. 0.87
Head @BEP, ft 21.6 Shaft strength, hp Standard 301
Power @BEP, hp 0.48 HSS 367
Best Efficiency, % 64.6 USS 432
Nominal Housing Diameter (O.D.), in. 4.06
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 136
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 137
ESP Components – Pumps RIMERA OVERSEAS DMCC
Wear resistant
Floater
TECHNICAL DATA
Recommended Operating Range WR, m3/d 125 – 315 Housing pressure limit, atm 408
Recommended Operating Range FL, m3/d 190 – 315 Minimum Casing ID, mm (with 406/461 ser. motor) 123.7/130.7
Best Efficiency Point (BEP), m /d
3
260 Shaft Diameter, mm 22
Head @BEP, m 4.6 Shaft strength, kW Standard 185
Power @BEP, kW 0.1 HSS 225
Best Efficiency, % 64.6 USS 265
Nominal Housing Diameter (O.D.), mm 103
PUMP CONFIGURATIONS
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 138
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 139
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 140
ESP Components – Pumps RIMERA OVERSEAS DMCC
ESP-R 406-2400
TECHNICAL DATA
Recommended Operating Range, bpd 1,811 – 2,868 Housing pressure limit, psi 6,000
Best Efficiency Point (BEP), bpd 2,420 Minimum Casing ID, in (with 406/461 ser. motor) 4.87/5.15
Head @BEP, ft 24.5 Shaft Diameter, in. 0.87
Power @BEP, hp 0.77 Shaft strength, hp Standard 301
Best Efficiency, % 56.9 HSS 367
Nominal Housing Diameter (O.D.), in. 4.06 USS 432
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 141
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 142
ESP Components – Pumps RIMERA OVERSEAS DMCC
TECHNICAL DATA
Recommended Operating Range, m3/d 241 – 381 Housing pressure limit, atm 408
Best Efficiency Point (BEP), m3/d 321 Minimum Casing ID, mm (with 406/461 ser. motor) 123.7/130.7
Head @BEP, m 5.2 Shaft Diameter, mm 22
Power @BEP, kW 0.33 Shaft strength, kW Standard 185
Best Efficiency, % 56.9 HSS 225
Nominal Housing Diameter (O.D.), mm 103 USS 265
PUMP CONFIGURATIONS
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 143
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 144
ESP Components – Pumps RIMERA OVERSEAS DMCC
ESP-R 406-3100
TECHNICAL DATA
Recommended Operating Range, bpd 2,264 – 3,774 Housing pressure limit, psi 6,000
Best Efficiency Point (BEP), bpd 3,088 Minimum Casing ID, in (with 406/461 ser. motor) 4.87/5.15
Head @BEP, ft 23.1 Shaft Diameter, in. 0.87
Power @BEP, hp 0.84 Shaft strength, hp Standard 301
Best Efficiency, % 63.1 HSS 367
Nominal Housing Diameter (O.D.), in. 4.06 USS 432
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 145
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 146
ESP Components – Pumps RIMERA OVERSEAS DMCC
TECHNICAL DATA
Recommended Operating Range, m3/d 301 – 501 Housing pressure limit, atm 408
Best Efficiency Point (BEP), m3/d 409 Minimum Casing ID, mm (with 406/461 ser. motor) 123.7/130.7
Head @BEP, m 4.9 Shaft Diameter, mm 22
Power @BEP, kW 0.36 Shaft strength, kW Standard 185
Best Efficiency, % 63.1 HSS 225
Nominal Housing Diameter (O.D.), mm 103 USS 265
PUMP CONFIGURATIONS
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 147
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 148
ESP Components – Pumps RIMERA OVERSEAS DMCC
ESP-R 406-3700
TECHNICAL DATA
Recommended Operating Range, bpd 2,830 – 4,906 Housing pressure limit, psi 6,000
Best Efficiency Point (BEP), bpd 3,717 Minimum Casing ID, in (with 406/461 ser. motor) 4.87/5.15
Head @BEP, ft 23.8 Shaft Diameter, in. 0.87
Power @BEP, hp 1.17 Shaft strength, hp Standard 440
Best Efficiency, % 56.0 HSS 538
Nominal Housing Diameter (O.D.), in. 4.06 USS 636
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 149
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 150
ESP Components – Pumps RIMERA OVERSEAS DMCC
TECHNICAL DATA
Recommended Operating Range, m3/d 375 – 650 Housing pressure limit, atm 408
Best Efficiency Point (BEP), m3/d 492 Minimum Casing ID, mm (with 406/461 ser. motor) 123.7/130.7
Head @BEP, m 5.0 Shaft Diameter, mm 22
Power @BEP, kW 0.50 Shaft strength, kW Standard 270
Best Efficiency, % 56.0 HSS 330
Nominal Housing Diameter (O.D.), mm 103 USS 390
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 151
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 152
ESP Components – Pumps RIMERA OVERSEAS DMCC
ESP-R 406-3750
Floater, Compression
Wear resistant
TECHNICAL DATA
Recommended Operating Range WR, bpd 1,510 – 4,717 Housing pressure limit, psi 6,000
Recommended Operating Range FL, bpd 2,830 – 4,717 Minimum Casing ID, in (with 406/461 ser. motor) 4.87/5.15
Best Efficiency Point (BEP), bpd 3,774 Shaft Diameter, in. 0.87
Head @BEP, ft 30.7 Shaft strength, hp Standard 440
Power @BEP, hp 1.30 HSS 538
Best Efficiency, % 65.9 USS 636
Nominal Housing Diameter (O.D.), in. 4.06
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 153
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 154
ESP Components – Pumps RIMERA OVERSEAS DMCC
Floater, Compression
Wear resistant
TECHNICAL DATA
Recommended Operating Range WR, m3/d 200 – 625 Housing pressure limit, atm 408
Recommended Operating Range FL, m3/d 375 – 625 Minimum Casing ID, mm (with 406/461 ser. motor) 123.7/130.7
Best Efficiency Point (BEP), m /d 3
500 Shaft Diameter, mm 22
Head @BEP, m 6.5 Shaft strength, kW Standard 270
Power @BEP, kW 0.56 HSS 330
Best Efficiency, % 65.9 USS 390
Nominal Housing Diameter (O.D.), mm 103
PUMP CONFIGURATIONS
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 155
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 156
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 157
ESP Components – Pumps RIMERA OVERSEAS DMCC
ESP-R 406-5500
Wear resistant
Compression
TECHNICAL DATA
Recommended Operating Range WR, bpd 3,019 – 7,246 Housing pressure limit, psi 6,000
Recommended Operating Range C, bpd 4,831 – 7,246 Minimum Casing ID, in (with 406/461 ser. motor) 4.87/5.15
Best Efficiency Point (BEP), bpd 5,469 Shaft Diameter, in. 0.98
Head @BEP, ft 23.4 Shaft strength, hp Standard 440
Power @BEP, hp 1.49 HSS 538
Best Efficiency, % 63.6 USS 636
Nominal Housing Diameter (O.D.), in. 4.06
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 158
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 159
