DO'S & DONT'S All worker's T-shirts must be tucked-in pants when entering the plant production area.
Cellphones, watches and other jewelry are
not allowed in the plant production area.
Follow and obey all posted warning and
danger signs. Head caps must be worn upon entering and during the duration of stay in the production area.
Loitering away and far from a workers
designated workplace is not allowed and strictly prohibited.
Foods and bottled drinks are not allowed to be
brought inside the production areas & offices, and only at designated eating places and pantry. Always use the plant comfort rooms for personal necessities as urinating in canals and other areas in the plant is strictly prohibited.
Wash hands before and after eating and
after leaving the comfort rooms.
Anybody under the influence of liquor will
not be allowed entry inside the plant premises. All office machines, i.e. CPU's, fax machines, copiers, printers, etc. must be unplugged from their electrical outlets at the end of each working day.
Avoid stacking palleted materials, film rolls,
finished goods more than 8 feet high.
Rolls being transferred from one place to
another must be secured by a chock, or a stopper or 'kalso' to prevent them from rolling and falling over. Riding and using the jack lifts as transport when transferring goods and materials are not allowed.
Avoid accumulation of trash or waste materials
anywhere inside the production area.
All liquid and resin spills must be removed and
cleaned immediately as this will cause slipping accidents. Workers required to work on heights more than 10 feet high must wear safety harness.
Printing cylinders, impression, nip and idler
rollers must always be handled and lifted by two (2) persons for safety.
Use the handrails and never run when going up
or down the stairs or ladders. Assume all electrical wires and connections are 'live' and always avoid direct contact on any part of the body.
Avoid getting near electrical transformers,
distribution panels, motors and switch gears.
Do not use Gillette/Rubie and 'like' blades for
web cutting. Only use cutters provided for the purpose. No welding & acetylene works inside the plant premises will be started and conducted without a hot work permit being given and issued by the plant Safety Man.
All outside contractors and their workers prior to
start of work must attend a safety orientation on company rules & regulations and must be required to sign a waiver or a statement of undertaking.
Biodegradable and non-biodegradable wastes
segregation must always be practiced and implemented. Littering and spitting are strictly prohibited anywhere inside company premises.
All regular employees and workers must
undergo annual medical examination.
All employees and workers coming from a
sickness leave must present a doctors certificate and a clearance from their immediate supervisor before being allowed to report and resume work. Employees and outside workers reporting for work in shorts and slippers will not be allowed entry inside company premises.
All hand-carried luggage, packages and
backpacks being brought inside and out of company premises will be subjected for inspection.
All employees and workers transferring from one
position to another, or from one department to another must undergo a job orientation seminar to adequately prepare him or her to the new work assignment. Safety helmets must be worn by all motorcycle riders going in or out of company premises.
No other person will be allowed to ride forklifts
other than its assigned and authorized driver.
Use goggles for eye protection when operating
lathe, grinding and cutting machines and equipment. No lifting machines and equipment like forklifts and chain blocks will be operated more than its allowable rated lifting capacity.
Use gloves when working with chemicals, but
remove your gloves before touching any part of your body.
Other issued PPEs must be used for your safety
protection. If accidently splashed with chemical, wash off the chemical immediately.
When working with chemicals, take a bath
and change clothing at the end of each shift. THANK YOU!!!