ID: 191-15- Rahman Konik Swapnil 2475 ID: 191-15-2626 ID: 191-15-2426 PROJECT NAME- LED LAMP CIRCUIT USING USB PORT Led lamp circuit using usb port: This is a simple USB LED Light circuit. It may be used as emergency light and also as a reading lamp. LED light is a very necessary thing in our life. We are using Breadbroad, Arduino board, Resistor, LED lights, USB cable , Switch, Wires for completing this project . The description of different hardware of the circuit is given bellow in the next slide. PROJECT TINKERCAD SCREEN SHOT:-
When switch off When switch
on ARDUINO BOARD Arduino is an open-source electronics platform based on easy-to-use hardware and software. Arduino boards are able to read inputs - light on a sensor, a finger on a button, or a Twitter message - and turn it into an output - activating a motor, turning on an LED, publishing something online. BREADBOARD A breadboard is a construction base for prototyping of electronics. This makes it easy to use for creating temporary prototypes and experimenting with circuit design. For this reason, solderless breadboards are also popular with students and in technological education. RESISTER A resistors a passive two-terminal electrical component that implements electrical resistances a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses. LED light switch Wire THANK YOU