ESP Components – Pumps RIMERA OVERSEAS DMCC
Wear resistant
Compression
TECHNICAL DATA
Recommended Operating Range WR, bpd 640 – 960 Housing pressure limit, atm 408
Recommended Operating Range C, bpd 400 – 960 Minimum Casing ID, mm (with 406/461 ser. motor) 123.7/130.7
Best Efficiency Point (BEP), m /d
3
725 Shaft Diameter, mm 25
Head @BEP, m 5.0 Shaft strength, kW Standard 270
Power @BEP, kW 0.64 HSS 330
Best Efficiency, % 63.6 USS 390
Nominal Housing Diameter (O.D.), mm 103
PUMP CONFIGURATIONS
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 160
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 161
ESP Components – Pumps RIMERA OVERSEAS DMCC
ESP-R 449-5700
Floater, Compression
Wear resistant
TECHNICAL DATA
Recommended Operating Range WR, bpd 3,019 – 7,548 Housing pressure limit, psi 6,000
Recommended Operating Range FL, bpd 4,529 – 7,548 Minimum Casing ID, in 5.84
Best Efficiency Point (BEP), bpd 5,714 Shaft Diameter, in. 1.10
Head @BEP, ft 31.7 Shaft strength, hp Standard 603
Power @BEP, hp 2.14 HSS 734
Best Efficiency, % 62.5 USS 848
Nominal Housing Diameter (O.D.), in. 4.49
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 162
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 163
ESP Components – Pumps RIMERA OVERSEAS DMCC
Floater, Compression
Wear resistant
TECHNICAL DATA
Recommended Operating Range WR, m3/d 400 – 1,000 Housing pressure limit, atm 408
Recommended Operating Range FL, m3/d 600 – 1,000 Minimum Casing ID, mm 148.3
Best Efficiency Point (BEP), m3/d 757 Shaft Diameter, mm 28
Head @BEP, m 6.7 Shaft strength, kW Standard 370
Power @BEP, kW 0.92 HSS 450
Best Efficiency, % 62.5 USS 520
Nominal Housing Diameter (O.D.), mm 114
PUMP CONFIGURATIONS
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 164
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 165
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 166
ESP Components – Pumps RIMERA OVERSEAS DMCC
ESP-R 449-9400
TECHNICAL DATA
Recommended Operating Range, bpd 7,170 – 11,699 Housing pressure limit, psi 6,000
Best Efficiency Point (BEP), bpd 9,435 Minimum Casing ID, in 5.84
Head @BEP, ft 24.1 Shaft Diameter, in. 1.10
Power @BEP, hp 2.79 Shaft strength, hp Standard 603
Best Efficiency, % 60.1 HSS 734
Nominal Housing Diameter (O.D.), in. 4.49 USS 848
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 167
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 168
ESP Components – Pumps RIMERA OVERSEAS DMCC
TECHNICAL DATA
Recommended Operating Range, m3/d 952 – 1,553 Housing pressure limit, atm 408
Best Efficiency Point (BEP), m3/d 1,250 Minimum Casing ID, mm 148.3
Head @BEP, m 5.1 Shaft Diameter, mm 28
Power @BEP, kW 1.20 Shaft strength, kW Standard 370
Best Efficiency, % 60.1 HSS 450
Nominal Housing Diameter (O.D.), mm 114 USS 520
PUMP CONFIGURATIONS
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 169
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 170
ESP Components – Pumps RIMERA OVERSEAS DMCC
ESP-R 449-7500
Wear resistant
FSP
TECHNICAL DATA
Recommended Operating Range WR, bpd 3,774 – 9,057 Housing pressure limit, psi 6,000
Recommended Operating Range FSP, bpd 6,415 – 9,057 Minimum Casing ID, in 5.84
Best Efficiency Point (BEP), bpd 7,548 Shaft Diameter, in. 1.10
Head @BEP, ft 20.3 Shaft strength, hp Standard 603
Power @BEP, hp 1.89 HSS 734
Best Efficiency, % 60.0 USS 848
Nominal Housing Diameter (O.D.), in. 4.49
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 171
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 172
ESP Components – Pumps RIMERA OVERSEAS DMCC
Wear resistant
FSP
TECHNICAL DATA
Recommended Operating Range WR, m3/d 500 – 1,200 Housing pressure limit, atm 408
Recommended Operating Range FSP, m3/d 850 – 1,200 Minimum Casing ID, mm 148.3
Best Efficiency Point (BEP), m3/d 1,000 Shaft Diameter, mm 28
Head @BEP, m 4.3 Shaft strength, kW Standard 370
Power @BEP, kW 0.81 HSS 450
Best Efficiency, % 60.0 USS 520
Nominal Housing Diameter (O.D.), mm 114
PUMP CONFIGURATIONS
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 173
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 174
ESP Components – Pumps RIMERA OVERSEAS DMCC
ESP-R 449-9450
Wear resistant
Floater
TECHNICAL DATA
Recommended Operating Range WR, bpd 4,717 – 11,699 Housing pressure limit, psi 6,000
Recommended Operating Range FL, bpd 7,171 – 11,699 Minimum Casing ID, in 5.84
Best Efficiency Point (BEP), bpd 9,435 Shaft Diameter, in. 1.10
Head @BEP, ft 25.0 Shaft strength, hp Standard 603
Power @BEP, hp 2.56 HSS 734
Best Efficiency, % 68.0 USS 848
Nominal Housing Diameter (O.D.), in. 4.49
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 175
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 176
ESP Components – Pumps RIMERA OVERSEAS DMCC
Wear resistant
Floater
TECHNICAL DATA
Recommended Operating Range WR, m3/d 625 – 1,550 Housing pressure limit, atm 408
Recommended Operating Range FL, m3/d 950 – 1,550 Minimum Casing ID, mm 148.3
Best Efficiency Point (BEP), m3/d 1,250 Shaft Diameter, mm 28
Head @BEP, m 5.3 Shaft strength, kW Standard 370
Power @BEP, kW 1.11 HSS 450
Best Efficiency, % 68.0 USS 520
Nominal Housing Diameter (O.D.), mm 114
PUMP CONFIGURATIONS
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 177
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 178
ESP Components – Pumps RIMERA OVERSEAS DMCC
ESP-R 535-2400
Wear resistant
Floater
TECHNICAL DATA
Recommended Operating Range WR, bpd 1,208 – 3,019 Housing pressure limit, psi 6,000
Recommended Operating Range FL, bpd 1,811 – 3,019 Minimum Casing ID, in 6.50
Best Efficiency Point (BEP), bpd 2,415 Shaft Diameter, in. 0.87
Head @BEP, ft 48.2 Shaft strength, hp Standard 301
Power @BEP, hp 1.30 HSS 367
Best Efficiency, % 65.9 USS 432
Nominal Housing Diameter (O.D.), in. 5.35
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 179
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 180
ESP Components – Pumps RIMERA OVERSEAS DMCC
Wear resistant
Floater
TECHNICAL DATA
Recommended Operating Range WR, m3/d 160 – 400 Housing pressure limit, atm 408
Recommended Operating Range FL, m3/d 240 – 400 Minimum Casing ID, mm 165
