1. The document describes a dual plate concept with a lateral and medial plate for fixation.
2. Key features include a conical threaded hole, dynamic compression hole, and center-to-center distance of 3mm in the lateral plate's "combi hole".
3. The medial plate has 6 screw holes on each side that are 3.5mm in diameter and do not intersect each other or the femur implant surface.
1. The document describes a dual plate concept with a lateral and medial plate for fixation.
2. Key features include a conical threaded hole, dynamic compression hole, and center-to-center distance of 3mm in the lateral plate's "combi hole".
3. The medial plate has 6 screw holes on each side that are 3.5mm in diameter and do not intersect each other or the femur implant surface.
1. The document describes a dual plate concept with a lateral and medial plate for fixation.
2. Key features include a conical threaded hole, dynamic compression hole, and center-to-center distance of 3mm in the lateral plate's "combi hole".
3. The medial plate has 6 screw holes on each side that are 3.5mm in diameter and do not intersect each other or the femur implant surface.
1. The document describes a dual plate concept with a lateral and medial plate for fixation.
2. Key features include a conical threaded hole, dynamic compression hole, and center-to-center distance of 3mm in the lateral plate's "combi hole".
3. The medial plate has 6 screw holes on each side that are 3.5mm in diameter and do not intersect each other or the femur implant surface.
dia 3.9mm(top), Tapered, tapped with 0.5mm pitch 2. Dynamic compression hole: dia 4mm (bottom), 1mm thickness with uniform dia, dia 4.6mm (top), tapered for 2mm length Plate extended in the 3. Centre to centre distance is 3mm distal Medial plate
4.5mm dia (3 holes)
Screw no. 3 hole Not interfering with
provided in box (PS) & pegs (CR) previous concept has been removed to accommodate combi hole
Plate extended in the
distal PS component CR component 1. 3.5mm dia screw holes, Medial plate total 6 on each side(lateral Lateral plate & medial). 2. Non intersecting with each other 3. Parallel to femur implant surface. Inclined holes (of 4.5mm dia) are interfering with screw holes created in the distal side of plate