Professional Documents
Culture Documents
NISHIKET KHADKE 24
SHUBHAM SHENOY 61
Guide: SUPRIYA KAMBLE 22
PROF. SEEMA MISHRA PRANALI PEDDELLI 23
Use engineering methodologies for establishment and modification
of relatively easier Monitoring and Controlling methods for any
system.
Design and Implementation of a control system by means of
microController and Wireless networks.
Present the Controlling design of a miniature Manual/Automatic Dam
model as an application of this project.
Identification of Emergency situations and alerting using buzzer
and also via SMS
Controlling the dam functions using mobile phone.
Reducing the cost and also increasing the monitoring quality.
GSM integration in the system
Rundown the uses of manual systems for water
control and management.
Implemented remote
Implemented a system for measuring station in
water environment present of wireless system
monitoring water using for monitoring of water
GSM system. level.
The control mechanism of Measuring units with a
the dam gates were done communication interface so
manually and using that they may be operating
microcontroller. under the control of base
station.
Problems on mechanical The advantages and the
control system was disadvantage of their paper
proposed in their project the water level monitoring
Dam safety management
Observing the safety of dams is one of important measures to
ensure the safety of the dam .
This is an important and indispensable activity in the work and
management of the dam. Computer software plays a vital role in
monitoring the safety of dams.
Many dam owners have developed information systems for the
dam safety management supervision to facilitate management and
analysis of data.
Fujian Electric Power Company in east China has 27 different types
of dam: concrete, earth, arch and embankment dams. All these
dams are deployed in remote rural areas, making it difficult to
manage security information for all dams. It is therefore important
to develop an information system for remote control of the
monitoring system, to collect and to transfer dam safety
monitoring data so that all this.
BLOCK DIAGRAM (ARCHITECTURE)
PROGRAM FLOWCHART
Vibration Sensor:
The Grove - Vibration Sensor (SW-420) is a high sensitivity non-directional
vibration sensor. When the module is stable, the circuit is turned on and the
output is high. When the movement or vibration occurs, the circuit will be
briefly disconnected and output low. At the same time, you can also adjust the
sensitivity according to your own needs. All in all, this is a perfect module for
vibration or tilt sensor.
Features
Non-directional
High sensitivity
Waterproof
Compression resistance
Water Level Sensor:
The water level sensor uses two probes to pass the current flow thought water
and then he that resistance get the water level.
More water conduct the electricity more easily while dry sensor will not conduct
electricity.
This sensor have low power consumption and high sensitivity.
Features:
Working voltage:5v
Working Temprature:10’C~30’C
Weight:30 gm
Servo Motor:
Tiny and lightweight with high output power. Servo can rotate
approximately 180 degrees (90 in each direction), and works just like
the standard kinds but smaller.
You can use any servo code, hardware or library to control these
servos.
Good for beginners who want to make stuff move without building a
motor controller with feedback & gear box, especially since it will fit
in small places.
It comes with a 3 horns (arms) and hardware.
HARDWARES SOFTWARES
ARM7 LPC2148 Microcontroller Proteus 8.1
GSM Module Keil µVision 5
PCB Wizard/Express PCB
LCD Module
RELAY circuit
Servo Motor
SENSORS
Pressure on dam
Earthquake detection