Best Efficiency Point (BEP), m3/d 320 Shaft Diameter, mm 22
Head @BEP, m 10.2 Shaft strength, kW Standard 185
Power @BEP, kW 0.56 HSS 225
Best Efficiency, % 65.9 USS 265
Nominal Housing Diameter (O.D.), mm 136
PUMP CONFIGURATIONS
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 181
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 182
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 183
ESP Components – Pumps RIMERA OVERSEAS DMCC
ESP-R 535-10500
TECHNICAL DATA
Recommended Operating Range WR, bpd 5,283 – 12,680 Housing pressure limit, psi 6,000
Best Efficiency Point (BEP), bpd 10,567 Minimum Casing ID, in 6.50
Head @BEP, ft 42.6 Shaft Diameter, in. 1.18
Power @BEP, hp 4.78 Shaft strength, hp STD 815
Best Efficiency, % 69.5 HSS 881
Nominal Housing Diameter (O.D.), in. 5.35 USS 954
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 184
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 185
ESP Components – Pumps RIMERA OVERSEAS DMCC
TECHNICAL DATA
Recommended Operating Range WR, m3/d 700 – 1,680 Housing pressure limit, atm 408
Best Efficiency Point (BEP), m3/d 1,400 Minimum Casing ID, mm 165
Head @BEP, m 9.0 Shaft Diameter, mm 30
Power @BEP, kW 2.06 Shaft strength, kW Standard 500
Best Efficiency, % 69.5 HSS 540
Nominal Housing Diameter (O.D.), mm 136 USS 585
PUMP CONFIGURATIONS
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 186
ESP Components – Pumps RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 187
ESP Components – Gas handlers RIMERA OVERSEAS DMCC
GAS HANDLERS
Gas Handler (GH) is a device specifically designed for wells with high GOR. It handles up to 35% gas volume fraction (GVF). Gas handler is
normally installed below a central tandem pump. The main part of the GH is an auger that compresses the gas and pumps it as part of gas/liquid
mixture through its body to the pump. The gas handler is normally installed below the main pumping system independently, in series or in
tandem with a standard intake or a gas separator to improve liquid flow stability.
Applications Advantages
1. High GOR wells that require more gas handling systems than a 1. Increases production in gassy wells where a single gas
gas-separator separator can’t handle gas
2. Wells with non-vented packers 2. Stabilizes pump operation by stabilizing liquid flow
3. Gas well dewatering 3. Helps to avoid pump gas locks
4. Prevents the pump from head and flow degradation
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 188
ESP Components – Gas Handlers RIMERA OVERSEAS DMCC
*For order please select required part number and options required for your application.
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 189
ESP Components – Advanced Gas Handlers RIMERA OVERSEAS DMCC
Applications Advantages
1. High GOR wells that require more gas handling systems than a 1. Increases production in gassy wells where a single gas
gas-separator and a gas handler separator can’t handle gas
2. Wells with non-vented packers 2. Stabilizes pump operation by stabilizing liquid flow
3. Gas well dewatering 3. Helps to avoid pump gas locks
4. Wells after gas lift 4. Prevents the pump from head and flow degradation
5. Wells where a GH is not efficient enough
*For order please select required part number and options required for your application.
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 190
ESP Components – Advanced Gas Handlers RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 191
ESP Components – Gas Separators RIMERA OVERSEAS DMCC
GAS SEPARATORS
Rotary Gas Separators (RGS) operate by separating particles of Vortex Gas Separators (VGS) are similar to rotary, they use
different densities using centrifugal forces. As the shaft rotates, centrifugal force and vortex action to separate gas from the fluid
separated gas is vented to the annulus while remaining fluid stream flow in. The vortex gas separators have a vortex chamber in theirs
enters the pump through the inlet ports in the head of the gas construction and improve mixture separation at higher flows. They
separator. are more efficient than rotary gas separators.
*For order please select required part number and options required for your application.
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 192
ESP Components – Gas Separators RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 193
ESP Components – Gas Separator Handlers RIMERA OVERSEAS DMCC
*For order please select required part number and options required for your application.
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 194
ESP Components – Intakes RIMERA OVERSEAS DMCC
INTAKES
Intake can be used when the well produces above the fluid bubble point pressure or if a small amount of the free gas is being produced.
INTAKES NOMENCLATURE
INT -R X
1 2 3
*For order please select required part number and options required for your application.
INTAKES SUMMARY
CS Part SS Part Max Intake OD Length Weight Shaft size
Intake type
Number Number mm in m ft kg lb. mm in
5138000 5145000 INT-R 272 69 2.72 0.27 0.89 6.1 13.4 14 0.55
5139000 5146000 INT-R 319 81 3.19 0.30 0.98 7.7 17.0 14 0.55
5140000 5147000 INT-R 338 86 3.38 0.30 0.98 10.5 23.1 17 0.67
5141000 5148000 INT-R 362 92 3.62 0.30 0.98 12.8 28.2 20 0.79
5142000 5149000 INT-R 406 103 4.06 0.19 0.62 8.0 17.6 25 0.98
5143000 5150000 INT-R 449 114 4.49 0.30 0.98 14.1 31.1 28 1.10
5144000 5151000 INT-R 535 136 5.35 0.33 1.08 32.8 72.3 30 1.18
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 195
ESP Components – Motor Protectors RIMERA OVERSEAS DMCC
MOTOR PROTECTORS
Rimera Overseas DMCC motor protector is a highly reliable protector
(seal) with a modular design available in multiple configurations that
provides enhanced durability, protects motor performance and
enhances production. They give producing companies flexibility to
decide on a configuration to meet their requirements selecting
different combinations of labyrinth and bag chambers in series or
parallel. Other high reliable features include bi-directional high-load
thrust bearings, tungsten carbide radial bearings, elastomer options,
high volume oil chambers and tandem configurations.
