Professional Documents
Culture Documents
Yamaha - A s201 1
Yamaha - A s201 1
A-S201
IMPORTANT NOTICE
This manual has been provided for the use of authorized Yamaha Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifically Yamaha Products, are already known
and understood by the users, and have therefore not been restated.
WARNING: Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury,
destruction of expensive components, and failure of the product to perform as specified. For these reasons, we advise
all Yamaha product owners that any service required should be performed by an authorized Yamaha Retailer or the
appointed service representative.
IMPORTANT: The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or
recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and service
departments of Yamaha are continually striving to improve Yamaha products. Modifications are, therefore, inevitable and specifications
are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the distributor's
Service Division.
WARNING: Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).
IMPORTANT: Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.
■ CONTENTS
TO SERVICE PERSONNEL ............................................2 DISPLAY DATA .............................................................28
FRONT PANEL ...............................................................3 IC DATA ...................................................................29–31
REAR PANELS ...........................................................3–5 BLOCK DIAGRAM ........................................................32
REMOTE CONTROL PANEL ..........................................6 WIRING DIAGRAM .......................................................33
SPECIFICATIONS .......................................................6–7 PRINTED CIRCUIT BOARDS .................................34–39
INTERNAL VIEW ............................................................8 PIN CONNECTION DIAGRAMS ...................................40
SERVICE PRECAUTIONS ..............................................8 SCHEMATIC DIAGRAM ................................................41
DISASSEMBLY PROCEDURES ............................... 9–11 REPLACEMENT PARTS LIST ................................43–49
UPDATING FIRMWARE .......................................... 12–17 REMOTE CONTROL .....................................................50
SELF-DIAGNOSTIC FUNCTION ............................ 18–27 ADVANCED SETUP ......................................................51
For U model
“CAUTION”
“F1: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH SAME TYPE 8A, 125V
FUSE.”
A-S201
For C model
CAUTION
F1: REPLACE WITH SAME TYPE 8A, 125V FUSE.
ATTENTION
F1: UTILISER UN FUSIBLE DE RECHANGE DE MÉME TYPE DE 8A, 125V.
Caution:
As the melting point temperature of the lead free solder is about 30°C to 40°C (50°F to 70°F) higher than that of the lead
solder, be sure to use a soldering iron suitable to each solder.
2
A-S201
■ FRONT PANEL
A-S201
■ REAR PANELS
R model
T model
3
A-S201
K model
A-S201
A model
B, G models
4
A-S201
L model
A-S201
5
A-S201
PHONO (MM)
Input shorted 10 mV ............................................... 75 dB or more
Bass
Boost/Cut (50 Hz) ............................................................... ±10 dB
Turnover frequency ............................................................. 170 Hz
Treble
Boost/Cut (20 kHz) ............................................................. ±10 dB
Turnover frequency ............................................................ 3.0 kHz
6
A-S201
■ General
(7/8")
(1-3/4")
T model ................................................................... AC 220 V, 50 Hz
22.5
K model .................................................................. AC 220 V, 60 Hz Top view
45
ø 60
A model .................................................................. AC 240 V, 50 Hz
B, G models ............................................................ AC 230 V, 50 Hz
L model ...................................................... AC 220–240 V, 50/60 Hz
333 (13-1/8")
290 (11-3/8")
190 (7-1/2")
Power Consumption
R, K, A, B, G models ............................................................... 175 W
T, L models ............................................................................. 140 W
A-S201
55
(2-1/8")
Dimensions (W x H x D) 50 335 (13-1/4")
20.5
(3/4")
............................... 435 x 141 x 333 mm (17-1/8" x 5-1/2" x 13-1/8") (2")
Weight
................................................................................ 6.7 kg (14.8 lbs.) Front view
120 (4-3/4")
141 (5-1/2")
Finish
R, T, K, A, B, G, L models ............................................... Black color
R, T, K, A, B, G, L models ................................................Silver color
Accessories
21
(7/8")
435 (17-1/8")
Remote control ..............................................................................x 1
Battery (LR6, AA, UM-3) ...............................................................x 2
Unit: mm (inch)
7
A-S201
■ INTERNAL VIEW
1 2 1 MAIN (5) P.C.B. (R model)
Top view
2 MAIN (1) P.C.B.
3 MAIN (8) P.C.B.
4 MAIN (7) P.C.B.
5 POWER TRANSFORMER
6 MAIN (6) P.C.B.
7 MAIN (3) P.C.B.
8 MAIN (2) P.C.B.
9 MAIN (4) P.C.B.
A-S201
5 4 3
Front view
6 7 8 9
■ SERVICE PRECAUTIONS
Safety measures
• Some internal parts in this product contain high voltages and are dangerous.
Be sure to take safety measures during servicing, such as wearing insulating gloves.
• Note that the capacitors indicated below are dangerous even after the power is turned off because an electric charge
remains and a high voltage continues to exist there.
Before starting any repair work, connect a discharging resistor (5 k-ohms/10 W) to the terminals of each capacitor
indicated below to discharge electricity.
The time required for discharging is about 30 seconds per each.
C140, C143, C149 and C150 on MAIN (1) P.C.B.
For details, refer to “PRINTED CIRCUIT BOARDS”.
8
A-S201
■ DISASSEMBLY PROCEDURES
(Remove parts in the order as numbered.)
Disconnect the power cable from the AC outlet.
A-S201
②
Top cover
④
③
CB102 Hook
CB502
②
⑤
Fig. 1
9
A-S201
⑧ ⑨ CB4
CB7
CB103
⑧
A-S201
AMP unit
Fig. 2
⑦
Rear view
Fig. 3
10
A-S201
A-S201
Rear panel
Ground lead
Chassis
Ground lead
Heatsink
Fig. 4
11
A-S201
■ UPDATING FIRMWARE
When the following parts are replaced, the firmware must be updated to the latest version.
MAIN P.C.B.
Microprocessor: IC203 on FUNCTION (1) P.C.B.
Start up the self-diagnostic function and select “3. FACTORY PRESET” menu.
(For details, refer to “SELF-DIAGNOSTIC FUNCTION”)
Select “PRST RSRV”, press the “ ” (Power) key to turn off the power once and turn on the power again. Then the back-
up IC is initialized.
12
A-S201
● Connection
* Disconnect the power cable of this unit from the AC outlet.
• Connect the writing port (CB201 on MAIN (1) P.C.B.) located on the rear panel of this unit to the USB port of the PC
with USB to serial converter, RS-232C conversion adaptor and flexible flat cable as shown below. (Fig. 1)
This unit
PC Writing port
(CB201 on MAIN (1) P.C.B.)
USB port
A-S201
Flexible flat cable (9P)
RS-232C conversion adaptor
USB cable
Fig. 1
● Operation procedure
1. Connect the power cable of this unit to the AC outlet.
The power to this unit is supplied and the microprocessor is in the writing mode.
2. Start up RFP.exe.
The screen appears as shown below. (Fig. 2)
3. Select the Basic mode and click [Next]. (Fig. 2)
Fig. 2
13
A-S201
4. Select the type of the microprocessor and make the workspace. (Fig. 3)
• Microcontroller: RL78
• Using Target Microcontroller: RL78/G13, R5F100JE
• Workspace Name: Any name
• Project Name: Any name
• Folder: Any place
* Click [Browse…] and specify the place where the workspace is made. (Fig.3)
5. Click [Next]. (Fig. 3)
RL78
A-S201
RL78/G13, R5F100JE
Workspace Name
Project Name
Folder
Fig. 3
14
A-S201
Tool: COMx
A-S201
Fig. 4
115200
Fig. 5
15
A-S201
Fig. 6
16
A-S201
11. When writing of the firmware is completed, the screen appears as shown below. (Fig. 7)
12. Click [X] to end RFP.exe. (Fig. 7)
A-S201
Fig. 7
13. Disconnect the power cable of this unit from the AC outlet.
14. Remove the RS-232C conversion adaptor and flexible flat cable from the writing port (CB201 on MAIN (1) P.C.B.) of
this unit.
15. Connect the power cable of this unit to the AC outlet, start up the self-diagnostic function and check that the
firmware version and checksum are the same as written ones. (For details, refer to “Confirmation of firmware
version and checksum”)
17
A-S201
■ SELF-DIAGNOSTIC FUNCTION
This unit has self-diagnostic functions that are intended for inspection, measurement and location of faulty point.
There are 6 main menu items, each of which has sub-menu items.
Listed in the table below are main menu items and sub-menu items.
Note: Some of the menu items listed below may not apply to the models covered in this service manual.
18
A-S201
“ ” (Power) indicator
“ ” (Power) key
A-S201
While pressing these keys, turn on the power.
CAUTION!
Using this unit with the protection function disabled may cause further damage to this unit. Use special care for this point
when using this mode.
19
A-S201
The information of protection function which worked at that time is displayed. Then “1. VERSION/SUM” is displayed in
a few seconds.
Note: At that time if you restart the self-diagnostic function after turning off the power once, “NO PROTECT” will be
displayed. That is because that situation is equal to “1. When the power is turned off by usual operation:”.
However history of the protection function is stored in memory as backup data. For details, refer to “5.
PROTECTION HISTORY” menu.
I PRT
Notes:
• Applying the power to this unit without correcting the abnormality can be dangerous and cause additional
circuit damage. To avoid this, if protection function due to excess current works 1 time, the power will not turn
on even when the “ ” (Power) key is pressed. In order to turn on the power again, disconnect the power cable
of this unit from the AC outlet once and then reconnect it again.
• The output transistors in each amplifier channel should be checked for damage before applying power to this unit.
• Amplifier current should be monitored by measuring DC voltage across the emitter resistors for each channel.
20
A-S201
A-S201
2-3. When the protection function worked due to abnormal voltage in the power supply section.
Notes:
• Applying the power to this unit without correcting the abnormality can be dangerous and cause additional
circuit damage. To avoid this, if “PS” and “DC” protection function works 3 times consecutively, the power
will not turn on even when the “ ” (Power) key is pressed. In order to turn on the power again, disconnect the
power cable of this unit from the AC outlet once and then reconnect it again.
• The output transistors in each amplifier channel should be checked for damage before applying power to this unit.
• Amplifier current should be monitored by measuring DC voltage across the emitter resistors for each channel.
2-4. When the protection function worked due to excessive heatsink temperature.
21
A-S201
Sub-menu selection
Select the sub-menu using “TREBLE +” (forward) and “TREBLE –” (reverse) keys.
• Master volume: 60
• Input: CD
• SPEAKER: SPEAKERS A on
22
A-S201
A-S201
A2-G(054) 1-3. MODEL/DESTINATION
The model name and destination are displayed.
Not for service.
Destination: R, T, K, A, G (B, G), L
Model
Model name A2 (A-S201)
23
A-S201
2. DISPLAY CHECK
This menu is used to check operation of the FL display.
