Professional Documents
Culture Documents
F-017-Work at Height Inspection Checklist
F-017-Work at Height Inspection Checklist
2 An established Communication system have been established and explained to the workers
6 Workmen provided with bad / box to carry bolts, nuts and hand tools.
Fabricated made shift arrangements and checked for quality and type of material welding, anchoring
9 etc.
Access / Egress
1 Walkways provided with hand-rails, mid-rail & toe guard ?
2 All chequered plates, gratings properly welded / bolted
3 Are ladders inspected and whether they are maintained in good condition
4 Are ladders spliced
5 Are ladders properly secured to prevent slipping, sliding or falling
6 Do side-rails extend 36" above top of landing
7 Are built ip ladders constructed of sound materials
8 Rungs and cleats not over 12" on center
9 Metal ladders not used aroung\d electrical hazards
10 Proper maintenance and storage
11 Ladders, staircases welded/ bolted properly
12 Any obstruction in the stairs
13 Are landing provided with hand with handrails, knee-rails toe-boards…etc.
Action to be taken :
Page 1 of 2 ABE-HSE-F-17, Rev.00
5 Collected scrap are brought down or lowered down and not dropped from height
P.P.E. & Safety Devices
1 Use of PPE ( below mentioned ) ensured for all workers
2 Safety Hard Hat
3 Safety Footwear
4 Full Body Harness while working should be anchoring
5 Hand Gloves
6 Coverall
7 Goggles
8 Anchoring Point provided at all places of work.
9 Common life-line provided wherever linear movement at height is required
10 Safety nets are in use wherever required
11 Proper fall arrest system is deployed at critical work places.
12 Crawler boards / Safety system for work on fragile roof are used