*For order please select required part number and options required for your application.
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 196
ESP Components – Motor Protectors RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 197
ESP Components – Motors RIMERA OVERSEAS DMCC
MOTORS
Rimera Overseas DMCC motor is a highly reliable motor designed
for efficient lifting and electrical performance in a variety of
applications. They increase overall ESP reliability and extend run life
reducing workover costs, deferred production and NPT. The robust
Rimera Overseas DMCC motors are available in a variety of
diameters and power ratings and give operators flexibility to select
equipment that specifically meets their requirements. High voltage
motors available from a range of Rimera Overseas DMCC motors
have smaller winding size in their design what improves heat
dissipation and motor cooling. Lower nominal current decreases
voltage drop in a power cable and reduces energy consumption.
Rimera Overseas DMCC PMMs deliver industry-leading efficiency and power factor, reduce energy consumption and electricity costs. PMMs
deliver higher power per rotor than conventional motors what results in a shorter length, eliminates the need of tandem configurations and
gives flexibility selecting an ESP setting depth especially in wells with high dogleg severity (DLS).
MOTOR NOMENCLATURE
X -R X X X X 461 series motors available in 4.56 in. diameter (456 series). Tape-
in MLE available for only 456 series and means that the motors
1 2 3 4 5 6 have bolt pattern for direct connection to most common
protectors of other manufacturers.
*For order please select required part number and options required for your application.
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 198
ESP Components – Induction Motors RIMERA OVERSEAS DMCC
INDUCTION MOTORS
60 Hz 50 Hz Type (№
Length Weight
Part number Power Voltage Power Voltage AMPs Eff, % of
hp V kW V sections) m ft. kg lb.
7101000 25.7 600 16 500 30 79.5 S 3.4 11.0 170 375
7102000 35.4 774 22 645 31.5 79.5 S 4.0 13.2 206 454
7103000 45.1 948 28 790 32.6 79.5 S 4.7 15.5 245 540
7104000 51.5 900 32 750 38 80 S 5.1 16.6 268 591
7105000 57.9 1,200 36 1,000 33 79 S 5.7 18.8 301 664
7106000 64.4 1,380 40 1,150 32.5 79 S 6.4 21.1 335 739
90.2 1,872 56 1,560 33.5 79.5 T(2) 10.6 34.8 563 1,241
7108000 45.1 936 28 780 33.5 UT 5.3 17.4 283 624
7109000 45.1 936 28 780 33.5 LT 5.3 17.4 280 617
101.4 1,800 63 1,500 37 80 T(2) 10.0 32.8 500 1,102
7111000 50.7 900 31.5 750 37 UT 5.0 16.4 250 551
7112000 50.7 900 31.5 750 37 LT 5.0 16.4 250 551
112.6 2,304 70 1,920 34 79.5 T(2) 12.6 41.6 671 1,479
7114000 56.3 1,152 35 960 34 UT 6.3 20.8 337 743
7115000 56.3 1,152 35 960 34 LT 6.3 20.8 334 736
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 199
ESP Components – Induction Motors RIMERA OVERSEAS DMCC
60 Hz 50 Hz Type (№
Length Weight
Part number Power Voltage Power Voltage AMPs Eff, % of
hp V kW V sections) m ft. kg lb.
7116000 25.7 636 16 530 25.6 81 S 3.0 9.9 160 353
7117000 35.4 840 22 700 27.5 81 S 3.7 12.1 200 441
7118000 45.1 1,080 28 900 27 81 S 4.4 14.3 240 529
7119000 51.5 1,200 32 1,000 27.5 81 S 4.7 15.4 260 573
7120000 57.9 1,200 36 1,000 33 81 S 5.4 17.7 300 661
7121000 64.4 1,440 40 1,200 30 81.5 S 5.4 17.7 300 661
7122000 72.4 1,560 45 1,300 31.2 81 S 6.1 19.9 339 747
7123000 80.5 1,680 50 1,400 32 81 S 6.1 19.9 339 747
7124000 90.1 1,920 56 1,600 32 81 S 6.4 21.0 358 789
7125000 101.4 2,100 63 1,750 32 81 S 6.7 22.1 377 831
7126000 112.6 2,280 70 1,900 30.2 82 S 7.1 23.2 398 877
7127000 128.7 2,460 80 2,050 36 80 S 8.1 26.7 405 893
144.8 2,376 90 1,980 40 82 T(2) 11.2 36.7 660 1.456
7129000 72.4 1,188 45 990 40 UT 5.5 18.0 330 728
7130000 72.4 1,188 45 990 40 LT 5.7 18.7 330 728
161.0 2,544 100 2,120 42 81 T(2) 11.8 39.0 680 1,500
7132000 80.5 1,272 50 1,060 42 UT 5.9 19.5 340 750
7133000 80.5 1,272 50 1,060 42 LT 5.9 19.5 340 750
177.0 2,472 110 2,060 49 81.5 T(2) 13.2 43.4 700 1,544
7135000 88.5 1,236 55 1,030 49 UT 6.6 21.7 350 772
7136000 88.5 1,236 55 1,030 49 LT 6.6 21.7 350 772
201.2 3,072 125 2,560 44 81 T(2) 14.0 45.6 730 1,610
7138000 100.6 1,536 62.5 1,280 44 UT 6.9 22.8 380 838
7139000 100.6 1,536 62.5 1,280 44 LT 7.1 22.8 350 772
225.2 3,000 140 2,500 51 81 T(2) 15.2 50.0 795 1,753
7141000 112.6 1,500 70 1,250 51 UT 7.5 25.0 400 882
7142000 112.6 1,500 70 1,250 51 LT 7.7 25.0 395 871
289.8 3,780 180 3,150 52 80.5 T(3) 19.6 64.3 1,060 2.338
7144000 96.6 1,260 60 1,050 52 UT 6.5 21.3 360 794
7145000 96.6 1,260 60 1,050 52 CT 6.4 21.0 350 772
7146000 96.6 1,260 60 1,050 52 LT 6.7 22.0 350 772
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 200
ESP Components – Induction Motors RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 201
ESP Components – Induction Motors RIMERA OVERSEAS DMCC
60 Hz 50 Hz Type (№
Length Weight
Part number Power Voltage Power Voltage AMPs Eff, % of
hp V kW V sections) m ft. kg lb.
