ed in a plastic packet inside the oiler. Screw off the oiler tube, slip a hole in the packet with scissors, and then screw the oiler tube tightly in place again. To refill the oiler, replace the old oil packet with a new one, or simply fill the oiler in the usual manner.
IMPORT ANT. Since oil has a
tendency to seep out at screw threads, etc., the can should not be stored horizontally once the bulb has been opened.
The throat plate should occa-
sionally be removed and the teeth of the feed dog brushed clean.
I I
In order to prevent flocking,
the bobbin case and shuttle should also be cleaned when- ever necessary. This should pre- ferably be done whenever you change the colour of thread and fabric.
Changing the light bulb
A projection to lower the lamp is found on the left side of the lamp guard. Lower the lamp and press it inward at the same time as you turn it counter- clockwise.
When inserting a new lamp
bulb, press it into the holder as far as the stop and turn it clock- Wise.