Professional Documents
Culture Documents
Sealbond EPC-100 - TDS & MSDS
Sealbond EPC-100 - TDS & MSDS
SEALBOND EPC-100
EPOXY PRIMER CLEAR (100% SOLIDS)
SEALBOND EPC-100
MIXING Health & Safety
Thoroughly stir each component. Mix two (2) parts by volume of H t wear rubber or plastic gloves to avoid contact with
component A to one (1) part of component B. Mix only enough Please
quantities that can be used within the pot-life of the mixture. skin. Please refer to MSDS for other safety information.
Theoretical Coverage All orders are accepted subject to our current terms of sale and delivery. Users must
always refer to the most recent issue of the Product Data Sheet for the product
As Primer Coat per gallon: awareness,copies of which will be supplied on request and is free of charge.
Low
VOC
A-2 Araneta St. Cor. Gen. Natividad St.
Bgy. Ibayo, Tipas Taguig City, Philippines
3. HAZARDS IDENTIFICATION
POLYAMIDE BASE
SPECIFIC HAZARDS
Irritant (XI)
May cause sensitization by skin contact.
ADVERSE HUMAN HEALTH EFFETCS
ENVIRONMENTAL EFFECTS
PHYSICAL AND CHEMICAL HAZARDS
8. TRANSPORT INFORMATION
LAND TRANSPORT ADR/RID (cross-border)
ADR/RID Class: 9 Miscellaneous dangerous substances and articles.
Hazard Index Number: 90
Substance Index Number: 3082
Packaging Group: III
Label: 9
Designation of goods: 3082 ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID,
N.O.S. (Epoxide derivatives)
MARITIME TRANSPORT IMDG:
IMDG Class: 9
UN Number 3082
Label 9 + MP
Packaging Group: III
EMS Number: F-A,S-F
Marine Pollutants: yes
Correct technical name: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
(Epoxide derivatives)
AIR TRANSPORT ICAO-TI and IATA-DGR:
ICAO/IATA Class: 9
UN/ID Number: 3082
Label 9
Packaging Group: III
Correct technical name: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
(Epoxide derivatives)
9. REGULATORY INFORMATION
Designation according to EC guidelines:
The product has been classified and labeled in accordance with EC Directives/Ordinance on
Hazardous Materials (GefSoffV)
Symbol N:
Recommendation of “Association of Plastics Manufacturer in Europe)
(APEM) – Epoxy Resin Committee
Code letter and hazard designation of product:
Xi Irritant
4
VOC : 15.7g/L
Ecotoxical Effects
Recommendation:
It is the generator’s responsibility to determine if the waste meets applicable definitions of
hazardous waste. Local Regulations may differ from disposal regulations. Dispose of waste
material according to local and provincial environmental regulations.
This information is based on our present knowledge. However, this shall not constitute a
guarantee for any specific product features and shall not establish a legally valid contractual
relationship.