Using the sub-menu, the display varies as shown below.
FL display
Segment conditions of the FL driver and the FL tube are checked by turning ON and OFF all segments.
24
A-S201
3. FACTORY PRESET
This menu is used to reserve/inhibit initialization of the back-up IC.
CAUTION: Before setting to the PRESET RESERVED, write down the existing preset memory content of the tuner. (This
A-S201
is because setting to the PRESET RESERVED will cause the user memory content to be erased.)
4. AD DATA CHECK
This menu is used to display the A/D conversion value of the microprocessor which detects panel keys and protection
functions by using the sub-menu.
When “4-5. KEY” sub-menu is selected, keys become inoperable due to detection of the values of all keys. However, it
is possible to advance to the next menu by pressing the “ ” (forward) key or “ ” (reverse) key on the remote control.
* Numeric values in the figure are given as reference only.
4-1. PS
Power supply voltage (PS) protection detection.
The voltage at 44 pin (PRPS) of IC203 is displayed.
Normal value: 113 to 175
(Reference voltage: 3.3 V = 255)
* If PS becomes out of the normal value range, the protection function works to turn off the power.
PS 145
4-2. DC
Power amplifier DC (DC voltage) output is detected.
The voltage at 42 pin (PRD) of IC203 is displayed.
Normal value: 27 to 136
(Reference voltage: 3.3 V = 255)
* If DC becomes out of the normal value range, the protection function works to turn off the power.
DC 089
25
A-S201
4-3. TA
Temperature of the heatsink (TA) is detected.
The voltage at 43 pin (THM) of IC203 is displayed.
Normal value: 15 to 134 (R, K, A, B, G models)
15 to 130 (T, L models)
(Reference voltage: 3.3 V = 255)
* If TA becomes out of the normal value range, the protection function works to turn off the power.
TA 069
4-4. DESTINATION
Destination of this unit is detected.
The voltage at 45 pin (DEST) of IC203 is displayed.
A-S201
DEST 054
Destination
Destination R T K A G (B, G) L
A/D value
162 – 178 092 – 102 103 – 114 031 – 047 048 – 059 115 – 123
(3.3 V = 255)
4-5. KEY
Panel key is detected.
KEY0: The voltage at 40 pin (KEY0) of IC203 is displayed.
KEY1: The voltage at 41 pin (KEY1) of IC203 is displayed.
When the A/D conversion value of the panel key becomes out of the specified range, normal operation will not
be available.
In that case, check the constant of voltage dividing resistor, solder condition, etc. Refer to table.
* When “4-5. KEY” menu is selected, keys become inoperable due to detection of the values of all keys.
However, it is possible to advance to the next menu by pressing the “ ” (forward) key or “ ” (reverse) key on
the remote control.
(Reference voltage: 3.3 V = 255)
K-255,255
KEY1
KEY0
26
A-S201
5. PROTECTION HISTORY
This menu is used to display the history of protection function.
When the “SPEAKERS B” key is pressed, the protection history being displayed will be cleared.
* Numeric values in the figure are given as reference only.
xxx: A/D conversion value of voltage at the moment when the protection function worked
(Reference voltage: 3.3 V = 255)
A-S201
3 TA xxxH 5-3. HISTORY 3
27
A-S201
■ DISPLAY DATA
● V501 : HNV-10SS61 (MAIN P.C.B.)
32 1
PATTERN AREA
● PIN CONNECTION
Pin No. 32 31 30 29 28 27 26 25 24 23 22 21
Connection F2 F2 NP 1G 2G 3G 4G 5G 6G 7G 8G 9G
Pin No. 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
A-S201
● GRID ASSIGNMENT
1G
s1 s2
a
h j k
f b
g m
2G 3G 4G 5G 6G 7G 8G 9G 10G e c
r p n
d
(2G–10G)
● ANODE CONNECTION
1G 2G – 10G 1G 2G – 10G
P1 s2 P9 g
P2 s1 P10 m
P3 a P11 c
P4 b P12 e
P5 f P13 r
P6 h P14 p
P7 j P15 n
P8 k P16 d
28
A-S201
■ IC DATA
IC203: R5F100JEAFA (MAIN (1) P.C.B.)
Microprocessor
* No replacement part available.
A-S201
PORT 13
P137
LOW-SPEED
12-BIT INTERVAL
ON-CHIP P140,
TIMER
OSCILLATOR PORT 14 3 P146, P147
REAL-TIME
RTC1HZ/P30 CLOCK ANI0/P20 to
8
AN17/P27
CODE FLASH MEMORY
RL78 ANI16/P03, ANI17/P02,
Microprocessor A/D CONVERTER 4 ANI16/P147, ANI19/P120
SERIAL ARRAY
UNIT0 (4ch) CORE DATA FLASH MEMORY AVREFE/P20
RxD0/P11(RxD0/P16) AVREFE/P21
UART0
TxD0/P12(TxD0/P17)
RxD1/P03 KR0/P70 to
UART1 KEY RETURN 8
TxD1/P02 KR7/P77
SCK00/P10
SI00/P11 CSI00
SO00/P12 POWER ON RESET/
POR/LVD
VOLTAGE
SCK01/P75 RAM CONTROL
DETECTOR
SI01/P74 CSI01
SO01/P73
SCK11/P30
RESET CONTROL
SI11/P50 CSI11
SO11/P51
SCL01/P75
IIC01 SYSTEM RESET
SDA01/P74 CONTROL X1/P121
SCL11/P30 X2/EXCLK/P122
IIC11 HIGH-SPEED
SDA11/P50 ON-CHIP XT1/P123
SDAA0/P61(SDAA0/P13) OSCILLATOR
SERIAL XT2/EXCLKS/P124
INTERFACE IICA0
SCLA0/P60(SCLA0/P14)
SERIAL ARRAY VOLTAGE
REGC
UNIT1 (2ch) REGULATOR
BUZZER OUTPUT
RxD2/P14(RxD2/P76) PCLBUZ0/P140
UART2 2 (PCLBUZ0/P31), RxD2/P14(RxD2/P76)
TxD2/P13(TxD2/P77) CLOCK OUTPUT PCLBUZ1/P15 INTP0/P137
LINSEL
CONTROL INTP1/P50
2 INTP2/P51
SCK20/P15
SI20/P14 CSI20 MULTIPLIER and INTP3/P30,
CRC 2
SO20/P13 DIVIDER INTERRUPT INTP4/P31
MULITIPLY- CONTROL
SCK21/P70 ACCUMULATOR INTP5/P16
SI21/P71 CSI21
SO21/P72 INTP0/P140
DIRECT MEMORY
SCL20/P15 ACCESS CONTROL 4 INTP6/P74 to
IIC20 INTP11/P77
SDA20/P14
SCL21/P70 BCD
IIC21
SDA21/P71 ADJUSTMENT
REC_N_MUTE
PRE_N_MUTE
PDRT_LED
PWR_DET
3.3S_PON
TOOLRxD
TOOLTxD
M_PLED
VOL_RB
VOL_RA
MODEL
MPSW
PRY
39
38
37
36
35
34
33
32
31
30
29
28
27
KEY0 40 26 FL_SCK
KEY1 41 25 FL_MISO
PRD 42 24 FL_MOSI
THM 43 23 FL_STB
PRPS 44 22 EVOL_SDA
DEST 45 IC203 21 EVOL_SCL
VREFM 46 20
VREFP 47 R5F100JEAFA 19 GPIO2
SPBRY 48 18 PRI
DBG_Rx 49 17
DBG_Tx 50 16 TU_N_RST
DBG_LED 51 15 TU_SDA
SPARY 52 14 TU_SCL
10
11
12
13
1
2
3
4
5
6
7
8
9
HPRY
N_HP_DET
TOOL0
N_RST
REM
X2
X1
REGC
VSS
VDD
29
A-S201
I/O
Pin Function
Port Name Related Power Supply Detail of Function
No. Name
OFF ON
1 P140/PCLBUZ0/INTP6 HPRY O O HP relay (HIGH = ON)
2 P120/ANI19 (Vacant) Detection of HP insertion (LOW = inserted) (HP_N_DET spare)
3 P41/TI07/TO07 (Vacant)
4 P40/TOOL0 TOOL0 I I For E1 debugging
5 RESET N_RST I I For debugging
6 P124/XT2/EXCLKS (Vacant) I I
7 P123/XT1 (Vacant) I I
8 P137/INTP0 REM I IRQ IR light receiving unit
9 P122/X2/EXCLK (Vacant) I I Ceramic lock (X2 spare)
10 P121/X1 (Vacant) I I Ceramic lock (X1 spare)
11 REGC REGC I I Regulator (Connected to VSS via capacitor)
12 VSS VSS I I GND
A-S201
30
A-S201
31
A B C D E F G H I J
A-S201
1 ■ BLOCK DIAGRAM
IC201
Volume
PHONO PHONO EQ. SP A
Input Selector
Tone Control
2 NJM2068MD A
MUTE RY102
POWER
AMPLIFIER SP B SPEAKERS
CD
B
RY103
HP
MUTE PHONES
(REC) RY101
LINE IC202
E-VOLUME Relay Driver
3
BD3491FS
Relay Driver
POWER SUPPLY
Power transformer POWER
4
Volume IC203
(ROTARY ENCODER) Microprocessor POWER SUPPLY AC IN
R5F100JEAFA
110-120
Operation Key Internal CLK:32MHz 220-240V/
50/60 Hz
(TACT SW.)
