Professional Documents
Culture Documents
Option Board
www.lsis.biz
RTC Option
Name and Function of Each Part
RTC
Drive Setup
Hook for fixation
Battery cover
XG5000
Hook for fixation
Diagnosis
Battery specifications
Item Specification
Voltage/Current DC 3V / 220 mA
Warranty period 3 years (ambient temp.)
※ If battery is getting low, main unit cause the warning, ‘battery voltage low warning’.
The user can check it by error LED, flag and error message of XG5000
1/4
RTC Option
How to use
RTC
Economic & standard type (XBC-DxxxE/S(U) doesn’t support RTC function.
If you equip RTC option board, you can use this function for time management of system or error log.
Drive Setup RTC function is executed steadily when power is off or instantaneous power cut status.
XG-PD ▶XG5000>>
1.Click『Online』 >>『PLC Information』
2.Click PLC RTC tap of PLC Information』
XG5000
3. ‘Synchronize PLC with PC clock’ or
4 change the setting value of Time box
Diagnosis and press ‘Send to PLC’
2/4
RTC Option
application in program
RTC
special relay for time data
Drive Setup
Special relay area Data Contents
XG-PD
F053 H0710 10year 07month
3/4
RTC Option
application in program
RTC
Modification of clock data by program
Write clock data to temporary device (P, M, K, L, Z, U, D, R) and turn on/off input
Drive Setup contact point M0100. (If date and day data is not matched, Write is not available.)
XG-PD
XG5000
Diagnosis
area Content
M0010 Month, year
M0011 Hour, date
M0012 Second, minute
M0013 Centaury, day
Number 0 1 2 3 4 5 6
Day Sunday Monday Tuesday Wednesday Thursday Friday Saturday
4/4
Memory Module
Memory Module Specification
RTC
RUN LED
XG-PD
USB 1 : READ mode
XG5000 RS-232C connector 3 : WRITE mode
connector 5 : PADT I/F mode
XG-PD
READ/WRITE
XG5000
Diagnosis
1. From PLC to M2MB
1 : READ mode
1) Set the switch of memory module as “1”
2) Install memory module at the RS-232C port of main unit
- After installation, program and parameter is saved into memory module and READ LED is on
- If Saving program and parameter is complete, READ LED is off
3)Last, Separate memory module from main unit
2/4
Memory Module
How to use memory module
RTC
Memory Module
XG5000 READ
XG-PD
1. From M2MB to XG5000
XG5000 5 : PADT mode
1) Set the switch of memory module as “5”
2) Connect XBO-M2MB to USB port of PC
Diagnosis 3) Select Project open from Memory & click “OK”.
3/4
Memory Module
How to use memory module
RTC
Memory Module
XG5000 write
XG-PD
1. From XG5000 to M2MB
XG5000 5 : PADT mode
1) Set the switch of memory module as “5”
2) Connect XBO-M2MB to USB port of PC
Diagnosis 3) Select Project Write to Memory on XG5000 menu & click “OK”.
4/4
Analog In/Out
Memory Module
Analog Module
XG5000
Diagnosis
1/9
System Proposal
System Component … XGB
RTC
▶ I/O synchronization
Memory Module
Analog Module
XG5000
Diagnosis
3/9
System Proposal
System Component … XGB
RTC
▶ check I/O Parameter
Memory Module
Analog Module
XG5000
Diagnosis
4/9
System Proposal
System Component … XGB
RTC
▶ Register U Device
Memory Module
Analog Module
XG5000
Diagnosis
6/9
System Proposal
System Component … XGB
RTC ▶ Set Analog module parameter
Memory Module
Analog Module
Double Click
XG5000
Diagnosis
7/9
System Proposal
▶ Device Monitoring System Component … XGB
RTC
▶ sample Program
Memory Module
Analog Module
XG5000
Diagnosis
▶ U Device
Analog data Register
A : 2’ position of option board : Ch0
U0A.04 04 : Analog input
06 : Analog output
02 : Ch0
Slot No : 01 Slot
Base No : 0
8/9
System Proposal
▶ special module monitoring
System Component … XGB
RTC
XG5000>>Monitoring
Start monitoring
Memory Module
Analog Module
XG5000
Diagnosis
9/9