This document discusses different types of cables used in networking, including twisted-pair cable, coaxial cable, and fiber-optic cable. It defines twisted-pair cable as copper cabling used for telephone and Ethernet networks that relies on twisted wire pairs to reduce interference. Coaxial cable is described as a copper-cored cable surrounded by heavy shielding. Fiber-optic cable has one or more optical fibers enclosed in a sheath or jacket.
This document discusses different types of cables used in networking, including twisted-pair cable, coaxial cable, and fiber-optic cable. It defines twisted-pair cable as copper cabling used for telephone and Ethernet networks that relies on twisted wire pairs to reduce interference. Coaxial cable is described as a copper-cored cable surrounded by heavy shielding. Fiber-optic cable has one or more optical fibers enclosed in a sheath or jacket.
This document discusses different types of cables used in networking, including twisted-pair cable, coaxial cable, and fiber-optic cable. It defines twisted-pair cable as copper cabling used for telephone and Ethernet networks that relies on twisted wire pairs to reduce interference. Coaxial cable is described as a copper-cored cable surrounded by heavy shielding. Fiber-optic cable has one or more optical fibers enclosed in a sheath or jacket.
set up, it is the collection of components that make up the system. 2. Its can refer to either hardware or software, or the combination of both. 3. Safety precautions when using a ladder 4. Safety rules when working with cables 5. The solvents and glues used with fiber optics are dangerous. You should handle them with extreme care. 6. What are the specific types of tools and chemicals are used when working with fiber-optic cable? 7.It is a type of copper cabling that is used for telephone communications and most Ethernet networks. 8. It is the cable that has two or four pairs of wires. This type of cable relies solely on the cancellation effect produced by the twisted-wire pairs that limits signal degradation caused by electromagnetic interface (EMI) and radio frequency interference (RFI). 9. It is pair of wires forms a circuit that transmits data. 10. Each pair of wire is wrapped in metallic foil to better shield the wires from noise. Four pairs of wires are then wrapped in an overall metallic braid or foil. 11. It reduces electrical noise from within the cable. It also reduces EMI and RFI from outside the cable. 12. It is a copper-cored cable surrounded by a heavy shielding. Coaxial cable is used to connect the computers to the rest of the network. 13. It is a coaxial cable used in networks operating at 10 Mbps, with a maximum length of 500 meters. 14. It is a coaxial cable used in networks operating at 10 Mbps, with a maximum length of 185 meters. 15. It has one or more optical fibers enclosed in a sheath or jacket.