Professional Documents
Culture Documents
.
Main objective.
• The main objective of this project is to design an
automatic system for feeding and temperature
controlling of the chicken hut.
SPECIFIC OBJECTIVES
•Data collection
•Data analysis
•Prototype design
•Simulation
•Report writing
PROPOSED SOLUTION
The system will operate according to farmer
economy, a chicken farmer may put a
daily,weekely or monthly food in a container and
the food will pack it self on a feeding container
every day.
THE BLOCK DIAGRAM OF THE PROPOSED SYSTEM
OPERATION OF THE PROPOSED
SYSTEM
• The system consists of a controller unit which
is the central processing unit for the system; the
control unit receives the signal from the input
devices (camera, temperature sensor, Real Time
Clock and level sensor).
• Real Time Clock will starts count and every six
hours to send signal to the control unity for
processing, finally the output of the control
unity will actuate valves and an electric fan.
COMPONENTS OF BLOCK DIAGRAM
Power supply unit
This provides power to all devices which are connected to the system.
It involves the conversion of A.C to D.C because there devices that
uses DC power supply.
control unit
Here is where all controlling and processing functions are done.
• To balance temperature of the chicken hut.
• Transceiving signal to and from RTC which enable the feeding of
chicken three times in a day without human intervation.
• To open or close the valve to control feeding.
RTC
Real time clock is a device used to program the time the device will
provide the signal to the microcontroller which will help the motor
of feeder to revolve or stop
BLOCK DIAGRAM COMPONENTS (CONT.)
Valves
Close or opens to release chicken food to the feeding
container.
Temperature regulating circuit
It includes sensors and electric fans for regulating
the temperature of the chicken hut.
Sensor
This is level sensor which will send the signal to the
microcontroller when the food is fully in order to
avoid overflow
BLOCK DIAGRAM COMPONENTS (CONT.)
IP Cameras
They receive, send and transfer the picture (video
signal) directly via IP networks, thus enabling the
authorized viewers to see, save and manage the video
through standard infrastructure of IP base network.
SIGNIFICANCE OF THE PROJECT