3:02 PM
€ mod6é (1).pdf Q &
NPTEL ~ Chemical Engineering ~ Chemical Engineering Design - I
‘And stress due to weight of insulation at height “X”
Woratuin = 7 Ding X Ping %X % Cine 6)
Where, Wins
Das
‘weight of insulation
ean diameter of insulation
height measured from the top of the column
{i= thickness of insulation
Pras = density of insulation
Compressive stress is force per unit area,
(61
Similarly, the stress due to dead weight of the insulation is:
_ x DP. X
Seon = Gat, oo
Da = mean diameter of shell (Dz.= (D, + D))2)
Days Dy. = diameter of insulated vessel
1G thickness of shell without corrosion allowance
Therefore,
69)
Stress induced due to liquid retained in column. Ic will be depend upon internal eg. in
tray columa toal number of plates, hold up over each tay, liquid held up in the down
comer et. will give the total liquid contents ofthe column,
4i_.< ie
7D,t, (6.10)
1D, = mean diameter of vessel, feet
Joint nitatve of IITs and lise — Funded by MHRD Page 70! 29,
Z
NPTEL
Chemical Engineering —
femical Engineering Design - I