Professional Documents
Culture Documents
Notes1. Rates include (a) Lead up to 100 m for all materials unless otherwise specified. (b) Cost of all materials including cost of water. (c) All lifts for all materials. (d) Mixing of concrete in mixer. (e) Cost of curing. 2. 3. Lead for flagstones shall be measured from the nearest railway station or market place whichever is nearer. (a) Rates for concrete items are for metal other than black trap, basalt or granite. (b) Blasting charges for metal used for concrete items are payable as per item 514 for the quantity required vide Appendix- 1. (c) Extra rate for use of black trap, basalt or granite for concrete items shall be payable as per item 733. 4. The LDPE film, sealing compound and primer shall bear ISI Mark in accordance with Indian Standards Institution (Certification Marks) Act 1952. The pre-cast slabs shall be casted at suitable centralised places using table vibrator and ensuring quality control of concrete and proper curing arrangement. The flexural strength of pre-cast slabs shall be tested in accordance with IS: 10646-1991. Flag stone lining may be done on canals carrying discharge below 3 cumec, if economically feasible. Provision of C.C M15 lining shall be done for canals having discharges 3.0 cumecs and less and depth of water less than 1.0 m . For canals having discharges more than 3.0 cumecs and water depth more than 1.0 m, C.C. 1:2:4 lining shall be provided. Measurements: (a) Dimensions shall be measured correct to the nearest cm. The area shall be calculated in sqm correct to two places of decimal and cubical contents in cum correct to two places of decimal. (b) No deductions shall be made for the following:(i) Volume occupied by reinforcement; and (ii) Opening up to 0.1 sqm in area; 10. The following Indian Standards may be referred to: -
3.
4. 5. 6. 9.
I.S.No. 651-1992 1398-1982 2505-1992 2506-1985 2508-1984 2514-1963 3872-2002 3873-1993 4031-1991 (Part I to XV) 4515-2002 4558-1995 4575-1983 4926-2003 5256-1992 5690-1982 5889-1994 7245-1974 7246-1974 9013-1978 9451-1994
Title Salt glazed stoneware (Reaffirmed2003) pipes and fittings (fifth revision).
Packing paper, water proof, bitumen laminated (first revision) (with amendments 1 to 3) (Reaffirmed 1994). General Requirement for concrete vibrators immersion type (third revision) (Reaffirmed2004) Screed board vibrators. (Reaffirmed2005) Low-density polyethylene films (second revision). (Reaffirmed2003) Concrete vibrating tables. (Reaffirmed2001) Code of Practice for lining of canals with burnt clay tiles. Code of Practice for laying in-situ cement concrete lining on canals (second revision) (Reaffirmed2004) Methods for physical tests for hydraulic cement (first revision) (Reaffirmed2005) Code of Practice for boulder lining for canals. Code of Practice (Reaffirmed2006) for under-drainage of lined canals.
Code of Practice for designs of cross-section of lined canals (with amendments 1 &2). (Reaffirmed2005) Specification for ready mixed concrete (second Revision) Code of practice for sealing joints in concrete lining on canals. (Reaffirmed2003) Guide for laying combination lining for existing unlined canals (with amendment No.1 ). (Reaffirmed2004) Vibratory plate (Reaffirmed2005) compactor (with amendment No.1)
Specification for concrete pavers(Reaffirmed2001). Recommendations for use of table vibrators for consolidating concrete. (Reaffirmed2004) Methods for making, curing & determining compressive strength of accelerated cured concrete test specimens. (Reaffirmed2004) Guide lines for lining of canals in expansive soils. (Reaffirmed2004)
9698-1995 film.