7147000 25.7 2,220 16 1,850 8.2 79.5 S 3.3 10.7 208 459
7148000 32.2 2,700 20 2,250 8.5 79.5 S 3.6 11.8 219 483
7149000 35.4 2,820 22 2,350 9 79.5 S 3.6 11.8 219 483
7150000 38.6 3,120 24 2,600 8.5 79.5 S 3.9 12.9 226 498
7151000 45.1 2,520 28 2,100 12.5 79.5 S 4.3 14.1 236 520
7152000 51.5 2,820 32 2,350 12.5 79.5 S 4.6 15.2 255 562
7153000 57.9 3,060 36 2,550 13 79.5 S 5.0 16.3 271 597
7154000 64.4 2,520 40 2,100 17.5 79.5 S 5.3 17.4 299 659
7155000 72.4 2,880 45 2,400 17 79.5 S 6.0 19.6 336 741
7156000 80.5 3,120 50 2,600 17.5 79.5 S 6.3 20.8 352 776
7157000 90.1 3,300 56 2,750 19 79.5 S 6.3 20.8 352 776
7158000 101.4 3,000 63 2,500 24 79.5 S 7.3 24.1 417 919
7159000 112.6 3,096 70 2,580 25.5 79.5 S 8.0 26.3 451 994
7160000 128.7 3,120 80 2,600 28 79.5 S 8.7 28.6 494 1,089
144.8 3,480 90 2,900 28 79.5 T(2) 11.9 39.0 671 1,479
7162000 72.4 1,740 45 1,450 28 UT 5.9 19.3 338 745
7163000 72.4 1,740 45 1,450 28 LT 6.0 19.7 333 734
161.0 3,840 100 3,200 29 79.5 T(2) 12.5 41.0 721 1,589
7165000 80.5 1,920 50 1,600 29 UT 6.2 20.3 363 800
7166000 80.5 1,920 50 1,600 29 LT 6.3 20.7 358 789
177.0 4,080 110 3,400 29.5 79.5 T(2) 13.1 43.0 737 1,625
7168000 88.5 2,040 55 1,700 29.5 UT 6.5 21.3 371 818
7169000 88.5 2,040 55 1,700 29.5 LT 6.6 21.7 366 807
201.2 4,032 125 3,360 34.5 79.5 T(2) 13.8 45.3 737 1,674
7171000 100.6 2,016 62.5 1,680 34.5 UT 6.8 22.3 381 840
7172000 100.6 2,016 62.5 1,680 34.5 LT 7.0 23.0 377 831
225.2 4,380 140 3,650 36 79.5 T(2) 15.2 49.9 779 1,717
7174000 112.6 2,190 70 1,825 36 UT 7.5 24.6 392 864
7175000 112.6 2,190 70 1,825 36 LT 7.7 25.3 387 853
241.4 4,584 150 3,820 36 80 T(2) 15.2 49.9 795 1,753
7177000 120.7 2,292 75 1,910 36 UT 7.5 24.6 400 882
7178000 120.7 2,292 75 1,910 36 LT 7.7 25.3 395 871
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 202
ESP Components – Induction Motors RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 203
ESP Components – Induction Motors RIMERA OVERSEAS DMCC
60 Hz 50 Hz Type (№
Length Weight
Part number Power Voltage Power Voltage AMPs Eff, % of
hp V kW V sections) m ft. kg lb.
7179000 19.3 456 12 380 26 84.5 S 2.1 7.0 132 291
7180000 25.7 900 16 750 18 84.5 S 2.5 8.2 162 357
7181000 32.2 756 20 630 27 84.5 S 2.9 9.4 190 419
7182000 35.4 900 22 750 24 84.5 S 3.3 10.7 228 503
7183000 38.6 960 24 800 25 84.5 S 3.3 10.7 232 511
7184000 45.1 1,080 28 900 26 84.5 S 3.6 11.9 246 542
7185000 51.5 1,200 32 1,000 26 85 S 4.0 13.2 274 604
7186000 57.9 1,440 36 1,200 25 84.5 S 4.4 14.4 302 666
7187000 64.4 1,440 40 1,200 27 84.5 S 4.8 15.6 330 728
7188000 64.4 1,536 40 1,280 26 84.5 S 4.8 15.6 330 728
7189000 72.4 1,680 45 1,400 26 85 S 5.2 16.9 358 789
7190000 80.5 1,680 50 1,400 28 84.5 S 5.5 18.2 389 858
7191000 90.1 1,680 56 1,400 32 84.5 S 5.9 19.4 418 922
7192000 101.4 2,202 63 1,835 28.7 84.5 S 6.3 20.5 442 974
7193000 101.4 2,400 63 2,000 25 84.5 S 6.3 20.5 442 974
7194000 112.6 2,280 70 1,900 30 84.5 S 7.1 23.2 498 1,098
7195000 112.6 2,460 70 2,050 28 84.5 S 7.1 23.2 498 1,098
7196000 128.7 2,220 80 1,850 36.5 84.5 S 7.4 24.4 526 1,160
7197000 144.8 2,280 90 1,900 39 84.5 S 7.8 25.6 554 1,221
7198000 160.9 2,520 100 2,100 40 84.5 S 8.2 26.9 571 1,259
7199000 177.0 2,760 110 2,300 40 84.5 S 8.2 26.9 571 1,259
177.0 2,760 110 2,300 40 84.5 T(2) 9.7 31.7 687 1,515
7201000 88.5 1,380 55 1,150 40 UT 4.9 16.0 345 761
7202000 88.5 1,380 55 1,150 40 LT 4.8 15.7 342 754
7203000 201.2 2,880 125 2,400 44 84.5 S 8.2 26.9 571 1,259
201.2 2,400 125 2,000 51.5 84.5 T(2) 13.0 42.8 909 2,004
7205000 100.6 1,200 62.5 1,000 51.5 UT 6.6 21.4 457 1,008
7206000 100.6 1,200 62.5 1,000 51.5 LT 6.4 21.4 452 996
225.2 3,120 140 2,600 45.5 84.5 T(2) 12.0 39.4 855 1,885
7208000 112.6 1,560 70 1,300 45.5 UT 6.0 19.7 429 946
7209000 112.6 1,560 70 1,300 45.5 LT 6.0 19.7 426 939
257.4 2,760 160 2,300 61 84.5 T(2) 13.6 44.4 967 2,132
7211000 128.7 1,380 80 1,150 61 UT 6.8 22.2 485 1,069
7212000 128.7 1,380 80 1,150 61 LT 6.8 22.2 482 1,063
289.6 2,760 180 2,300 65 84.5 T(2) 14.4 47.0 1,023 2,255
7214000 144.8 1,380 90 1,150 65 UT 7.2 23.5 513 1,131
7215000 144.8 1,380 90 1,150 65 LT 7.2 23.5 510 1,124
321.8 3,000 200 2,500 66.5 84.5 T(2) 15.8 52.0 1,135 2,502
7217000 160.9 1,500 100 1,250 66.5 UT 7.9 26.0 569 1,254