5 POWER SUPPLY
IC501
FL Driver
HT16515-44LQFP
Sub-transformer
POWER SUPPLY
• See page 41 →
MAIN
SCHEMATIC DIAGRAM
FL Display PDT/RST
32
A B C D E F G H I J
A-S201
• OVERALL ASSEMBLY
MAIN (8)
3
CB7
CB4 CB4
CB7
MAIN (1)
W102 CB204
CB101
Avoid all wire from
touching heatsink
MAIN (7)
4 CB103
W101
POWER POWER
TRANSFORMER TRANSFORMER
MAIN (8)
5 CB502 CB502
View A
33
A B C D E F G H I J
A-S201
CB201
CB4
CB7
CB6 CB5
CB202
Power
3 transformer
-VP
VPE
MG
3.3S 3.3M
MG
MPDRT_LED
FL_MISO
CB204
FL_STB
FL_MOSI
FL_SCK
4 REM R model
M_PLED
MPSW
W102
KEY0 KEY1
MVOL_RA
MVOL_RB
T, K, A, B, G, L models
CB101
MAIN (2)
(CB501)
HPR
E
E
HPL
MAIN (6)
(CB102)
R model
5
CB103
THM
3.3S
MG
MAIN (7)
(W101)
6
34
A B C D E F G H I J
A-S201
2
K, A, B, G, L models R model T, K, A, B, G, L models
3
16 1
IC202
17 32
14 13
26 1
4 27 IC203
52
39 40
R model
5 4
IC1
1 3
• Semiconductor Location
Ref no. Location Ref no. Location Ref no. Location Ref no. Location Ref no. Location Ref no. Location Ref no. Location Ref no. Location Ref no. Location
D1 H5 D103 G5 D115 E4 D204 C4 Q3 I5 Q107 G5 Q124 D4 Q132 G4 Q208 C5
D2 I4 D104 D5 D116 G4 D207 B4 Q5 I4 Q108 E5 Q125 H4 Q133 H4 Q209 C5
D3 I4 D105 G5 D117 G3 IC1 I5 Q6 H4 Q117 G6 Q126 E4 Q201 E3
D4 I4 D106 E5 D119 E4 IC201 C3 Q7 H4 Q118 E5 Q127 G4 Q202 E3
D5 I4 D108 D4 D120 E4 IC202 D3 Q8 H4 Q119 D6 Q128 H4 Q203 E4
D6 H4 D109 G4 D201 D5 IC203 C4 Q101 G5 Q120 E4 Q129 E4 Q204 D4
7
D9 H4 D110 H3 D202 D5 Q1 I4 Q102 D5 Q122 G4 Q130 G4 Q205 B3
D10 H4 D114 F3 D203 C4 Q2 I4 Q103 G5 Q123 G4 Q131 E4 Q206 B3
35
A B C D E F G H I J
A-S201
MVOL_RB
CB502
MVOL_RA
2 KEY1 KEY0
MPSW
M_PLED
REM
FL_SCK
CB501
FL_MOSI POWER TRANSFORMER
FL_STB
FL_MISO Remote control
MPDRT_LED
MG sensor
3.3S
3.3M MG
W502A
MG PURE DIRECT
VPE STANDBY/ON SW_SPAB
-VP indicator MP_SW
indicator
3.3M
MAIN (1)
(CB204)
4 + – + –
INPUT TREBLE BASS
SW_PDRT
VOL_RA
VOL_RB
+3.3S
MG
FG
W502B
W503B
6
VOLUME
B A PURE DIRECT
SPEAKERS (Power)
36
A B C D E F G H I J
A-S201
2 23 22
33 IC501 12
34 11
44 1
• Semiconductor Location
Ref no. Location
D501 F2
D502 F2
IC501 E2
4 Q502 E2
Q503 G3
Q504 C2
37
A B C D E F G H I J
A-S201
VOLTAGE SELECTOR
CB102
2 HPE
HPE
HPL
YE
MAIN (1)
(W102)
PU
CB3
JK101
OR
CB1 CB2
3 RE
POWER TRANSFORMER
PHONES
5 VCC
IC101
OUT
GND
W110
• Semiconductor Location
Ref no. Location
THM
3.3S
MG
IC101 D5
MAIN (1)
6 (CB101)
38
A B C D E F G H I J
A-S201
39
A-S201
32 16 3
8 4 5
+VS 1 4
44 12 VOUT
1 GND 52 14
1 11 13
1
• Diodes
• Transistors
C 3
C C D
C
E 1 1: GND
E E S
E 2: IN
B B B G 2
B 3: OUT
BC
E
40
A B C D E F G H I J K L M N
A-S201
SCHEMATIC DIAGRAM Safety measures
• Some internal parts in this product contain high voltages and are dangerous. Be sure to take safety measures during servicing, such as wearing insulating gloves.
MAIN • Note that the capacitors indicated below are dangerous even after the power is turned off because an electric charge remains and a high voltage continues to exist there.
Before starting any repair work, connect a discharging resistor (5 k-ohms/10 W) to the terminals of each capacitor indicated below to discharge electricity. Destination Part List
1
+--------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+
| sXX | LOC | R | T | K | A | BG | L |
The time required for discharging is about 30 seconds per each. +--------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+
| s1 | F1 | WQ21110 | VV07180 | VV07180 | VV07180 | VV07180 | VV07180 |
| | | 8A125V | 4A250V | 4A250V | 4A250V | 4A250V | 4A250V |
C140, C143, C149, C150 on MAIN (1) P.C.B. +--------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+
| s2 | J4 | X | VN50000 | VN50000 | VN50000 | VN50000 | VN50000 |
| | | | JIS C 3101 | JIS C 3101 | JIS C 3101 | JIS C 3101 | JIS C 3101 |
CB204
to OPER(1)
52045
+--------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+
| s3 | T1 | YF765A0 | YF766A0 | YF766A0 | YF766A0 | YF766A0 | YF766A0 |
| | | YF765 | YF766 | YF766 | YF766 | YF766 | YF766 |
MPDRT_LED
+--------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+
VPE
-VP
MVOL_RB
MVOL_RA
KEY1
KEY0
MPSW
REM
FL_SCK
FL_MOSI
FL_STB
FL_MISO
3.3S
3.3M
M_PLED
MG
MG
| s4 | R15 | RD35715 | X | X | X | X | X |
| | | 15K | | | | | |
+--------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+
| s5 | R13 | RD35633 | X | X | X | X | X |
3.2
0
3.3
3.3
0
3.3
3.3
3.3
3.3
3.3
0.3
0
3.3
3.3
0
-23.5
0
MAIN Transformer | | | 3.3K | | | | | |
RESISTOR
(Except RL Destination) +--------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+
0V REMARKS PARTS NAME | s6 | Q7,Q6 | WC39760 | X | X | X | X | X |
MPDRT_LED
1
MFL_MOSI
MFL_MISO
| | | 2N5401S-RTK/P | | | | | |
MVOL_RB
MVOL_RA
MFL_SCK
MFL_STB
Pri NO MARK CARBON FILM RESISTOR (P=5)
M_PLED
2
(Except RL Dest.) +--------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+
MKEY1
MKEY0
CARBON FILM RESISTOR (P=10)
MPSW
REM
| s7 | Q8 | WC39830 | X | X | X | X | X |
S1
METAL OXIDE FILM RESISTOR | | | 2N5551S-RTK/P | | | | | |
METAL FILM RESISTOR +--------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+
| s8 | Q5 | ZG24570 | X | X | X | X | X |
METAL PLATE RESISTOR | | |KTA1661-Y-RTF/P| | | | | |
FIRE PROOF CARBON FILM RESISTOR +--------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+
s201 HOT
R280 R T K A BG L CEMENT MOLDED RESISTOR | s10 | R14 | WW97570 | X | X | X | X | X |
R-S201 20K 6.2K 7.5K 1.8K 2.7K 9.1K S2 | | | 47K | | | | | |
SEMI VARIABLE RESISTOR +--------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+
s202 MODEL CHIP RESISTOR | s11 | J2 | X | VN50000 | VN50000 | VN50000 | VN50000 | VN50000 |
R-S201 R304 10k | | | | JIS C 3101 | JIS C 3101 | JIS C 3101 | JIS C 3101 | JIS C 3101 |
A-S201 R279 10k S3 +--------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+
| s12 | D6 | WY16410 | X | X | X | X | X |
MAIN (7) S4
CAPACITOR
REMARKS PARTS NAME
|
|
s13
|
|
|
R11
|
|
|
UDZV12B
WW97570
47K
|
|
|
X
|
|
|
X
|
|
|
X
|
|
|
X
|
|
|
X
|
+--------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+
| |
|
Power NO MARK ELECTROLYTIC CAPACITOR +--------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+
| s14 | R7 | RD35710 | X | X | X | X | X |
R279
TANTALUM CAPACITOR
10K
| | | 10K | | | | | |
transformer
2 THM NO MARK CERAMIC CAPACITOR +--------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+
CB205
| s15 | C10 | UR86710 | X | X | X | X | X |
PHI
CERAMIC TUBULAR CAPACITOR
| | | 10/50 | | | | | |
W101
(For factory) to POWER TRANSFORMER to POWER cable POLYESTER FILM CAPACITOR
100P(SL)
IC101
