Professional Documents
Culture Documents
Automotive Tools and Equipments
Automotive Tools and Equipments
EQUIPMENTS
GROUP 3:
KIARRA
MIKA
EDLOUWIN
NICHOLAS
ERNESTO
ADIE
HAMMERS
1. Ball peen or Engineers hammers
The most common hammer in an
automotive work shop.
2. Soft hammer
This is usually made of brass and plastic,
it is used in place of the ball peen
hammer.
CHISELS
-ARE USED TO CUT THICK METALS
1. Flat chisel
Useful for cutting and chipping metals.
2.Cross-cut chisel
It is use in cases and to use a flat chisel, cross cutchisel is specially
forged to make its cutting edge.
3. Diamond point chisel
It is use for cutting incorners and also narrow groove
4. Half round chisel
Used for cutting half round bottom grooves and for rectifying.
5. Side chisel
This chisel is used for chipping vertical sides of key ways and cotter
slots flats
SCREW DRIVER