7218000 160.9 1,500 100 1,250 66.5 LT 7.9 26.0 566 1,248
354.0 3,240 220 2,700 68 84.5 T(2) 16.6 54.4 1,191 2,626
7220000 177 1,620 110 1,350 68 UT 8.3 27.2 597 1,316
7221000 177 1,620 110 1,350 68 LT 8.3 27.2 594 1,310
402.4 3,360 250 2,800 75 84.5 T(2) 17.3 56.8 1,186 2,615
7223000 201.2 1,680 125 1,400 75 UT 8.8 28.9 591 1,303
7224000 201.2 1,680 125 1,400 75 LT 8.5 27.9 595 1,312
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 204
ESP Components – Induction Motors RIMERA OVERSEAS DMCC
60 Hz 50 Hz Type (№
Length Weight
Part number Power Voltage Power Voltage AMPs Eff, % of
hp V kW V sections) ft m lb kg
482.7 3,600 300 3,000 85 84.5 T(3) 22.8 74.8 1,637 3,609
7226000 160.9 1,200 100 1,000 85 UT 7.6 24.9 542 1,195
7227000 160.9 1,200 100 1,000 85 CT 7.5 24.6 542 1,195
7228000 160.9 1,200 100 1,000 85 LT 7.7 25.3 553 1,219
579.3 4,428 360 3,690 87 83 T(3) 25.2 82.7 1,789 3,943
7230000 193.1 1,476 120 1,230 87 UT 8.4 27.6 598 1,318
7231000 193.1 1,476 120 1,230 87 CT 8.3 27.2 598 1,318
7232000 193.1 1,476 120 1,230 87 LT 8.5 27.9 593 1,307
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 205
ESP Components – Induction Motors RIMERA OVERSEAS DMCC
60 Hz 50 Hz Type (№
Length Weight
Part number Power Voltage Power Voltage AMPs Eff, % of
hp V kW V sections) m ft. kg lb.
7233000 25.7 2,220 16 1,850 7.2 84.5 S 2.5 8.2 167 368
7234000 32.2 2,760 20 2,300 7.5 84.5 S 2.8 9.1 211 465
7235000 35.4 3,120 22 2,600 7 84.5 S 3.3 10.7 211 465
7236000 38.6 3,240 24 2,700 7.5 84.5 S 3.2 10.3 215 474
7237000 45.1 2,280 28 1,900 12 84.5 S 3.6 11.9 251 553
7238000 51.5 2,652 32 2,210 12 84.5 S 4.0 13.2 284 626
7239000 57.9 2,724 36 2,270 13.5 84.5 S 4.3 14.1 305 672
7240000 64.4 2,460 40 2,050 16.5 84.5 S 4.8 15.6 341 752
7241000 72.4 2,700 45 2,250 16.5 84.5 S 5.2 16.9 368 811
7242000 80.5 3,000 50 2,500 17 84.5 S 5.5 18.1 372 820
7243000 90.1 3,276 56 2,730 17 84.5 S 5.9 19.4 409 902
7244000 101.4 3,240 63 2,700 19.5 84.5 S 6.7 21.9 465 1025
7245000 112.6 3,240 70 2,700 21.5 84.5 S 7.1 23.1 494 1089
7246000 128.7 3,276 80 2,730 25 84.5 S 7.4 24.4 523 1153
7247000 144.8 3,588 90 2,990 25 84.5 S 7.8 25.6 547 1206
7248000 160.9 3,192 100 2,660 31.5 84.5 S 8.2 26.9 576 1270
7249000 177.0 3,324 110 2,770 34 84.5 S 8.2 26.9 576 1270
7250000 201.2 3,900 125 3,250 31.5 84.5 S 8.5 27.8 607 1338
225.2 4,080 140 3,400 34 84.5 T(2) 11.9 39.0 876 1,937
7252000 112.6 2,040 70 1,700 34 UT 6.0 19.7 442 974
7253000 112.6 2,040 70 1,700 34 LT 5.9 19.3 434 957
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 206
ESP Components – Induction Motors RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 207
ESP Components – Induction Motors RIMERA OVERSEAS DMCC
60 Hz 50 Hz Type (№
Length Weight
Part number Power Voltage Power Voltage AMPs Eff, % of
hp V kW V sections) m ft. kg lb.
7254000 35.4 960 22 800 23 85 S 2.0 6.6 162 357
7255000 51.5 1,440 32 1,200 22 85 S 2.5 8.2 191 421
7256000 64.4 1,560 40 1,300 26 85 S 2.5 8.2 191 421
7257000 120.7 1,800 75 1,500 40 85 S 4.0 13.1 378 833
7258000 144.8 1,920 90 1,600 46 85 S 4.5 14.7 369 814
7259000 201.2 2,100 125 1,750 60 85 S 6.5 21.2 621 1,369
7260000 241.4 3,240 150 2,700 45 85 S 7.4 24.4 639 1,409
257.4 2,640 160 2,200 62 85 T(2) 10.6 35.0 866 1,909
7262000 128.7 1,320 80 1,100 62 UT 5.3 17.5 440 970
7263000 128.7 1,320 80 1,100 62 LT 5.3 17.5 426 939
289.6 3,240 180 2,700 62 85 T(2) 11.6 38.4 1,055 2,325
7265000 144.8 1,620 90 1,350 62 UT 5.8 19.2 530 1,168
7266000 144.8 1,620 90 1,350 62 LT 5.8 19.2 525 1,157
321.8 2,640 200 2,200 76 85 T(2) 12.6 41.6 1,145 2,525
7268000 160.9 1,320 100 1,100 76 UT 6.3 20.8 575 1,268
7269000 160.9 1,320 100 1,100 76 LT 6.3 20.8 570 1,257
354 2,880 220 2,400 80 85 T(2) 12.6 41.6 1,145 2,525
7271000 177 1,440 110 1,200 80 UT 6.3 20.8 575 1,268
7272000 177 1,440 110 1,200 80 LT 6.3 20.8 570 1,257
370.2 3,000 230 2,500 73 85 T(2) 10.6 35.0 946 2,085
7274000 185.1 1,500 115 1,250 73 UT 5.3 17.5 480 1,058
7275000 185.1 1,500 115 1,250 73 LT 5.3 17.5 466 1,027
402.4 3,360 250 2,800 72 85 T(2) 11.6 38.2 1,026 2,262
7277000 201.2 1,680 125 1,400 72 UT 5.8 19.1 520 1,146
7278000 201.2 1,680 125 1,400 72 LT 5.8 19.1 506 1,116
482.8 3,600 300 3,000 85.7 85 T(2) 15.6 51.4 1,415 3,119
7280000 241.4 1,800 150 1,500 85.7 UT 7.8 25.7 710 1,565
