Professional Documents
Culture Documents
7.18c - Phase 8 - NDT 22 MCQ
7.18c - Phase 8 - NDT 22 MCQ
7.18c
NDT
Phase Test 08
1. A general definition of Non-Destructive Testing
(NDT) for engineering purposes is that it:
C. at 20 x Magnification
3. To internally check a gas turbine engine combustion
chamber for cracks you would normally ...
A. 20 minutes
B. 30 minutes
C. 40 minutes
5. During dye penetrant testing, the part must be ....
A. magnetism.
B. brushing.
C. dipping.
7. During testing, using a typical dye penetrant, it
must remain on the component surface until ...
A. it is completely dry.
B. by paint stripper.
A. all materials.
B. non-porous materials.
C. porous materials.
13. Dye Penetrants are normally classified by ...
A. ferrous metals.
B. non-ferrous metals.
C. any metals.
20. The Magnetic Particle Inspection testing the part
must be demagnetised ...
B. after testing.
C. before testing.
21. A competent level 2 person trained and authorised
in NDT techniques is authorised to set up and calibrate
equipment and ...
A. is portable
THE END