Professional Documents
Culture Documents
400kv Final PPT by Mayank
400kv Final PPT by Mayank
Presentation
AT
400/220/132KV SUB-STATION,SULTANPUR
Mayank mishra
EE-final year
0906520016
INTRODUCTION
ELECTRICAL SUB-STATIONS
Electric power is generated in Generating Stations. The voltage at which the
power is generated in generating stations lies between 11KV to 33KV. This voltage is
not suitable for bulk power transmission over long distances as it results in increased
transmission line losses.
For reduces these losses the generated terminal voltage is stepped up to
Transmission Voltage (Say, 132K.V./ 220 K.V. /400 K.V. and 765kv).
Sultanpur UPPCL substion
Transformer :-
Substation bus (rigid or strain bus) :-
Switches (Vertical, side, center, double, etc. break):-
Switchgear :-
Bus Support Insulators :-
Suspension insulators :-
Wave Trapper:-
Lightning Arresters :-
Circuit Breakers :-
Isolators:-
Current transformers:-
Potential Transformers:-
Capacitors Bank:-
Other :-
TRANSFORMER
A transformer is a device that transfers electrical energy from one circuit to
another through inductively coupled conductor-the transformer coils. A varying current
in the first or primary winding creates a varying magnetic field through the secondary
winding. The varying magnetic field induces a varying electromotive force (EMF)or
voltage in the secondary winding . this effect is called mutual induction.The rating of
transformer is 240MVA which installed in 400kv switchyard which converted to 400kv
into 220kv.
H.V bushing C.T
Conservator tank
Cooling
system
ONAN
L.V bushing CTs
COOLING FANS
Purpose of earthing……
Safety of the living beings around the vicinty of the substation
Proper functioning of the protection system under fault condition
To limit the touch and step potential within tolerable limits
Thank
you