10430-2000 Criteria for Design of Lined Canals and Guidance for Selection of Type of Lining(Reaffirmed2004) 10646-1991 Method of test for determining flexural strength of pre-cast cement concrete slabs for canal lining (Reaffirmed2004) 12379:1988 Code of practice for lining in water courses and field channels.(Reaffirmed 2003) 13143:1991 Specification on joints in concrete lining of canals - sealing compound.(Reaffirmed 2004) 15351-2003 Textiles-Laminated high density polyethylene (HDPE) fabric for canal lining Item No. 2501 Item Excavation in different types of soil and rocks in canal bed and side slopes for lining, sleepers, coping and under drainage arrangement including dressing to the profile and disposal of excavated material with 50 m lead and 1.5 m lift. Tamping in canal bed and sides including saturation up to 30 cm depth for preparation of earthen sub-grade before laying in- situ cement concrete lining. (a) Providing and laying free draining sand below lining in canal bed and side slopes including compaction as per specification. (b) Providing and laying filter materials for drains consisting of sand and gravel of nominal size 10 mm, 20 mm and 40 mm. Providing and fixing in position 15 cm dia salt glazed stone ware pipes IS: 651 grade AA with open joints in longitudinal drain below lining. Unit cum Rate 10% above the rates given in chapter4 Remark
2502
sqm
10.50
2503
cum
105.00
cum
210.00
2504
178.00
Item Providing and laying bitumen laminated waterproof paper I .S: 1398(Type 1 ) over top of drains and sand surface before laying in-situ cement concrete lining. Providing and fixing in position R.C.C. Cylindrical boxes and covers at outlet in longitudinal drains I. S:4558 pre-cast cement concrete 1:2:4 with 12.5 mm graded stone ballast excluding cost of reinforcement but including form work, vibration, finishing, curing etc., complete. (A)Providing and placing in position cement concrete 1:3:6 with 40 mm graded stone ballast for in-situ sleepers including form work, vibration, finishing, curing, cleaning, etc., complete in(a) Canal bed (b) Canal side slopes. (B)Providing and placing in position cement concrete 1:2:4 with 40 mm graded stone ballast for in-situ sleepers including form work, vibration, finishing, curing, cleaning, etc., complete in(a) Canal bed (b) Canal side slopes. (A)Providing and fixing in position R.C.C. Sleepers precast in cement concrete 1:3:6 with 40 mm graded stone ballast fixing in canal side slopes excluding cost of steel but including form work, cleaning, vibration, handling and hoisting etc. , complete.
Unit sqm
Rate 11.90
Remark
2506
cum
3815.00
2507
cum cum
2471.00 2873.00
2508
Item No.
Item (B)Providing and fixing in position R.C.C. Sleepers precast in cement concrete 1:2:4 with 40 mm graded stone ballast fixing in canal side slopes excluding cost of steel but including form work, cleaning, vibration, handling and hoisting etc. , complete. Providing and fixing in position ladder rings I.S. 3873 -2004 of 25 mm dia 2050 mm long MS bars including bending to the required shape smoothening, painting of exposed surface after installation with anticorrosive bituminous paint. (A)Providing and placing in position cement concrete 1:3:6 with 40 mm graded stone ballast for safety ladder IS: 3873 including form work, vibration finishing making 10 mm wide grooves, curing, cleaning etc., complete. (B)Providing and placing in position cement concrete 1:2:4 with 40 mm graded stone ballast for safety ladder IS: 3873 including form work, vibration finishing making 10 mm wide grooves, curing, cleaning etc., complete. (a)Painting top of sleepers with two layers of sealing compound, ISI Mark 5256, first layer at the rate of 1 liter per 2 sqm and second layer at the rate of 1 liter per 4 sqm inclusive of cost of all materials.
Unit cum
Rate 3756.00
Remark
2509
each
373.00
2510
cum
2656.00
cum
3126.00
2511
sqm
65.00
Item No.