7281000 241.4 1,800 150 1,500 85.7 LT 7.8 25.7 705 1,554
515 3,360 320 2,800 95 84 T(2) 14.8 48.2 1,310 2,888
7283000 257.5 1,680 160 1,400 95 UT 7.4 24.1 660 1,455
7284000 257.5 1,680 160 1,400 95 LT 7.4 24.1 650 1,433
579.4 3,600 360 3,000 99 85 T(2) 15.6 51.4 1,390 3,064
7286000 289.7 1,800 180 1,500 99 UT 7.8 25.7 700 1,543
7287000 289.7 1,800 180 1,500 99 LT 7.8 25.7 690 1,521
740.1 3,840 460 3,200 115 85 T(3) 21.9 72.0 1,931 4,258
7289000 246.7 1,280 153.3 1,066.7 115 UT 7.3 24.0 663 1,462
7290000 246.7 1,280 153.3 1,066.7 115 CT 7.3 24.0 659 1,453
7291000 246.7 1,280 153.3 1,066.7 115 LT 7.3 24.0 609 1,343
804.6 4,320 500 3,600 120 85 T(3) 23.3 76.7 2,056 4,532
7293000 268.2 1,440 166.7 1,200 120 UT 7.7 25.3 705 1,554
7294000 268.2 1,440 166.7 1,200 120 CT 7.8 25.7 700 1,543
7295000 268.2 1,440 166.7 1,200 120 LT 7.8 25.7 651 1,435
885 5,400 550 4,500 100 84 T(3) 23.3 76.5 1,938 4,273
7297000 295 1,800 183.3 1,500 100 UT 7.7 25.3 668 1,473
7298000 295 1,800 183.3 1,500 100 CT 7.7 25.3 650 1,433
7299000 295 1,800 183.3 1,500 100 LT 7.9 25.9 620 1,367
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 208
ESP Components – Induction Motors RIMERA OVERSEAS DMCC
60 Hz 50 Hz Type (№
Length Weight
Part number Power Voltage Power Voltage AMPs Eff, % of
hp V kW V sections) m ft. kg lb.
7300000 201.2 3,240 125 2,700 37 86 S 5.49 18.01 571 1,259
7442000 386.2 2,280 240 1,900 100 86 S 8.53 27.99 886 1,953
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 209
ESP Components – Permanent Magnet Motors RIMERA OVERSEAS DMCC
PMM is a power generator that can generate an instantaneous high voltage during run in-hole or pump back spin. Installation, commission, run,
operating, troubleshooting and removing of these motors must be performed only by experienced, qualified and trained field personnel in
compliance with all safety procedures. Assembly, testing, maintenance, repair or failure analysis of the PMMs must be performed only by
experienced, qualified and trained service center technicians in compliance with all safety procedures.
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 210
ESP Components – Permanent Magnet Motors RIMERA OVERSEAS DMCC
60 Hz 50 Hz Type (№
Length Weight
Part number Power Voltage Power Voltage AMPs Eff, % of
hp V kW V sections) m ft. kg lb.
7308000 38.6 924 24 770 21.5 90 S 1.9 6.4 134 295
7309000 45.1 1,146 28 955 20 90 S 2.2 7.2 152 335
7310000 51.5 1,236 32 1,030 21 90 S 2.3 7.4 158 348
7311000 64.4 1,584 40 1,320 21 90 S 2.6 8.6 183 403
7312000 72.4 1,764 45 1,470 21 90 S 2.8 9.3 197 434
7313000 80.5 2,076 50 1,730 20 90 S 3.1 10.3 220 485
7314000 90.1 2,292 56 1,910 20 90 S 3.3 11.0 234 516
7315000 101.4 2,556 63 2,130 20 90 S 3.6 11.9 254 560
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 211
ESP Components – Permanent Magnet Motors RIMERA OVERSEAS DMCC
60 Hz 50 Hz Type (№
Length Weight
Part number Power Voltage Power Voltage AMPs Eff, % of
hp V kW V sections) m ft. kg lb.
7316000 112.6 2,814 70 2,345 20.5 90 S 3.9 12.8 274 604
7317000 128.7 3,174 80 2,645 20.5 90 S 4.3 14.0 299 659
7318000 144.8 3,432 90 2,860 21.5 90 S 4.5 14.9 319 703
7319000 160.9 3,666 100 3,055 22 90 S 4.8 15.8 335 739
7320000 177.0 4,014 110 3,345 22.5 90 S 5.1 16.9 357 787
7321000 201.2 3,534 125 2,945 29 90 S 5.6 18.3 393 866
7322000 225.2 3,876 140 3,230 29 90 S 6.1 20.0 429 946
7323000 257.4 3,942 160 3,285 33 90 S 6.7 22.0 471 1,038
7324000 289.6 4,296 180 3,580 35 90 S 7.3 24.0 513 1,131
7325000 321.8 4,080 200 3,400 40 90 S 8.0 26.3 555 1,224
7326000 354.0 4,080 220 3,400 44 90 S 8.0 26.3 555 1,224
7327000 402.4 3,792 250 3,160 54.5 90 S 8.7 28.5 608 1,340
7328000 482.7 3,864 300 3,220 65 90 S 8.8 28.9 619 1,365
Efficiency, %
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 212
ESP Components – MLE and Cable RIMERA OVERSEAS DMCC
Cable construction
1. Conductor
2. Insulation
3. Barrier
4. Tape and braid
5. Armor
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 213
ESP Components – MLE and Cable RIMERA OVERSEAS DMCC
MLE SUMMARY
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 214
ESP Components – MLE and Cable RIMERA OVERSEAS DMCC
MLE DIMENSIONS
Cable cross Dimensions Cable cross Dimensions
Voltage AWG Voltage AWG
section mm in. section mm in.