CB101 +--------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+
THM THM THM
POLYSTYRENE FILM CAPACITOR | s16 | D8 | WU20160 | X | X | X | X | X |
C274
LM61CIZ
no_use
R304
OUT VCC 3.3S 3.3S
PRIMARY MICA CAPACITOR | | | 1N4003S | | | | | |
VHIS
VHIS
+--------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+
CB4
CB7
MG MG
0.1/16
3.3_PON
M_PLED
TOOLRxD
TOOLTxD
PRE_N_MUTE
REC_N_MUTE
MPDRT_LED
MVOL_RB
MVOL_RA
PWR_DET
MPSW
M_PRY
+--------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+
100V 200V | s18 | C14 | UR86610 | X | X | X | X | X |
R260
| | | 1/50 | | | | | |
47K
ST101
C283 +--------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+
R-S700 T8A125 WQ21110 T4AL250 VV07180 | s20 | SW1 | WV38290 | X | X | X | X | X |
C 2 8 41 0 0 0 P ( B )
R-S500 T8A125 WQ21110 T4AL250 VV07180 NOTICE (model) | | | SL14 | | | | | |
+--------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+
R176
J JAPAN
R300
R295
R293
R291
1000P(B) R-S300 T5A125 WB22110 T2.5AL250 VV07160
100
no_use
100
100
1K
A-S500 T8A125 WQ21110 T4AL250 VV07180 | s21 | CB1 | WN10300 | X | X | X | X | X |
U U.S.A
A-S300 T6A125 WB22120 T2.5AL250 VV07160 | | CB2 | TP00351-31 | | | | | |
0
R224
R263
470K
R258
C CANADA
R301
R296
R294
R285
10K
A-S201 T8A125 WQ21110 T4AL250 VV07180 +--------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+
no_use
3.3
3.3
R312
10K
100
P W R _ D E T 3.4 1 0 0
100
no_use
R278
10K
| s22 | F2 | VV07180 | X | X | X | X | X |
3.3
3.3
R-S201 T8A125 WQ21110 T4AL250 VV07180 R GENERAL
JIS C 3101
JIS C 3101
C6
PRE_N_MUTE
REC_N_MUTE
| | | 4A250V | | | | | |
3.3
R265
0.1/16
T CHINA
3.3S_PON
PDRT_LED
10K
0
+--------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+
0
0.01/250
J1
J3
3.3
0
R309
VOL_RB
VOL_RA
0
C280 K KOREA | s23 | CB3 | V937790 | X | X | X | X | X |
10K
MODEL
RY1 F1
MPSW
| | | B4P7S-VH | | | | | |
PRY
A AUSTRALIA
DLS5D1-O(M)0.25 CB5 s1 CB6 +--------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+
39 38 37 36 35 34 33 32 31 30 29 28 27 FL_SCK TP00351-31
B BRITISH | s24 | R16 | RD35810 | X | X | X | X | X |
MKEY0 R305 KEY0 R 2 9 0 3.3 MFL_SCK
100
40 26 G EUROPE | | | 100K | | | | | |
MKEY1 R306 KEY1 FL_MISO 1K 0 R548 MFL_MISO
41 25 L SINGAPORE +--------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+
R264 100 F L _ M O S I R 2 4 9 3.3 1 K M F L _ M O S I 1SS355VM | s101 | C159 | X | WN20010 | WN20010 | WN20010 | WN20010 | WN20010 |
PRD 1.1 PRD
42 24 E SOUTH EUROPE
THM 1K 0.9 THM F L _ S T B 3.3 1 K R289 MFL_STB 3.3 R12 | | C189 | | 0.01/100 | 0.01/100 | 0.01/100 | 0.01/100 | 0.01/100 |
D10
43 23 R302 V TAIWAN | | C160 | | | | | | |
J4
s2
no_use
1SS355VM
PRPS R311 1.9 PRPS EVOL_SDA R2980 1K EVOL_SDA 1K
D12 D11
IC203 | | C179 | | | | | | |
R18
no_use
R10
44 22 2.2K F RUSSIAN
R17
12K
3.3
0
1K EVOL_SCL 100 R297 EVOL_SCL | | C180 | | | | | | |
A1037AK(Q/R)
0.7 DEST R303
5.5 D9 R :YF765
MICROPROCESSOR
1
1
2
2
3
3
4
4
s3
45 R5F100JEAFA 21 P LATIN AMERICA
0 100 2.2K | | C178 | | | | | | |
3.3/50
VREFM T :YF766
46 20 R8 S BRAZIL | | C177 | | | | | | |
C15
K :YF766
3.3 VREFP G P I O 2 0.3 R248 GPIO2
T1
47 19 6.0 22K A :YF766 | | C190 | | | | | | |
H THAI
SPBRY 3.3 SPBRY PRI 0 R262 100 PRI Q2 BG:YF766 | | C157 | | | | | | |
22K
R2
11
48 18 | | C161 | | | | | | |
L :YF766
5
DBG_Rx 0 1K Q1 4.0
49 17 3LN01C-TB-E C4 6.6V D3 +--------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+
UDZV4.7B
DBG_Tx 0 T U _ N _ R S T 3.3 R287 TU_N_RST R225 4.51 S S 3 5 5 V M | s102 | R197 | RD35710 | X | X | X | X | X |
2.2M
0.1/16
R1
50 16 C11 C8 C13
3.4
D5
R 2 7 6 1 0 0 10K | | | 10K | | | | | |
1SS355VM
DBG_LED 0 TU_SDA TU_SDA
24K
R3
PN202 51 15 +--------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+
SPARY CB203 no_use 3.3 SPARY TU_SCL
3.4 1 0 0 R272 TU_SCL
s17 0.1/100 s17
D2
s16
no_use 52 14 | s103 | D120 | WY16490 | X | X | X | X | X |
D8
100 3.5
1
1 2 3 4 5 6 7 8 9 10 11 12 13
3.3V
| | D119 | UDZV27B | | | | | |
REGC
N_HP_DET
+--------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+
HPRY
3.3 T O O L 0
3.3 N _ R S T
REM
X2
X1
VSS
VDD
PN201
D7
75K
R4
| s104 | TE102 | ZH27010 | ZH27010 | ZH27020 | ZH27010 | ZH27020 | ZH27020 |
3
0
0
HPRY 3.3 R 200 12V
DB105
3.3
| | |MST-208V1-02-76|MST-208V1-02-76|MST-208V1-02-76|MST-208V1-02-76|MST-208V1-02-76|MST-208V1-02-76|
2.1
0
no_use R 7V
no_use
3.3
R
UDZV4.7B
R283
+--------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+
1000P(B)
1000P(B) 1000P(B)
0.1/16
100/10
1.9
R268
J2
2
1/50
C276
C277
470K
C278
D207
M_PRY PRY | s105 | R186 | WW86320 | WW86320 | WW86390 | WW86390 | WW86390 | WW86320 |
C12
Writing port
C270
1000P(B)
R200
s8
100P(SL)
R299
D1 3.2 s11
62K
| | R196 | 82 | 82 | 330 | 330 | 330 | 82 |
0.1/16
10K C268
R292 100
C282
CB201 N_RST N_RST
s201
R280
R310
R286
450mm
C279
8.6 | | R191 | | | | | | |
82K
100
7.3
Q5
9 T_TXD PWR_DET PWR_DET 1SS355VM
DLS5D1-O(M)0.25
+--------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+
UDZV4.7B
R313
to CPU_PCB s6 s5
100
D204
C269
7.2 | s201 | R280 | RD35720 | RD35662 | RD35618 | RD35618 | RD35627 | RD35691 |
(FLASH)
8 T_BUSY/T_N_RST_OUT_N_RST_OUT +3.3M VOUT VDD 7.0S
0.1/16
C271
5
1
1SS355VM
R13
1000P(B)
1/25
| | | 20K | 6.2K | 1.8K | 1.8K | 2.7K | 9.1K |
Q6
UDZV4.7B
7 T_RXD/TOOLO TOOL0 MG GND
C272
C281
D203
s6
RY1
+--------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+
D4
1000P(B)
5 k-ohms
4.7K
s103
0.1/16
D119
R5
C252
6 T_PGM/OE PRPS CE DELAY
R15
XL201 | s202 | R209 | RD35447 | RD35447 | RD35622 | RD35622 | RD35622 | RD35622 |
s4
T_N_RST_OUT
4
3
C265
s14
Q7
R7
5 T_VPP | | R208 | 47 | 47 | 2.2K | 2.2K | 2.2K | 2.2K |
IC1 2.8 +--------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+
4 GND
10 W
R11
R1190H033B-T1-F
s13
D120
Q3
no_use
| s203 | C286 | X | X | US06222 | US06222 | US06222 | US06222 |
R307
s103
TOOL0
N_RST
1.65V
4.7/16
1
s10
3 N_T_RST N_RST s18 | | C285 | | | 220P(SL) | 220P(SL) | 220P(SL) | 220P(SL) |
REM
R14
C3
470/10
4.7/16
no_use 1.6 +--------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+
2 T_SCLK
C2
Q8
C1
220/10
C14
s102
KTC4376-Y-RTF/P
C273
R197
s12 mW
REC_N_MUTE
PRE_N_MUTE
3.3_PON
5.2 15.6
R281
1 T_VDD PN1 1.0V
KTC4376-Y-RTF/P
+5.0V KTA1661-Y-RTF/P
10K
12V
no_use
no_use 0.9 mA
Q121
no_use
D6
R282
8.2 25mW
MMG
1K
s7 15.6 1N4003S
C5
+8.44V
2200/25
s24
R16
s15
52044
C10
R9
Q124
7mA
Q129
10K
R6
22
MCH6336-TL-E
C7
3.3 D112
for TUNER 5.7 Interchangeable Parts at Manufacture-Stage
2N5401S-RTK/P
R190
For EVOL 7.2
1000P(B)
Q126
3.3K Mark Reference Parts Number Parts Name
R284
100K