Item (b)Painting of vertical faces of insitu cement concrete lining panels with sealing compound ISI Mark -5256 at the rate of 1 liter per 4 sq m inclusive of cost of all materials. (a)Providing and placing in position controlled concrete M15 with 40 mm graded stone ballast for in-situ lining in canal bed including form work for laying in panels, vibration finishing, making grooves as per IS.3873, finishing, curing for 28 days, cleaning etc., complete. (b) Providing and placing in position controlled concrete M15 with 40 mm graded stone ballast for in-situ lining in canal side slopes including form work for laying in panels, screeding the surface of side slopes with winch operated slip form, finishing making grooves as per IS:3873 , finishing, vibration. curing for 28 days by constructing brick masonry drains with weep holes or perforated pipes on the coping at the top of lining or by sprinklers, cleaning etc. complete. (c) Providing and placing in position cement concrete 1:2:4 with 40 mm graded stone ballast for in-situ lining in canal bed including form work for laying in panels, vibration finishing, making grooves as per IS.3873, finishing, curing for 28 days, cleaning etc., complete.
Unit sqm
Rate 28.00
Remark
2512
cum
2766.00
cum
3251.00
cum
2646.00
Item No.
Item (d) Providing and placing in position cement concrete 1:2:4 with 40 mm graded stone ballast for in-situ lining in canal side slopes including form work for laying in panels, screeding the surface of side slopes with winch operated slip form, finishing making grooves as per IS:3873, finishing, vibration. curing for 28 days by constructing brick masonry drains with weep holes or perforated pipes on the coping at the top of lining or by sprinklers, cleaning etc. complete. (A)Providing and placing in position reinforced contolled concrete M15 with 40 mm graded stone ballast for in-situ lining in canal side slopes including form work, for laying in panels, screeding the surface of side slopes with winch operated slip form, finishing, making grooves as per 1S:3873, curing for 28 days by constructing brick masonry drains with weep holes or perforated pipes on the coping at the top of lining or by sprinklers, cleaning etc. complete.
Unit cum
Rate 3175.00
Remark
2513
cum
3864.00
Item No.
Item (B)Providing and placing in position reinforced cement concrete 1:2:4 with 40 mm graded stone ballast for in-situ lining in canal side slopes including form work, for laying in panels, screeding the surface of side slopes with winch operated slip form, finishing, making grooves as per 1S:3873, curing for 28 days by constructing brick masonry drains with weep holes or perforated pipes on the coping at the top of lining or by sprinklers, cleaning etc. complete. Filling contraction joints (grooves) as per IS: 3873 with hot applied sealing compound IS: 5256 including cleaning and washing grooves, painting its inner surfaces with primer IS:3384 at the rate of 1 liter per 4 sqm inclusive of cost of all materials for in-situ concrete lining(a) Groove of 17 mm depth (b) Groove of 20 mm depth (c) Groove o 27 mm depth (d) Groove of 30 mm depth (e) Groove of 33 mm depth Providing and fixing flap valves in drains Providing and fixing in position pressure relief valves of size 150 mm IS: 4558 for outlets in longitudinal drains in canal bed as per specifications inclusive of cost of all materials. Providing and placing in position burnt clay tiles for lining of canal as per IS: 3872 Providing boulder lining for canals as per IS: 4515
Unit cum
Rate 3743.00
Remark
2514
2515 2516
m m m m m each each
2517
Sqm
184.00
2518
Item No.