AWG#7 10 mm2 12.7 X 31.9 0.50 X 1.26 AWG#7 10 mm2 13.5 X 34.3 0.53 X 1.35
AWG#6 13 mm2 13.2 X 33.4 0.52 X 1.31 AWG#6 13 mm2 14.0 X 35.8 0.55 X 1.41
4 kV 5 kV
AWG#5 16 mm 2
13.6 X 34.6 0.54 X 1.36 AWG#5 16 mm 2
14.4 X 37.0 0.57 X 1.46
AWG#4 21 mm2 14.3 X 36.7 0.56 X 1.44 AWG#4 21 mm2 15.1 X 39.1 0.59 X 1.54
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 215
ESP Components – Surface Equipment RIMERA OVERSEAS DMCC
VSD NOMENCLATURE
VSD -R X X X
1 2 3 4 5
# Description
1 Variable Speed Drive
2 Rimera Overseas DMCC design
3 Rated current, A
4 Rated power, kVA
5 Enclosure
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 216
ESP Components – Surface Equipment RIMERA OVERSEAS DMCC
VSD-R 25A VSD-R 32A VSD-R 40A VSD-R 63A VSD-R 80A VSD-R 100A VSD-R 160A
Part number 9098000 9099000 9100000 9101000 9102000 9103000 9104000
Rated current, A 25 32 40 63 80 100 160
Output power
kVA at 480V 21 27 33 52 67 83 133
kVA at 380V 16 21 26 41 53 66 105
Supply voltage 380 to 480 V, -25…10%
Supply voltage frequency 50 ± 2 Hz, 60 ± 2 Hz
Maximum output voltage Same as power supply
Speed control range
Induction motor 1 – 70 Hz, 0.1 Hz resolution
Enclosure rating NEMA 3, 3R, 3S, IP54
Ambient operating temperature -76 … 122°F, -60 … 50°C
Relative humidity up to 100% at 77°F (+25°C)
Electrical protections Fuses on input and output terminals, TVSS
VSD dimensions, 3.69 x 3.04 x 1.16 6.00 x 3.28 x 3.02
(height x width x depth), ft (mm) (1,125 x 927 x 353) (1,830 x 1,000 x 920)
Approximate weight, lbs (kg) 155 (70) 166 (75) 177 (80) 243 (110) 260 (118) 573 (260) 618 (280)
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 217
Auxiliary equipment - Valves RIMERA OVERSEAS DMCC
AUXILIARY EQUIPMENT
VALVES NOMENCLATURE
X -R
1 2
CHECK VALVES
Check valve is designed to:
The check valve is recommended to be installed for applications with permanent magnet motors (PMM). It prevents the pump back spin and
high voltage generation by the PMM on surface power cable ends. The check valve is installed between the pump and a bleeder valve.
BLEEDER VALVES
Bleeder valve is designed to drain formation fluid from the tubing when an ESP is pulled from the well. The valve is installed above the sludge
trap or a check valve.
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 218
Auxiliary equipment – Sludge traps RIMERA OVERSEAS DMCC
SLUDGE TRAP
Sludge trap is a unit developed to protect a pump from solids and sand falling in a tubing after the ESP system shut down. It consists of a body
at the bottom and a small ID tube with holes in the top end (holes located on a ST tube surface, the top end of the tube is blocked). It is
installed inside of the production tubing. When the ESP runs fluid flows from the pump to the surface through the sludge trap tube and the
holes at the top of it and then to the production tubing. After the ESP shuts down all particles and sand fall in annulus between the ST tube and
the production tubing protecting the upper pump section from obstruction and the risk of to be stuck.
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 219
Auxiliary equipment – Motor Shrouds RIMERA OVERSEAS DMCC
MOTOR SHROUDS
Motor shroud is a downhole unit developed to provide excessive cooling to the motor. It reduces annual area between a motor and casing I.D.
and allows to increase fluid velocity.
Applications
The shroud consists of a hanger, pipe or pipes with threaded couplings installed between the pipes, and a tip. The shroud is equipped with a
centralizer installed in a motor base. At the bottom of the shroud, there is a tip with the 2 7/8” thread for attaching load (research instruments)
weighing no more than 551 lb (250 kg). The shroud for a 406 series motor is installed on a special intake. The shroud for 461 or 512 series
motors is installed on a base of a gas separator or on the base of 362, 406 or 449 series pumps using a special hanger. The length of the shroud
is selected depending on the total length of the following units: motor protector, motor, downhole sensor and centralizer. The useful length of
the shroud shall be greater than the total length of the units inside the shroud.
# Description
1 Motor shroud
2 Rimera Overseas DMCC design
3 Motor series
4 Shroud length, ft
*For order please select part number and length required for your application.
*Base configuration, maximum length can be increased by connecting multiple tubes in series.
Maximum MS length
Description
m ft
MS-R 406 20.0 61.0
MS-R 461 42.0 128.0
MS-R 512 35.0 106.7
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 220
Engineering Data RIMERA OVERSEAS DMCC
ENGINEERING DATA
SHAFT STRENGTH
Shaft size
UOM STD HSS USS USS+
mm in.
hp @ 60Hz 73 90 106 114
14 0.55
kW @ 50Hz 45 55 65 70
hp @ 60Hz 130 163 195 212
17 0.67
kW @ 50Hz 80 100 120 130
hp @ 60Hz 203 252 301 326
20 0.79
kW @ 50Hz 125 155 185 200
hp @ 60Hz 301 367 432 465
22 0.87
kW @ 50Hz 185 225 265 285
hp @ 60Hz 440 538 636 685
25 0.98
kW @ 50Hz 270 330 390 420
hp @ 60Hz 555 685 799 865
28 1.10
kW @ 50Hz 340 420 490 530
hp @ 60Hz 815 881 954 1,027
30 1.18
kW @ 50Hz 500 540 585 630
hp @ 60Hz - 1,619 1,914 2,061
35 1.38
kW @ 50Hz - 1,007 1,190 1,282
hp @ 60Hz 1,656 2,021 2,206 2,390
38 1.50
kW @ 50Hz 1,015 1,239 1,352 1,465
MOTOR INFORMATION
Parameter Description
Winding insulation Kapton, Apikal, 390°F (200°C)
Silicon Carbide SiC
Thrust bearing
Silicon Carbide SiC + PEEK evaporation
PPS-A4, 250°F (482°C)
Pothole block materials
PEEK, 300°F (572°C)
Radial bearings Mechanically locked-in rotor spring loaded bearings
ELASTOMERS SUMMARY
Elastomer Description Temperature rating
RS26CH Butadiene Nitrile Rubber 350°F (170°C)
TER-10 Butadiene Nitrile Rubber 430°F (230°C)
HSN Highly Saturated Nitrile 300°F (150°C)
FKM Fluorine rubber 430°F (230°C)
AFL Aflas 480°F (250°C)
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 221
Engineering Data RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 222
Contacts RIMERA OVERSEAS DMCC
CONFIDENTIAL Copyright © 2023, RIMERA OVERSEAS DMCC, All rights reserved 223