Professional Documents
Culture Documents
5 Idemte 2 Eme
5 Idemte 2 Eme
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
Would you like to enter the initial configuration dialog? [yes/no]: Initializing
Hardware ...
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int g0/0/0
Router(config-if)#ip add 172.22.0.1 255.255.255.128
Router(config-if)#no shut
Router(config-if)#
%LINK-5-CHANGED: Interface GigabitEthernet0/0/0, changed state to up
Router(config-if)#int s0/1/0
Router(config-if)#ip add 192.168.1.1 255.255.255.0
Router(config-if)#no shut
Router>
Router>
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#ip route 172.22.0.126 255.255.255.128 s0/1/0
%Default route without gateway, if not a point-to-point interface, may impact
performance
%Inconsistent address and mask
Router(config)#
Router(config)#
Router(config)#
Router(config)#
Router(config)#
Router(config)#
Router(config)#
Router(config)#
Router(config)#no ip route 172.22.0.126 255.255.255.128 s0/1/0
%Inconsistent address and mask
Router(config)#ip route 172.22.0.126 255.255.255.192 s0/1/0
%Default route without gateway, if not a point-to-point interface, may impact
performance
%Inconsistent address and mask
Router(config)#ip route 192.168.1.0 255.255.255.0 s0/1/0
%Default route without gateway, if not a point-to-point interface, may impact
performance
Router(config)#ip route 192.168.2.0 255.255.255.0 s0/1/0
%Default route without gateway, if not a point-to-point interface, may impact
performance
Router(config)#ip route 172.22.0.192 255.255.255.192 s0/1/0
%Default route without gateway, if not a point-to-point interface, may impact
performance
Router(config)#ip route 172.22.1.0 255.255.255.192 s0/1/0
%Default route without gateway, if not a point-to-point interface, may impact
performance
Router(config)#%IP-4-DUPADDR: Duplicate address 172.22.0.1 on
GigabitEthernet0/0/0, sourced by 0001.4283.0A72
Router Kairouan
Would you like to enter the initial configuration dialog? [yes/no]: Initializing
Hardware ...
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
Router(config-if)#
%LINK-5-CHANGED: Interface Serial0/1/0, changed state to up
Router(config-if)#
Router(config-if)#int g0/0/0
Router(config-if)#ip add 172.22.0.129 255.255.255.192
Router(config-if)#no shut
Router(config-if)#
%LINK-5-CHANGED: Interface GigabitEthernet0/0/0, changed state to up
Router(config-if)#int s0/1/1
Router(config-if)#ip add 192.168.2.1 255.255.255.0
Router(config-if)#no shut
Router(config-if)#
Router(config-if)#
Router(config-if)#
Router(config-if)#
Router(config-if)#
Router(config-if)#
Router(config-if)#exit
Router(config)#ip route 172.22.0.0 255.255.255.128 s0/1/0
%Default route without gateway, if not a point-to-point interface, may impact
performance
Router(config)#
Router(config)#
Router(config)#
Router(config)#
Router(config)#
Router(config)#
Router(config)#
Router(config)#ip route 192.168.2.0 255.255.255.0 s0/1/0
%Default route without gateway, if not a point-to-point interface, may impact
performance
Router(config)#ip route 172.22.0.192 255.255.255.192 s0/1/0
%Default route without gateway, if not a point-to-point interface, may impact
performance
Router(config)#ip route 172.22.1.192 255.255.255.192 s0/1/0
%Default route without gateway, if not a point-to-point interface, may impact
performance
Router(config)#ip route 192.168.1.0 255.255.255.0 s0/1/0
%Default route without gateway, if not a point-to-point interface, may impact
performance
Router(config)#
Router Gabes:
Copyright(c) 1986 - 2018 by Cisco Systems, Inc.
Compiled Sun 08 - Jul - 18 04:33 by mcpre
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
Would you like to enter the initial configuration dialog? [yes/no]: Initializing
Hardware ...
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
Router>
Router>
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int g0/0/1
Router(config-if)#ip add 172.22.0.193 255.255.255.192
Router(config-if)#no shut
Router(config-if)#
%LINK-5-CHANGED: Interface GigabitEthernet0/0/1, changed state to up
Router(config-if)#int g0/0/0
Router(config-if)#ip add 172.22.1.1 255.255.255.192
Router(config-if)#no shut
Router(config-if)#
%LINK-5-CHANGED: Interface GigabitEthernet0/0/0, changed state to up
Router(config-if)#int g0/0/0
Router(config-if)#ip add 192.168.2.2 255.255.255.0
Router(config-if)#no shut
Router(config-if)#int g0/0/0
Router(config-if)#ip add 172.22.1.1 255.255.255.192
Router(config-if)#no shut
Router(config-if)#
Router(config-if)#
Router(config-if)#
Router(config-if)#
Router(config-if)#int s0/1/0
Router(config-if)#ip add 192.168.2.2 255.255.255.0
Router(config-if)#no shut
Router(config-if)#
%LINK-5-CHANGED: Interface Serial0/1/0, changed state to up
Router(config-if)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to up
Router(config-if)#
Router(config-if)#
Router(config-if)#exit
Router(config)#ip route 172.22.0.0 255.255.255.128 s0/1/1
%Default route without gateway, if not a point-to-point interface, may impact
performance
Router(config)#ip route 172.22.0.128 255.255.255.192 s0/1/1
%Default route without gateway, if not a point-to-point interface, may impact
performance
Router(config)#
Router(config)#
Router(config)#
Router(config)#
Router(config)#
Router(config)#
Router(config)#ip route 192.168.2.0 255.255.255.0 s0/1/1
%Default route without gateway, if not a point-to-point interface, may impact
performance
Router(config)#