no_use
Q209
no_use
C9
J5
R169
D603,604,607 1SS355
no_use
0.1/100
no_use
C287
2N5401S-RTK/P 57.6
C139
C288
R194
C172
no_use
&1 MA111
1000/63
D781
10K 22K
R178
R168
1.0K
R183
330/25
Q208
C149
KDS160-RTK/P
10K
C144
Q131
0.1/100
R323
3.3 3.3
R175
100
Q120
100P/100
no_use
2SA1037AK(Q/R/S)
no_use
no_use
R187
R324
&2 Q601,604,610
2.4K
C170
5.7
47K
39K
SIGN8576
no_use
no_use
C258
5.6V
C141
9.2
D107
DTC114EKA
UDZV9.1B
2SC1740S[R/S]
UDZV27B UDZV15B
C257
9.04V
10/50
C152
C255
C256
DB105
C147
D108
D115
J101 &3 Q452-454,609 2SC3311A[Q/R/S]
3.3 A1037AK(Q/R/S)
CB202
4
RST TU_N_RST no_use
2.2/50
J104
3.3
C266
SDIO TU_SDA R270 R274
C153
ST1 no_use
D118
D116
SCK 4.7K 2SA1015[Y]
TU_SCL 100K &4 Q506
-6.3 R266 KTA1266
100P/100
GPI02 J102 JIS C 3101 J103
GPIO2
R188
Q205
R326
C171
2.4K
100 0.01
47K
R259
R179 UDZV24B
NC -6.3 C166 C167
22K
4.7/50
RECOUT MUTE JIS C 3101
C146
D109
100K 2SC1815[Y]
100/35
47/50
A1037AK(Q/R/S)
C142
GND 3.3
C145
0.1/100 0.1/100 &5 Q505,607
2.6 KTC3198
2.2/50
R325
Rch -24.25V
10K
C267
Q132
R314
R315
R271 R275 Q122
1000/63
2.2K
R184
22
22
+5T
C150
10K
R174
4.7K
100
2N5551S-RTK/P
100K
0.1/100
DTC144EKA
R195
Lch R267 1.9 for FL
&6 Q606
12K
to POWER TRANSFORMER
C165
Q206 2N5551S-RTK/P KRC104S-RTK/P
no_use
R316
R317
100 3.3 PREOUT MUTE
Q127
no_use
-25.0
C232
no_use
C233
22
22
R308
R189
120K
R261 3.2 Q123 3.3K
-6.3
Q130
100K 1N4003S
R170 -24.85V -28.9
no_use
R288
IC1: R1190H033B-T1-FE
TRANSFORMER
no_use C275
R555
no_use
ST103
IC201: NJM2068MD-TE2
Voltage regulator
C253
5 k-ohms 5 k-ohms
CB103
H 1 Dual operational amplifier
0 . 1 / 1 0 00 . 1 / 1 0 0
C154
R199
470K
D113 E 2
HPRY
SPARY
10 W 10 W
D5SBA60
H 3 Thermal Shutdown
SPBRY
C155
R198
VHI
VDD 5 1 VOUT
470K
PRD
PRI
EVOL_SCL OUT1 1 8 +VCC
EVOL_SDA
60.4
ST102
UDZV6.2B
no_use
no_use
no_use
R231
C218
D201
5
C140
G101
6 5 4
7 3
5 k-ohms Inrush Peak
3 6800/66
4
8
1
2
10 W Short Current Current
UDZV6.2B
no_use
no_use
2
R230
D202
1
JK201
no_use
LEFT
R221
no_use R
R167
-33.6
R322
C143
CE 3 2 GND
2P2.7K 2P2.7K 6800/66
OUT L R-S A-S
Mute
4
8
no_use
no_use
no_use
3 V+ -6.3 TE102
2 IC201
1
7
TE101
no_use 8
s104
DELAY
PHONO EQ
50V 60.1 981-2A-48DS-SP7 +
NJM2068MD-TE2 RY102 SPB
R127
8.2K
R-S A-S 4 5 5 6
R244 - Pin No. Symbol Description
R113
C183
1/16W=62.5mW
C181
no_use C182
C184
no_use
L
8.2K
no_use
C189
32.8mW
no_use
2.2/50
s101
s101
s101
s101
10/16
C157
C190
C159
RY102
R157
C214
470K
C130
C175
C176
8 no_use 7
47K
40.3 3 2
2.0mA -
1 VOUT Output Pin
R128
no_use
8.2K
R549
2.0mA
R550
R234 R238 R240 10/16 R242 R246 PHOL 981-2A-48DS-SP7 SPA
no_use
RJ-1074+09-0H54
KTD600K-Y-U/PH
6 9
C126
2200P/100 2200P/100
+
100K 8.2K 82 680 470 2 GND Ground Pin
330/16
C226
R232
R114
C224
8.2K
Q119
C228
20.5
180
32.8mW R158
60.0 2N5401S-RTK/P 1 0G
s101 s101
R129
C161 C160
C220 C222
8.2K
TE101
R208 Q109
10K 3 CE Chip Enable Pin ("H" Active)
0 . 0 3 3 / 1 0901 0 0 P / 1 0 0
A/B SPEAKERS 4 DELAY Delay Pin (for setting Inrush Current Limit Time)
R228
R s202
R155
JIS C 3101
47K
220P(SL)
R115
47K
0.8
8.2K
R201
47/100
C221 C223
33/63
C202
R161
C168
C120
5 VDD Input Pin
C229
J203
Q107 Q113
2STC4468
0.1/16
330/16
C285
C201
s203
2.2
C225
10/16 180
PHONO
C3906KT146(R,S)
PHOR 47P(CH) 0.6 2.2K 2.2 TE102
PHONO R235 R239 R241 10/16 R243 R247
-----
C 1 8 6n o _ u s e
no_use
no_use
no_use
10/100
R551
R552
no_use
no_use
220P(SL)
s101
C179
C180
D2704(K)
no_use
C124
D121
C173
s101
C215
C158
C174
C162
100K 8.2K 82 680 470 Q117
C286
C203
R229
3 1
s203
R139
C227
100
981-2A-48DS-SP7
47K
2.354mA R101 +
no_use
R245 RY103
C185
C187
C188
1 SPBTE101 3
C112
IC101: LM61CIZ
5.6K
1K 3 2
R135
470K 470 no_use -
A1514K(R/S)
A1514K(R/S)
R209
L 50mW 107uA RY103
R
s101
C177
6 NJM2068MD-TE2 R123
s101
s202 5P(CH) 4 4
C178
C104 0.04 4 5 -
7 R107 R121 R163
Temperature sensor
981-2A-48DS-SP7
981-2A-48DS-SP7
981-2A-48DS-SP7
IC201 SPA TE101
5 1K 0.1 33K 10 2 2
10/50 no_use
0.022/100
+ s104
no_use
no_use
no_use
0.6
2P0.1
R147
R151
V- 4 Q101 Q103 C118
RY101
330K
C131
PJ203
3
RY101
-0.6V L102 5G
1.2K
R119
KTB631K-Y-U/PH
R202 150P(SL)
100P/100
75p 1UH
2
R R164
220P(SL)
C108
R109
1L Q110 D103
R104
470 R149
150P(SL)
100K
33K
R218
C204
0
470K
C114
47K
100/16
510
BAV103
CD IN
C110
no_use
RIGHT
R159
1P10
C127
KTC3206Y-AT
no_use
BAV103
D105
Q114
2STC4468
C135
CD 3 CD CD
Q105
R144
220P(SL)
R140
330
R216
2.2
470K
776mV 60.3
C205
R152
no_use
L=1
15K
R125
R=2 0.24V
RY3
R320
R319
RY2
R318
R L R206
RY1
270
270
-60.0
270
4.3 L2/L3L B1 A1 PHL 840uW
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
no_use
R111
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
2 470
(SP_B)
10/100
(SP_A)
C115
10/50C236
820
no_use
4.3 L2/L3R B2 A2 PHR 0.84V
(HP)
C121
R130
120
1.0mA 2.0mA
R186
R191
R196
10/50C237
s105
s105
s105
4.3 L1/L2L C1 FIL 4.3 C254 10/50
7 10/50C234
4.3 L1/L2R C2 GND 0 -50V
C133
981-2A-48DS-SP7
IC202
981-2A-48DS-SP7
R212 4.3
981-2A-48DS-SP7
TU/L1L D1 SDA
220P(SL)
4L R 470 10/50C242
4.3 TU/L1R
1SS355VM
1SS355VM
1SS355VM
R222
C210
6
470K
RY101
RY102
RY103
10/50C243
D110
D114
D117
CDL 4.3 8.6
10/50 C238 C262
TUNER CDR 4.3 4.3
1
11
10/50 C239 C259 10/50
6 TUNER MJL 4.3 4.3 C106 R108
LINE1
220P(SL)
100P(SL)
10/50 C241 C260 Q125 Q128 Q133
no_use
TPBK/L2OR 4.3 4.3 10/50 R255 0
BD3491FS
R L 10 R213 10/50C230
4.3 0.6 R256 2N5551S-RTK/P
4.3 1/50 Q203 3.2 2N5551S-RTK/P 2N5551S-RTK/P
5 470
0.01(B)
0.01(B)
0.01(B)
10/50C231 D2704(K) 10K
TPBK/L2OL 4.3 4.3 R252
C134
C148
C151
C156
no_use PJ201 10/50 C244 C248 0.22/50
4.3 4.3 4.7K
E
PJ202 10/50 C245 C249 0.22/50 -60.0
4.3 4.3 R253
R112
R126 no_use
10/100
2 R214 1800P/100 C246
C116
C250 0.22/50
820
4.7K
C122
R131
L 4.3 4.3
120
3.3 R171
220P(SL)
C212
100/6.3
470K
R153
R172 4.7K 0.7
15K
C264 D2704(K) 10K
no_use
1.2K
JIS C 3101
1P10
R160
0
KTC3206Y-AT
R254
R141
5 10/50
330
J207
4.7K
E-VOLUME
LINE2 LINE1 IN
1
no_use
2STC4468
no_use
220P(SL)
C128
BAV103
C136
R177
R182
R185
47K
47K
47K
2.2
R227
D106
470K
C213
R145
0.022/100
150P(SL)
R Q106 56K
C117
Q115
1 R215
C132
R R165
100/16
BAV103
100P/100
R150
C111
470
7
R110
C109
33K
510
RJ-1074_09-0353 Q111 D104
LINE PJ202
150P(SL)
2P0.1
R148
R154
100K
330K
R105
R120
6
1.2K
L KTB631K-Y-U/PH 4P 400MM B&C BL
220P(SL)
A1514K(R/S)
A1514K(R/S)
R219
IC203: R5F100JEAFA
C208
470K
C3906KT146(R,S)
401- 10/50 1K 33K 10
E
PB
LINE3 LINE2
9
C103 R106 R122
5P(CH)
Q118
R162
R103 HPR 16 bit single chip microprocessor
220P(SL)
5.6K
R136
470 R269 W102
R217
1P470
470K
C209
R142
C113 R124 1K
100
PN206
C102 D2704(K)
no_use
2STC4468
10/100
4 R207
C125
D122
2.2K 2.2 no_use
R 47P(CH) TIMER ARRAY
