You are on page 1of 11

TCU configuration

Most-common commands
TCU (traffic control unit)

 To configure TCU you have to have below software's:


1. Free FTP
2. Notepad++
3. Tera term

Please followed Ppt for TCU configuration that already sent


by
Eng. Harsin to make you install software properly .
Access TCU

 Connect TCU via Local Management Terminal


 RJ45 connector to Local Management port

 telnet 192.168.1.1/24
 username: admin
 password: hidden

 TCU prompt
Basic commands

 List all active alarms in the TCU: (OSmon>getalarmlist)


 To see uptime (how long working TCU ) Print uptime for the system:
(OSmon> uptime).
 Reset to default factory setting, all configuration will be erased :
(OSmon>ResetToFactorySetting)
Set time fot TCU : set time :Year(1970->) Mon(1-12) Day(1-31) Hour(0-23) Min(0-
59) Sec(0-59) Msec(0-999) : (settime 2011 6 15 24 00 00 000)
Ping : to oss ip, ftp, ME Router, NWIE and PGW
Getting TCU logs

Example:

log clear

traceallmoattributeinlog

log read
Software upgrade commands

 Deleteaimo =>ok=>OperationSucceeded
 Startswsession 1 =>ok=>OperationSucceeded
 Uselocalsftp on ( by default off ) =>ok=>OperationSucceeded
 Downloadsw 1 sftp://tcu:tcu@192.168.1.2/Tcu02_sw.tar
=>ok=>OperationSucceeded
 Getswsessionstatus 1 =>ok=>OperationSucceeded
Download in progress
Getswsessionstatus 1 ( apply command again until get downloadcompleted )
Software upgrade commands

 Activatesw 1 =>ok=>OperationSucceeded

 Endswsession 1
Backup script form TCU to PC

 OSmon> uselocalsftp on OperationSucceeded


 OSmon> startsession bkp OperationFailed - Session 'bkp' already started
 OSmon> endsession bkp
 OperationSucceeded
 OSmon> startsession bkp OperationSucceeded
 OSmon> backup bkp sftp://tcu:tcu@192.168.1.2/tcufilename.xml admin
OperationSucceeded
 OSmon> getsessionstatus bkp UploadCompleted OperationSucceeded OSmon>
endsession bkp OperationSucceeded
Restore file script form Pc to TCU

 OSmon> startsession res OperationSucceeded


 OSmon> download res sftp://tcu:tcu@192.168.1.2/filename.xml
OperationSucceeded
 OSmon> getsessionstatus res DownloadCompleted OperationSucceeded
 OSmon> restore res tcu OperationSucceeded
 OSmon> getsessionstatus res ActivationCompleted OperationSucceeded
OperationSucceeded
 OSmon> activate res OperationSucceeded
Finally commands
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

Thank you
Prepared by // Eng. Muhanad Musa
Eng. Harsin Osman

You might also like