Item (a) 150 mm thickness (b) 225 mm thickness (C) 300 mm thickness Providing and laying flag stone lining for canals including average 20 mm thick bedding of cement mortar 1:6 including pointing in cement mortar 1:3 striking joints, curing and cleaning etc. complete(a) 20 to 25 mm thick flag stone (b) 30 to 40 mm thick flag stone (c) 40 to 50 mm thick flag stone (a) Providing and fixing in position LDPE film of 150 Micron (0.15 mm), ISI Mark 2508 (Grade 231), including heat-sealed joints at ends as per IS: 9698 (b) Labour only for Item No. 2520 (a) Providing and fixing in position pre-cast concrete slabs for canal lining, pre-cast in M-10 controlled cement concrete with Graded stone ballast of maximum size 20 mm (conforming to IS: 3860) laid over 15mm thick bed of cement mortar 1 :5 and in joints including form work for pre-casting vibration, curing handling, hoisting etc. complete inclusive of cost of mortar: (a) Pre-cast slab of 60 mm thickness (b) Pre-cast slab of 50 mm thickness
Remark
2519
2520
sqm
4.60
2521
sqm sqm
336.00 298.00
Item Providing and fixing in position pre-cast concrete slabs of 30x30x 3 cm size for canal lining in M-15 design mix concrete with graded stone ballast of maximum size 12.5 mm (conforming to IS: 3860)over 12 mm thick bed of cement mortar 1:5 and in joints including form work for precasting, vibration, curing, handling, hoisting etc. complete including of cost of mortar. Fixing in position NP1 & NP2 half round hume pipes for canal lining (for water courses & field channels) including handling. toeing, filling the joints with filler materials and cement mortar 1 :3 curing etc. complete (excluding cost of pipes & collars). (a) 80mmdia(NP1) (b) 100mmdia(NP1) (c)150 mm dia (NP1) (d) 250 mm dia (NP1 ) (e) 300 mm dia(NP1) (f) 350 mm dia (NP1) (g) 400 mm dia (NP1 ) (h) 450 mm dia(NP1) (i) 500.mm dia (NP2) (j) 600 mm dia (NP2) Providing plain cement concrete lining of M-10 grade (1:3:6) with paver machine in bed, side slope and curvature, including batching, mixing transporting, placing, vibrating, inserting PVC, stripes at joints, smooth finishing curing, (P.V.C. strips payable separately.) Including all leads & lifts of all materials. i) Lining in bed, (with water curing)
Unit sqm
Rate 238.00
Remark
2523
m m m m m m m m m m
24.00 24.00 24.00 26.00 34.00 44.00 49.00 63.00 65.00 83.00
2524
cum
2636.00
Item No.
Item ii)Lining on slope and curvature (with membrace curing) Providing plain cement concrete lining of M-15 grade (1:2:4) with paver machine in bed, side slope and curvature, including batching, mixing, transporting, placing, vibrating, inserting PVC, stripes at joints, smooth finishing curing, (P.V.C. strips payable separately.) Including all leads & lifts of all materials. i) Lining in bed, (with water curing) ii)Lining on slope and curvature (with membrace curing) Machanised trimming of the canal section for preparing sub grade for sub laying concrete lining in all sorts of soils and moorum and back filling the over excavated rock section if any with lean concrete including watering and compacting bed and side slope using slope compactors including back filling and dewatering where ever required. Providing and fixing in position P.V.C. strips in panel joints in lining work, using mechanical contrivance, smooth finishing etc. complete. Providing and laying of PVC corrugated perforated pipes conforming IS-9271 with synthetic filter envelope including joints, providing and laying sand filter blanket around the drain pipe including grading and compaction including excavation in soft or ordinary soil etc. complete as per specifications.
Unit cum
Rate 2786.00
Remark
2525
3106.00 3256.00 10.50 Payable for Item No. 2524 & 2525
2526
2527
R.M.
96.00
2528
Item No.
Item (i) 72 mm inner dia / 80 mm outer dia (ii) 88 mm inner dia/100 mm outer dia (iii) 144 mm inner dia/160 mm outer dia (iv) 178 mm inner dia/200 mm outer dia Providing and laying of PVC corrugated perforated pipes conforming IS-9271 with synthetic filter envelope including joints, providing and laying sand filter blanket around the drain pipe including grading and compaction including excavation in hard soil etc. complete as per specification. (i) 72 mm inner dia / 80 mm outer dia (ii) 88 mm inner dia/100 mm outer dia (iii) 144 mm inner dia/160 mm outer dia (iv) 178 mm inner dia/200 mm outer dia Providing and laying of PVC corrugated perforated pipes conforming IS-9271 with synthetic filter envelope including joints, providing and laying sand filter blanker around the drain pipe including grading and compaction including excavation in hard moorum and moorum with boulder etc. complete as per specifications. (i) 72 mm inner dia / 80 mm outer dia (ii) 88 mm inner dia/100 mm outer dia (iii) 144 mm inner dia/160 mm outer dia
Remark
2529
2530
Item No.
Unit meter
Rate 555.00
Remark