2.2 1000P
R553 C289
KTD600K-Y-U/PH
RJ-1074_09-0353 Q108 Q116 47K UNIT (8ch)
R116
47/100
8.2K
33/63
C123
C169
8.2K
Q112
8.2K R132
47P(CH)
C206
R117
100K
8.2K
R236
TI01/TO01/P16 ch1 PORT 2 6 P20 to P27
R133
10K
no_use
C129
11 Q201
R118
8.2K
R134
R237 (TI02/TO02/P15)
R211
P30, P31
100K
C207
PORT 3 2
10K
8 R204 10/16 D2704(K) R277 60.0 TI03/TO03/P31 ch3
R
RJ-1074_09-0353
1K
C217
1.2K
0.1/2W
MAIN (1) (TI03/TO03/P14)
(TI04/TO04/P13) ch4
PORT 4 2 P40, P41
MAIN
PORT 5 2 P50, P51
(TI05/TO05/P12) ch5
CB502
HNV-10SS61
32 31
V501
29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 2 1
MAIN (2) 0Ω + 1.0 kΩ + 1.0 kΩ + 1.5 kΩ + 2.2 kΩ + 3.3 kΩ + 4.7 kΩ TIMER
PORT 13
P130
P137
F2
F2
10G
P16
P15
P14
P13
P12
P11
P10
F2 LOW-SPEED
NP
1G
2G
3G
4G
5G
6G
7G
8G
9G
P9
P8
P7
P6
P5
P4
P3
P2
P1
NP
F1
F1
VI87820
Detected voltage value ON-CHIP
12-BIT INTERVAL
to POWER TRANSFORMER 0 – 0.22 V 0.23 – 0.64 V 0.65 – 1.06 V 1.07 – 1.55 V 1.56 – 2.09 V 2.10 – 2.62 V 2.63 – 3.12 V TIMER P140,
G10
P16
P15
P14
P13
P12
P11
P10
W502A
OSCILLATOR PORT 14 3
G2
G3
G4
G5
G6
G7
G8
G9
P9
P8
P7
P6
P5
P4
P3
P2
P1
F1 3.3M
P146, P147
MP_SW at 40 pin
R502
270
PHL
270 R504
REAL-TIME
270
SW_SPAB 120mm
-21.3
-21.3
-21.3
-21.3
-21.3
-21.3
-21.3
-21.3
-21.3
-16.8
21.0
-21.0
1-8.9
-21.0
-21.1
-21.0
-18.9
-18.9
-18.8
-18.8
-23.1
-23.1
-23.4
-16.7
-16.7
R503
270
UNIT0 (4ch)
INPUT INPUT TREBLE TREBLE BASS BASS PURE DATA FLASH MEMORY AVREFE/P20
D502
KEY0
0.1/16
RxD0/P11(RxD0/P16) AVREFE/P21
47/16
C516
P8
P9
P10
P11
P12
P13
P14
P15
P16
C517
UART0
RxD1/P03 KR0/P70 to
D501
SEG9
SEG8
SEG7
SEG6
SEG5
SEG4
SEG3
SEG2
SEG1
Vss
TxD1/P02 KR7/P77
+ 7.5 kΩ + 15 kΩ
DRIVER
22
21
20
19
18
17
16
15
14
13
12
1 2 3 4 5 6 7 8 9 10 11
47/35
C501
C503
CONTROL
P4 SEG13 CLK
at 41 pin RAM
C502
SCK01/P75 DETECTOR
P3 SEG14
IC501
DMOSI PRM_SW SI01/P74 CSI01
P2 SEG15 DMISO Blue/115V
A/D value SO01/P73
1
VOLTAGE
SL14 s20
CB1
s21
C523
G10 Grid10 LED0 Orange MP_SW
W503A
KEY1
R547
SCL00/P10
to chassis VDD VSS TOOL RxD/P11
34
35
36
37
38
39
40
41
42
43
44
s22
no_use
3.3
0.1/16
470
SELECTOR
F2
100P(SL)
C521
D510
Purple
SW514
C518
VOL_RA 3
A B SDA00/P11 TOOL TxD/P12
Grid9
Grid8
Grid7
Grid6
Grid5
Grid4
Grid3
Grid2
Grid1
Vdd
Vss
Yellow MG
Red/115V
CB2
s21
6
5
4
R528
4
4
C2412K(Q/R/S) C520
15K SCL11/P30 X2/EXCLK/P122
0.1/16
C515
SW516
R524
100P(SL) G502
R508
R509
G9
G8
G7
G6
G5
G4
G3
G2
-21.3 SDA11/P50
100K
100K
no_use VI87840
A B
470
Gray/0V
FL_SCK
FL_STB
A B INTERFACE IICA0
SPEAKERS SCLA0/P60(SCLA0/P14)
to POWER TRANSFORMER Sound processor with built-in surround sound function SERIAL ARRAY VOLTAGE
SPEAKERS UNIT1 (2ch) REGULATOR
REGC
KEY0
SW_PDRT
SW_SPAB
KEY1
RxD2/P14(RxD2/P76) PCLBUZ0/P140
IC501: HT16515-44LQFP UART2 RxD2/P14(RxD2/P76)
C507 0.1/16
0.1/16
R505 2 (PCLBUZ0/P31),
C505
C509
A1 A2 FIL GND SDA SCL VCC OUT1 SB1 SR SB2 OUT2 BCB1 BCA1 BCA2 BCB2 TxD2/P13(TxD2/P77)
22K
LINSEL CLOCK OUTPUT PCLBUZ1/P15 INTP0/P137
JIS C 3101
no_use
no_use
no_use
0.1/16
D506
D508
J505
no_use
no_use
no_use
no_use
no_use
SW502
SW506
SW508
SW510
SW512
MULITIPLY- CONTROL
MG
+3.3M 3.3 sensor Gain= ±14 dB/2dB step
• Treble
Surround 7 SCK21/P70
CSI21
ACCUMULATOR INTP5/P16
+3.3S <FM MODE> <MEMORY> <FM/AM> < PRESET > << TUNING >> SI21/P71
Gain= ±14 dB/2dB step SO21/P72 INTP0/P140
6
R513
R546 R523 R527 R530 R532 R534 HP • Volume ACCESS CONTROL INTP6/P74 to
PDRT_LED SCL20/P15
FL_MISO FL_MISO
U501
4.7K 3.3K 2.2K 1.5K 1K 1K CB102 VOLUME VOL 0 dB – -87 dB/1 dB step, -∞, Independent control 8 14-29
SDA20/P14
IIC20 4
INTP11/P77
VCC GND HPL • Input Gain
FL_STB FL_STB
VOL_ENCODER
SW503
SW505
SW507
SW509
SW511
SW513
VOUT 851-
0 dB – +8 dB/2 dB step, 12, 16, 20 dB 9 SCL21/P70
FL_MOSI FL_MOSI HPE JK101 Treble/Bass IIC21 BCD
L
R PHONES REB161(9X7)PVB2 • Surround SDA21/P71 ADJUSTMENT
10
HLMP-Y701-G0000
HLMP-Y701-G0000
FL_SCK FL_SCK
SW517
GND Gain= OFF, Low, Middle, High
0.1/16
10/16
HPR
C514
C513
R544
R538
R540
REM
JY-6317Y-03-030
47K
47K
- + - + << >>
0.01/100
no_use
C163
W503B
A B COM
D511
0.01/100
no_use
MPSW MP_SW
D514
D102
D101
C164
VOL_RA
R554
VOL_RA
R545
1.5
Volume
Volume
430
R543
620
SAN-SAN
and must be replaced
1.3K
D512
SW518
FG
52044 10,11
Q503
0.03 Q504 SW No SW515 SW516 no_use
Input Selector
D513 39-42
DTC114EKA
STANDBY/ON 3.3
PURE DIRECT KEY1 SP-A SP-B
no_use with parts having specifications equal to those originally installed.
★ Schematic diagram is subject to change without notice.
SW No SW513 SW511 SW509 SW507 SW505 SW503
indicator DTC114EKA indicator KEY0 INPUT+ INPUT- TREB+ TREB- BASS+ BASS- FL
PURE DIRECT 50k 50k 50k 50k 50k 50k 50k 50k 50k 50k
1-4 13,43 12,44
30
B1 B2 C1 C2 D1 D2 E1 E2 F1 F2 SEL2 SEL2 VOL1 VOL2 TC2 TC1
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
41
A-S201
A-S201
C.EL.CHP : CHIP ELECTROLYTIC CAP R.ARRAY : RESISTOR ARRAY
C.MICA : MICA CAP R.CAR. : CARBON RESISTOR
C.ML.FLM : MULTILAYER FILM CAP R.CAR.CHP : CHIP RESISTOR
C.MP : METALLIZED POLYESTER FILM CAP R.CAR.FP : FLAME PROOF CARBON RESISTOR
C.MYLAR : MYLAR FILM CAP R.CEMENT : CEMENT RESISTOR
C.MYLAR.ML : MULTILAYER MYLAR FILM CAP R.CHP : CHIP RESISTOR
C.NIOB.OXD : NIOBIUM OXIDE CAP R.FUS : FUSIBLE RESISTOR
C.PAPER : PAPER CAPACITOR R.MTL.CHP : CHIP METAL FILM RESISTOR
C.PLS : POLYSTYRENE FILM CAP R.MTL.FLM : METAL FILM RESISTOR
C.POL : POLYESTER FILM CAP R.MTL.OXD : METAL OXIDE FILM RESISTOR
C.PP : POLYPROPYLENE FILM CAP R.MTL.PLAT : METAL PLATE RESISTOR
C.PP.CHP : CHIP POLYPROPYLENE FILM CAP RSNR.CE : CERAMIC RESONATOR
C.TNTL : TANTALIUM CAP RSNR.CRYS : CRYSTAL RESONATOR
C.TNTL.CHP : CHIP TANTALIUM CAP SCR.BND.HD : BIND HEAD B-TIGHT SCREW
C.TRIM : TRIMMER CAP SCR.TERM : SCREW TERMINAL
CN : CONNECTOR SCR.TR : SCREW,TRANSISTOR
CN.BS.PIN : CONNECTOR,BASE PIN SURG.PRTCT : SURGE PROTECTOR
CN.CANNON : CONNECTOR,CANNON SUPRT.PCB : P.C.B. SUPPORT
CN.DIN : CONNECTOR,DIN SW.LEVER : LEVER SWITCH
CN.FLAT : CONNECTOR,FLAT CABLE SW.MICRO : MICRO SWITCH
CN.FFC : CONNECTOR,FLEXIBLE FLAT CABLE SW.LEAF : LEAF SWITCH
CN.HDMI : HDMI CONNECTOR SW.PUSH : PUSH SWITCH
CN.PHOTO.R : PHOTO FIBER SENSOR,RECEIVED SW.RT : ROTARY SWITCH
CN.PHOTO.T : PHOTO FIBER SENSOR,TRANSMITTED SW.RT.ENC : ROTARY ENCODER
D.SCHOTTKY : SCHOTTKY BARRIER DIODE SW.RT.MTR : ROTARY SWITCH WITH MOTOR
DIODE.ARRAY : DIODE ARRAY SW.SLIDE : SLIDE SWITCH
DIODE.BRG : DIODE BRIDGE SW.TACT : TACT SWITCH
DIODE.CHP : CHIP DIODE TERM.SP : SPEAKER TERMINAL
DIODE.VAR : VARACTOR DIODE TERM.WRAP : WRAPPING TERMINAL
DIODE.ZENR : ZENER DIODE THRMST.CHP : CHIP THERMISTOR
DIODE.Z.CHP : CHIP ZENER DIODE TR : TRANSISTOR
