Texas Western
AL Texas Western we are dedicated to quality and customer satisfaction our warranty and
service prove it
IF you want equipment yott ean depend on, our Torque-Tite™ catheads prove the answer.
As original equipment on your new rid or work over unit, or when it comes to replacing worn
cout cathends
Every cathead we manufacture is designed with the following outstanding features. ‘The clutch
linings are impregnated with brass chips to give constant line pull from 100" to 600°
fahrenheit. Stationary sleeves are manufactured from heat treated 4140 alloy steel, All roller
bearing cayes are machined ... not cast ... and rolling elements are heat treated to Re GO+ and
ground.
The main sleeve shaft of the cathead forms the inner race for the roller bearings. It constantly
rotates and should be heat treated... The life of the cathead depends on it. That's why at Texas
Western we induction harden every main sleeve shall we manufacture,
There are three types of To 1e™ catheads Air clutch models 166B Breakout, and 66S
Spinning eathends. Air Actuated models S¢B and 46B Breakout, and S6S and 46S Spinning
Catheads, Manually Actuated models S6SM and 46SM Spinning catheads.
ite™ catheads heavy backup anchors which are titled when tension springs to
All Torque-’
prevent eral
Every Torque-Tite™ cathead is performance tested for proper operation dnd constant line
pull at our factory in Lubbock, Texas.
We know our product and we stand behind it with a warranty that is twice as long as any i the
industry.Pigin
Texas Western —Model 56SA, Air Spin
wwe AareTexas Western —Model 66S, Spinning CatheadTexas Western
..—Modal 1668, Breakout Cathead
‘Shoot, Texas
Ly
HetPagin:
Texas Wester —Model 455M, Mechanical Spinne
bbock Texas
er ye nos Some
VARY M6905
2avagina
Texas Western —Mode! 468, Air Breakout
= hock Texas
Bada nd ay
erate!
2490Texas Westem —Model S68, Air Breako
sieseen
beagoek
g
3
&
8
i
2H