Professional Documents
Culture Documents
Milroyal B
Milroyal B
Protective Clothing
ALWAYS wear protective clothing, face shield, safety glasses and gloves when working on or
near your metering pump. Additional precautions should be taken depending on the solution
being pumped. Refer to Safety Data Sheets for the solution being pumped.
Hearing Protection
It is recommended that hearing protection be used if the pump is in an environment where the
time - weighted average sound level (TWA) of 85 decibels is exceeded. (as measured on the
A scale - slow response)
Electrical Safety
• Remove power and ensure that it remains OFF while maintaining pump.
• DO NOT FORGET TO CONNECT THE PUMP TO EARTH / GROUND.
• Electric protection of the motor (Thermal protection or by means of fuses) is to correspond
to the rated current indicated on the motor data plate.
Liquid Compatibility
Verify if the materials of construction of the wetted components of your pump are
recommended for the solution (chemical) to be pumped.
Line Depressurization
To reduce the risk of chemical contact during disassembly or maintenance, the suction and
discharge lines should be depressurized before servicing.
LIST OF ILLUSTRATIONS
FIGURE 1. MILROYAL® Disc Diaphragm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
FIGURE 2. Milton Roy Sludge Trap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
FIGURE 3. Typical Sludge Trap Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
FIGURE 4. MILROYAL® B Disc Diaphragm Liquid End Assembly Drawing (C-102-2095-0006) . . . . . . . . . . . . . . 12
FIGURE 4. MILROYAL® B Disc Diaphragm Liquid End Assembly Drawing Continued (C-102-2095-0006) . . . . . 13
FIGURE 5. MILROYAL® C Disc Diaphragm Liquid End Assembly Drawing (C-102-2285-0006) . . . . . . . . . . . . . . 15
FIGURE 5. MILROYAL® C Disc Diaphragm Liquid End Assembly Drawing Continued (C-102-2285-0006) . . . . . 16
Instruction Manual ii
1 Instruction Manual
Instruction Manual 2
3 Instruction Manual
Instruction Manual 4
Instruction Manual 6
7 Instruction Manual
Instruction Manual 8
9 Instruction Manual
Instruction Manual 10
11 Instruction Manual
1970 1950
2000
2090
2040
2080
2030
2020
1930
1920
1930
1950
2010
330
340
1900
2000
Instruction Manual 12
1990
2050
Top View
2920
2430
2212
2920
1995
1990
2242 2920
1992 2250
2212
4070
4074
1991
2242
Detail No. 1
Check Valve Assy. Detail No. 2 Detail No.6
21/2” Dia. Metallic Plgr. Check Valve Check Valve
2210712002 All Plgr. Dia. Except 21/2” 21/2” Dia. Plastic Plgr.
2210264102
2074
050
070 060
2072
040
2071
010
030 2073
020 2076
080
040
010 2060
050
030
020
Detail No. 4*
Detail No. 3*
Detail No. 5* Refill Valve Assy.
Relief Valve Assy.
Air Bleed Valve Assy. 1010017100
101001300X
1010018000
13 Instruction Manual
Instruction Manual 14
3000
2990
1960
2060
2070
1990
2090
2040
2042
480
2020
1930
1920
1930
2025 340
1950
2010
1900
15 Instruction Manual
1996 PLGR
60
1992 10
1990 20
1991
Detail No. 2
Detail No. 1 Check Valve
Check Valve 5/8”, 7/8” and 1/8” Dia. Plgr.
11/2”, 2”, 21/2” and 31/2” Dia. Plgr. 2210263XXY
2074
2072 60
2171
80
2076
40
10
50
30
2073
20
Detail No. 3
Refill Valve Detail No. 4
1010017X00 Air Bleed Valve Assy.
1010018000
Detail No. 5
Relief Valve
4070177XXY
Purchased and No Spare Parts
Instruction Manual 16
Info@miltonroy.com
www.miltonroy.com MILROYAL is a registered trademark of Milton Roy, LLC.
®