DIODE.PHOT : PHOTO DIODE TR.CHP : CHIP TRANSISTOR
FER.BEAD : FERRITE BEADS TR.DGT : DIGITAL TRANSISTOR
FER.CORE : FERRITE CORE TR.DGT.CHP : CHIP DIGITAL TRANSISTOR
FET.CHP : CHIP FET TR.PAIR : PAIR TRANSISTOR
FL.DSPLY : FLUORESCENT DISPLAY TRANS : TRANSFORMER
FLTR.CE : CERAMIC FILTER TRANS.PULS : PULSE TRANSFORMER
FLTR.COMB : COMB FILTER MODULE TRANS.PWR : POWER TRANSFORMER
FLTR.LC.RF : LC FILTER,EMI VARISTOR.C : CHIP VARISTOR
FUSE.CHP : CHIP FUSE VOLT.SELCT : VOLTAGE SELECTOR
GND.MTL : GROUND PLATE VR : ROTARY POTENTIOMETER
GND.TERM : GROUND TERMINAL VR.MTR : POTENTIOMETER WITH MOTOR
JUMPER.CN : JUMPER CONNECTOR VR.SLIDE : SLIDE POTENTIOMETER
JUMPER.TST : JUMPER,TEST POINT VR.SW : POTENTIOMETER WITH SWITCH
L.DTCT : LIGHT DETECTING MODULE VR.TRIM : TRIMMER POTENTIOMETER
43
A-S201
MAIN
Ref No. Part No. Description Markets Ref No. Part No. Description Markets
* ZH174800 P.C.B. MAIN R * C149-150 UR779100 C.EL 1000uF 63V
* ZH174900 P.C.B. MAIN T C151-153 US064100 C.CE.CHP 0.01uF 50V B
* ZH175000 P.C.B. MAIN K * C154-155 WW194100 C.MYLAR 0.1uF 100V
* ZH922600 P.C.B. MAIN A C156 US064100 C.CE.CHP 0.01uF 50V B
* ZH175100 P.C.B. MAIN BG * C157 WN200100 C.CE.M.CHP 0.01uF 100V TKABGL
* ZH175200 P.C.B. MAIN L * C159-161 WN200100 C.CE.M.CHP 0.01uF 100V TKABGL
CB1-2 WN103000 CLIP.FUSE TP00351-31 R * C164 WN200100 C.CE.M.CHP 0.01uF 100V
CB3 V9377900 CN.BS.PIN 4P R * C165-167 WW194100 C.MYLAR 0.1uF 100V
CB4 VG879900 CN.BS.PIN 2P C168-169 UR877330 C.EL 33uF 63V
CB5-6 WN103000 CLIP.FUSE TP00351-31 C170-171 WJ608100 C.MYLAR 100pF 100V
CB7 VG879900 CN.BS.PIN 2P * C172 WW194100 C.MYLAR 0.1uF 100V
CB101 VB389900 CN.BS.PIN 3P * C177-180 WN200100 C.CE.M.CHP 0.01uF 100V TKABGL
CB102 VB858300 CN.BS.PIN 4P * C189-190 WN200100 C.CE.M.CHP 0.01uF 100V TKABGL
CB103 LB932030 CN.BS.PIN 3P C201 US135100 C.CE.CHP 0.1uF 16V
CB201 VQ044400 CN.BS.PIN 9P C202-205 US062220 C.CE.CHP 220pF 50V B
A-S201
MAIN
Ref No. Part No. Description Markets Ref No. Part No. Description Markets
C512-513 US035100 C.CE.CHP 0.1uF 16V B Q117-118 WF549900 TR 2SC3906K T146 R,S
C514 UM397100 C.EL 10uF 16V Q119-120 WC397600 TR 2N5401S-RTK/P
C515-516 US035100 C.CE.CHP 0.1uF 16V B Q122 WC398300 TR 2N5551S-RTK/P
C517 UM397470 C.EL 47uF 16V Q123 ZE918100 TR KTA1664-Y-RTF/P
C518-520 US062100 C.CE.CHP 100pF 50V B * Q124 ZE933000 TR KTC4376-Y-RTF/P
C521-522 US035100 C.CE.CHP 0.1uF 16V B Q125 WC398300 TR 2N5551S-RTK/P
C523 US062100 C.CE.CHP 100pF 50V B Q126 WC397600 TR 2N5401S-RTK/P
D1-4 WW783900 DIODE 1SS355VM Q127-128 WC398300 TR 2N5551S-RTK/P
D5 WY163100 DIODE.ZENR UDZV4.7B * Q129 ZG245700 TR KTA1661-Y-RTF/P
D6 WY164100 DIODE.ZENR UDZV12B R * Q130 ZG245800 TR KTC4373-Y-RTF/P
D7 WH471700 DIODE.BRG DB105 1A 600V Q131 WC397600 TR 2N5401S-RTK/P
D8 WU201600 DIODE 1N4003S TP R Q132-133 WC398300 TR 2N5551S-RTK/P
D9-10 WW783900 DIODE 1SS355VM Q201-204 WC883400 TR 2SD2704 K
D103-106 ZA984400 DIODE BAV103 Q205-206 VV556500 TR 2SA1037K Q,R,S
D108 WY163800 DIODE.ZENR UDZV9.1B Q208 VV655400 TR.DGT DTC114EKA
A-S201
D109 WY164800 DIODE.ZENR UDZV24B Q209 WQ381000 FET MCH6336-TL-E
D110 WW783900 DIODE 1SS355VM Q502 VV556400 TR 2SC2412K Q,R,S
D111-112 WU201600 DIODE 1N4003S TP Q503-504 VV655400 TR.DGT DTC114EKA
D113 VN953300 DIODE.BRG D5SBA60 5A 600V * R9 WW862500 R.CAR.FP 22Ω 1/4W
D114 WW783900 DIODE 1SS355VM R11 WW975700 R.MTL.OXD 47KΩ 1/4W R
D115 WY164300 DIODE.ZENR UDZV15B R14 WW975700 R.MTL.OXD 47KΩ 1/4W R
* D116 WY164900 DIODE.ZENR UDZV27B R102-103 V8071300 R.MTL.FLM 470Ω 1W
D117 WW783900 DIODE 1SS355VM * R135-136 WW865700 R.CAR.FP 5.6KΩ 1/4W
D118 WH471700 DIODE.BRG DB105 1A 600V * R137-138 WW865100 R.CAR.FP 2.2KΩ 1/4W
D119-120 WY165200 DIODE.ZENR UDZV36B R R139 WW863300 R.CAR.FP 100Ω 1/4W
D201-202 WY163400 DIODE.ZENR UDZV6.2B * R140-141 WW863900 R.CAR.FP 330Ω 1/4W
D203-204 WY163100 DIODE.ZENR UDZV4.7B R142 WW863300 R.CAR.FP 100Ω 1/4W
D207 WY163100 DIODE.ZENR UDZV4.7B R143-146 WW861300 R.CAR.FP 2.2Ω 1/4W
* D501-502 WZ443400 DIODE.ZENR UDZV2.4B * R147-148 ZG861500 R.WW 0.1Ω 2W
D511 WZ745700 LED HLMP-Y701-G0000 R159-160 V8070300 R.MTL.FLM 10Ω 1W
D514 WZ745700 LED HLMP-Y701-G0000 R162-163 WW862100 R.CAR.FP 10Ω 1/4W
F1 WQ211100 FUSE 8A 125V UCR * R166-167 VC762500 R.MTL.OXD 2.7KΩ 2W
F1 VV071800 FUSE 4A 250V TKABGL * R170 WW863700 R.CAR.FP 220Ω 1/4W
F2 VV071800 FUSE 4A 250V R R175 WW863300 R.CAR.FP 100Ω 1/4W
G101 V5995800 PLATE.GND * R178 WW864600 R.CAR.FP 1KΩ 1/4W
* IC1 YD268A00 IC R1190H033B-T1-FE * R179 WW865100 R.CAR.FP 2.2KΩ 1/4W
IC101 X0515B00 IC LM61CIZ THERMAL * R186 WW863200 R.CAR.FP 82Ω 1/4W RTL
IC201 X3505A00 IC NJM2068MD-TE2 * R186 WW863900 R.CAR.FP 330Ω 1/4W KABG
* IC202 YF439A00 IC BD3491FS * R187-188 WW865200 R.CAR.FP 2.4KΩ 1/4W
IC203 YF832A00 IC.CPU R5F100JEAFA (unwritten) * R191 WW863200 R.CAR.FP 82Ω 1/4W RTL
* IC501 YF471A00 IC HT16515-44LQFP * R191 WW863900 R.CAR.FP 330Ω 1/4W KABG
JK101 V4478300 JACK.PHONE JY-6317Y-03-030 * R192 WW975500 R.MTL.OXD 39KΩ 1/4w
PJ201 WN303900 JACK.PIN 6P RJ-1074+09-0H54 * R193 WW866600 R.CAR.FP 22KΩ 1/4W
PJ202 WD195400 JACK.PIN 6P * R196 WW863200 R.CAR.FP 82Ω 1/4W RL
Q1 WH445000 FET 3LN01C-TB-E * R196 WW863900 R.CAR.FP 330Ω 1/4W AG
Q2 ZC298400 TR 2SA1037AK R,S TP * R314-317 WW862500 R.CAR.FP 22Ω 1/4W
* Q3 ZE933000 TR KTC4376-Y-RTF/P * R318-320 WW863800 R.CAR.FP 270Ω 1/4W
* Q5 ZG245700 TR KTA1661-Y-RTF/P R * R321-322 VC762500 R.MTL.OXD 2.7KΩ 2W
Q6-7 WC397600 TR 2N5401S-RTK/P R RY1 WQ804100 RELAY DC DLS5D1-O(M)0.25
Q8 WC398300 TR 2N5551S-RTK/P R * RY101-103 ZJ359600 RELAY 981-2A-48DS-SP7
Q101-104 WD896300 TR 2SA1514K R,S ST1 V4040500 SCR.TERM M3
Q105-106 WC292200 TR KTC3206Y-AT ST101 WA246200 SCR.TERM 3.5
Q107-108 WC883400 TR 2SD2704 K ST102-103 V4040500 SCR.TERM M3
* Q109 ZG214200 TR KTD600K-Y-U/PH SW1 WV382900 SW.SLIDE SL14 R
* Q110-111 ZG214100 TR KTB631K Y,GR SW517 WU974000 SW.RT.ENC REB161(9X7)PVB20FI
* Q112 ZG214200 TR KTD600K-Y-U/PH SW518 WD483100 SW.TACT SKRGAAD010
# Q113-116 ZD043300 TR.POWER 2STC4468 T1 YF765A00 TRANS R
✻ New Parts Note) Those parts marked with “#” are not ✻ New Parts
included in the P.C.B. assembly.
45
A-S201
MAIN
Ref No. Part No. Description Markets Ref No. Part No. Description Markets
T1 YF766A00 TRANS TKABGL
TE102 ZH270100 TERM.SP 8P BANANA RTA
TE102 ZH270200 TERM.SP 8P NON-BANANA KBGL
U501 WW715100 L.DTCT SIR8430MH6
V501 ZG358500 FL.DSPLY HNV-10SS61
* ZG943300 FL.SPACER
WP935100 HOLDER 1P
A-S201
Carbon Resistors
Value 1/4W Type Part No. 1/6W Type Part No. Value 1/4W Type Part No. 1/6W Type Part No.
