The document discusses a presentation on automating the filling of polymer balls. It provides background on the company ARM Manufacturing Corp, which manufactures plastic parts. It then describes a new project to create an automatic system for filling hoppers on plastic molding machines, which were previously filled manually. The system uses proximity sensors, a motor pump, ultrasonic sensors, and a microcontroller to automatically fill the hoppers and stop the pump once maximum level is reached. The presentation concludes that knowledge was gained about manufacturing processes, electronic components, and assembly lines through this project.
The document discusses a presentation on automating the filling of polymer balls. It provides background on the company ARM Manufacturing Corp, which manufactures plastic parts. It then describes a new project to create an automatic system for filling hoppers on plastic molding machines, which were previously filled manually. The system uses proximity sensors, a motor pump, ultrasonic sensors, and a microcontroller to automatically fill the hoppers and stop the pump once maximum level is reached. The presentation concludes that knowledge was gained about manufacturing processes, electronic components, and assembly lines through this project.
The document discusses a presentation on automating the filling of polymer balls. It provides background on the company ARM Manufacturing Corp, which manufactures plastic parts. It then describes a new project to create an automatic system for filling hoppers on plastic molding machines, which were previously filled manually. The system uses proximity sensors, a motor pump, ultrasonic sensors, and a microcontroller to automatically fill the hoppers and stop the pump once maximum level is reached. The presentation concludes that knowledge was gained about manufacturing processes, electronic components, and assembly lines through this project.
ARM manufacturing corp. is owned by Mr. Rakesh Shined (CEO)
Arm Manufacturing Corporation Was Established In 2009 with 30+ Employee and We Are the Manufacturer of Motar Vehicle Plastic Part, Plastic Frame, Plastic Light Frame, Heavy Motar Vehicle Plastic Part, Electric Motor Vehicle Plastic Parts. Arm manufacturing is a privately owned, focused engineering enterprise with world class capabilities spanning the entire value chain. We operate an integrated business model comprising the full range of plastic moulding services delivering single-source solutions for some of the prestigious public and private organisations VISION We Endeavors to recognized globally for outstanding education and research leading to well qualified who are innovative entrepreneurial and successful in advanced field of mechanical engineering to cater changing industrial demand and social needs. INFORMATION ABOUT PROJECT:-AUTOMATION OF POLYMER BALLS FILLINGS
As our industry had another issue where the hoppers of
the plastic moulding machine where filled manually. So they gave us a new project as to make a automatic system of the polymer ball filling in the hopper. The problem faced by the industry are their production line used to get disturbed as they run out of polymer ball so they use to take approximately 3 hour to remove the air in the system and So we thought and designed a system which basically an proximity sensors , motor pump , ultra sonic sensor , safety switch and some micro controller pump will transport the hopper and after it reaches the maximum level the motor will stop the system CONCLUSION
Various manufacturing processes were
observed and practised. Knowledge about electronic components was gained. Also got familiar with manufacturing and assembly line THANK YOU