1.0 Ω HJ35 3100 HF85 3100 11 kΩ HF45 7110 HF45 7110
1.8 Ω HJ35 3180 ✻ 12 kΩ HJ35 7120 HF85 7120
2.2 Ω HJ35 3220 HF85 3220 13 kΩ HF45 7130 HF45 7130
3.3 Ω HJ35 3330 HF85 3330 15 kΩ HF45 7150 HF45 7150
4.7 Ω HJ35 3470 HF85 3470 18 kΩ HF45 7180 HF45 7180
5.6 Ω HJ35 3560 HF85 3560 22 kΩ HF45 7220 HF45 7220
10 Ω HF45 4100 HF45 4100 24 kΩ HF45 7240 HF45 7240
15 Ω HJ35 4150 HF85 4150 27 kΩ HJ35 7270 HF85 7270
22 Ω HF45 4220 HF45 4220 30 kΩ HF45 7300 HF45 7300
27 Ω HJ35 4270 HF85 4270 33 kΩ HF45 7330 HF45 7330
33 Ω HF45 4330 HF45 4330 36 kΩ HF45 7360 HF45 7360
39 Ω HJ35 4470 HF85 4390 39 kΩ HF45 7390 HF45 7390
47 Ω HF45 4470 HF45 4470 47 kΩ HF45 7470 HF45 7470
56 Ω HF45 4560 HF45 4560 51 kΩ HF45 7510 HF45 7510
68 Ω HF45 4680 HF45 4680 56 kΩ HF45 7560 HF45 7560
75 Ω HF45 4750 HF45 4750 62 kΩ HF45 7620 HF45 7620
82 Ω HF45 4820 HF45 4820 68 kΩ HF45 7680 HF45 7680
91 Ω HF45 4910 HF45 4910 82 kΩ HF45 7820 HF45 7820
100 Ω HF45 5100 HF45 5100 91 kΩ HF45 7910 HF45 7910
110 Ω HJ35 5110 HF85 5110 100 kΩ HF45 8100 HF45 8100
120 Ω HF45 5120 HF45 5120 110 kΩ HF45 8110 HF45 8110
150 Ω HF45 5150 HF45 5150 120 kΩ HF45 8120 HF45 8120
160 Ω HJ35 5160 ✻ 130 kΩ HF45 8130 ✻
180 Ω HF45 5180 HF45 5180 150 kΩ HF45 8150 HF45 8150
200 Ω HF45 5200 HF45 5200 180 kΩ HF45 8180 HF45 8180
220 Ω HF45 5220 HF45 5220 220 kΩ HJ35 8220 HF85 8220
270 Ω HF45 5270 HF45 5270 270 kΩ HF45 8270 HF45 8270
330 Ω HF45 5330 HF45 5330 300 kΩ HF45 8300 HF45 8300
390 Ω HF45 5390 HF45 5390 330 kΩ HF45 8330 HF45 8330
430 Ω HF45 5430 HF45 5430 390 kΩ HJ35 8390 HF85 8390
470 Ω HF45 5470 HF45 5470 470 kΩ HF45 8470 HF45 8470
510 Ω HF45 5510 HF45 5510 560 kΩ HJ35 8560 HF85 8560
560 Ω HF45 5560 HF45 5560 680 kΩ HJ35 8680 HF85 8680
680 Ω HF45 5680 HF45 5680 820 kΩ HJ35 8820 HF85 8820
820 Ω HF45 5820 HF45 5820 1.0 MΩ HF45 9100 HF45 9100
910 Ω HF45 5910 HF45 5910 1.2 MΩ HJ35 9120 ✻
1.0 kΩ HF45 6100 HF45 6100 1.5 MΩ HJ35 9150 HF85 9150
1.2 kΩ HF45 6120 HF45 6120 1.8 MΩ HJ35 9180 HF85 9180
1.5 kΩ HF45 6150 HF45 6150 2.2 MΩ HJ35 9220 HF85 9220
1.8 kΩ HF45 6180 HF45 6180 3.3 MΩ HJ35 9330 HF85 9330
2.0 kΩ HJ35 6200 HF85 6200 3.9 MΩ HJ35 9390 ✻
2.2 kΩ HF45 6220 HF45 6220 4.7 MΩ HJ35 9470 HF85 9470
2.4 kΩ HJ35 6240 HF85 6240
2.7 kΩ HF45 6270 HF45 6270
3.0 kΩ HF45 6300 HF45 6300
1/4W Type
3.3 kΩ HF45 6330 HF45 6330
HF45
3.6 kΩ HJ35 6360 HF85 6360
1/4W Type 1/6W Type
3.9 kΩ HF45 6390 HF45 6390
HJ35 HF85
4.7 kΩ HF45 6470 HF45 6470 10mm
5mm
5.1 kΩ HF45 6510 HF45 6510
5.6 kΩ HF45 6560 HF45 6560
6.8 kΩ HF45 6680 HF45 6680
8.2 kΩ HF45 6820 HF45 6820
9.1 kΩ HF45 6910 HF45 6910
10 kΩ HF45 7100 HF45 7100
❊ : Not available
47
A B C D E F G H I J
A-S201
• OVERALL ASSEMBLY
77 R model
20 35
53
36
35 74
2 73
72
78
1 (5)
72
1 (7) 61
73 73
73
101 72 71
15
3 52
73
32 (2) 77 76 11
76 73
70
70 72
32 (3) 72
70
4 75
1 (6) 54
102 1 (8)
70
70 72
1 (3)
72 70
31 13
5
1 (2)
72
32 (1) 32 (4)
1 (1)
1 (4) 70
50
6 57 62
33
200 57
72
72 72
57
200-1
7 72
48
A-S201
Ref No. Part No. Description Remarks Markets Ref No. Part No. Description Remarks Markets
* 1 ZH174800 P.C.B. ASSEMBLY MAIN R 73 WE774100 BIND HEAD BONDING B-T. SCREW 3x8 MFZN2B3
* 1 ZH174900 P.C.B. ASSEMBLY MAIN T 74 WE877900 BIND HEAD S-TIGHT SCREW 3x6 MFZN2W3 R
* 1 ZH175000 P.C.B. ASSEMBLY MAIN K 75 WE774600 HEXAGONAL HEAD B-TIGHT SCREW 3x18 MFZN2W3
* 1 ZH922600 P.C.B. ASSEMBLY MAIN A 76 WU048900 BIND HEAD S-TIGHT SCREW 4x10 MFZN2W3
* 1 ZH175100 P.C.B. ASSEMBLY MAIN BG 77 VH313200 PW HEAD S-TIGHT SCREW 4x8-10 MFNI3BL BL
* 1 ZH175200 P.C.B. ASSEMBLY MAIN L 77 VD069600 PW HEAD S-TIGHT SCREW 4x8-10 MFNI33 SI
* 11 YF700A00 POWER TRANSFORMER R 78 WE200500 DISH HEAD B-TIGHT SCREW 3x6 MFNI3BL BL
* 11 YF701A00 POWER TRANSFORMER T 78 WE200400 DISH HEAD B-TIGHT SCREW 3x6 MFNI33 SI
* 11 YF702A00 POWER TRANSFORMER K 101 WQ621800 DAMPER 2x10x310
* 11 YF703A00 POWER TRANSFORMER A 102 V5881000 DAMPER 2x15x20
* 11 YF705A00 POWER TRANSFORMER BG
* 11 YF704A00 POWER TRANSFORMER L ACCESSORIES
13 MF118300 FLEXIBLE FLAT CABLE 18P 300mm P=1.25 * 200 ZG936400 REMOTE CONTROL RAS2, 7060N-01-0001
# 15 ZD043300 TRANSISTOR 2STC4468 Q113-116 200-1 AAX13340 BATTERY COVER Black 60050001
20 WY042500 POWER CABLE 1.8m R BATTERY LR6,AA,UM-3 2pcs
20 WY042600 POWER CABLE 1.8m T
20 WY042400 POWER CABLE 1.8m K SERVICE TOOL
20 WY042100 POWER CABLE 1.8m A * ZK189200 RS-232C CONVERSION ADAPTOR V5.0 without FFC
20 WY041100 POWER CABLE 1.8m B ZD896000 FLEXIBLE FLAT CABLE 9P 150mm P=1.25 SMCD-9X150-BDX2
20 WY041700 POWER CABLE 1.8m GL
* 31 ZG936700 FRONT PANEL BL
* 31 ZG936800 FRONT PANEL SI
* 32 ZG937100 BUTTON SET Ax1,Bx1,Cx1,Dx1 BL
* 32 ZG937200 BUTTON SET Ax1,Bx1,Cx1,Dx1 SI
* 33 ZH629500 KNOB VOLUME BL
* 33 ZH629600 KNOB VOLUME SI
* 35 ZG941400 REAR PANEL R
* 35 ZG941500 REAR PANEL T
* 35 ZG941600 REAR PANEL K
* 35 ZG941700 REAR PANEL A
* 35 ZG941900 REAR PANEL BG
* 35 ZG942000 REAR PANEL L
* 36 ZG942200 TOP COVER BL
* 36 ZG942300 TOP COVER SI
* 50 ZG943100 WINDOW SHEET
52 VV849300 RADIATION SHEET 19x24
53 V2438700 CORD STOPPER 10P1
54 WQ664500 SUPPORT H8
57 ZC181800 LEG D60/H21 Black
61 AA627310 GROUND TERMINAL
62 VQ368600 PUSH RIVET P3555-B
70 WE774800 BIND HEAD P-TIGHT SCREW 3x8 MFZN2W3
71 VK173200 SCREW TRANSISTOR 3x15 SP MFC2
72 WE774300 BIND HEAD B-TIGHT SCREW 3x8 MFZN2W3
* New Parts Finish ..... BL: Black color, SI: Silver color * New Parts Finish ..... BL: Black color, SI: Silver color
Note) Those parts marked with “#” are not included in the P.C.B. assembly. 49
A B C D E F G H I J
A-S201
1 ■ REMOTE CONTROL
SCHEMATIC DIAGRAM PANEL KEY NO. LAYOUT KEY CODE
RAS2
4.7 uF/50 V
VCC 10 11 12 10 TUNING 7F01-641B
C1
6 11 BAT
PD2 LED 11 TUNING 7F01-611E
3V
7 10 13 14 15 12 BAND 7A-AE
PD3 VSS
3 13 PRESET 7A-11
8 9
PD4 PD5 14 PRESET 7A-10
16 17 18
15 A/B/C/D/E 7A-12
19 20 21 16 TREBLE – 7A-BAC4
25 1 4 7 10 13 16 19 22 28 17 TREBLE + 7A-B9C7
24 5 8 11 14 17 20 26 22 23 18 MEMORY 7A-AF
19 BASS – 7A-B8C6
3 6 9 12 15 18 21 23 27
24 20 BASS + 7A-B7C9
4 21 INFO 7A-A4
43 40 37 29
25 26 27 22 BALANCE L 7A-BBC5
44 41 38 34 31
23 BALANCE R 7A-BCC2
45 42 39 33 30 28 24 (up) 7A-9D63
25 (left) 7A-9F61
26 ENTER 7A-DE20
29 30
31 27 (right) 7A-9E60
28 (down) 7A-9C62
33
5 29 MENU 7A-847A
34
30 PURE DIRECT 7A-DD23
31 VOLUME + 7A-1AE4
33 MUTE 7A-1CE2
37 38 39
34 VOLUME – 7A-1BE5
37 (stop) 79-56
40 41 42
38 (pause) 79-55
39 (play) 79-02
6 43 44 45
40 DISC SKIP 79-4F
41 (skip-) 79-04
42 (skip+) 79-07
43 (open/close) 79-01
44 (search-) 79-05
45 (search+) 79-06
50
A-S201
■ ADVANCED SETUP
2 Press MENU.
Input selector
buttons
3 Press / to select the desired menu item,
and then press ENTER.
A-S201
4 Press / to change the settings.
/
ENTER
5 To exit the Option menu, press MENU.
MENU
INITIAL VOLUME (INIT VOL) Sets the volume at the time this unit is turned on. When this parameter is set to “OFF”, the
volume level used when this unit was set to standby is applied.
Adjustable range: OFF*, MUTE, 01 to 99, MAX
AUTO POWER STANDBY Sets this unit to standby mode automatically if no operation is performed in the specified time.
(AUTO STBY) Choices: OFF/2H/4H/8H*/12H
51
A-S201