Professional Documents
Culture Documents
D85EX-15 Monitor Panel
D85EX-15 Monitor Panel
Bulldozers
Monitor Panel
D85EX/PX-15
Komatsu D65EX/PX-15
Bulldozers
MN20030410
NEXT MENU
Electronic Monitor Panel
Display A
(Speed range, Engine speed) Water temp' Hydraulic oil temp'
TACHOMETER
Fuel gauge
MACHINE
DIRECTION T/M SPEED
Starting switch
Auto shift down
switch
Buzzer cancel
Pre-set mode switch
switch 1
1
< >
Buzzer cancel SW
SELECT CANCEL
1
DISPLAY Display B
Display A
[◇]
Information SW
Service Mode
Screen returns
Buzzer cancel SW Execute mode
[◇]
Buzzer cancel
Information SW SW
Service SW
ON
OFF
Information Buzzer cancel
MESSAGE BLOCK
SW SW
32542.0h
E03+CALL “E03” ALERTS SERIOUS TROUBLE. MOVE THE MACHINE SAFE AREA
32542.0h AND SERVICE.
Buzzer cancel
ITEM CHANGED HISTORY SW
> >
< <
2-PM CLINIC
ASSIST MODE Information
SW
<
>
< >
> <
>
02-BOOST PRESSURE
<
25.4kpa
- FAULT CODE -
DB10KK
2sec 2sec
- FAULT CODE -
AD10MA
2sec
Buzzer cancel
SCROLL ITEM WITH CURSOR SW.
SW
SELECT ITEM WITH SELECT SW.
<
< >
Display in Service mode
3. SERVICE INFORMATION MODE
3-1. THIS MODE CHANGES SPAN OF 3-2. THIS MODE DISPLAYS 3-3. THIS MODE DISPLAYS
OIL OR FILTER EXCHANGE ELECTRICAL FAULT CODE. MACHINE FAULT CODE.
INTERVAL. ( INCLUDE HISTORY ) ( INCLUDE HISTORY )
5-EXCHG. INTVAL. < 6-ELEC.FAULT < 7-MACHINE FAULT
SET MODE > CODE MODE > CODE MODE
STANDARD MODE
2.5 SEC +
< > 32542.0h < >
SERVICE SW
3-6. THIS MODE DISPLAYS SENSOR 3-5. THIS MODE DISPLAYS LOAD 3-4. THIS MODE CHANGES SOME
MEMORIES OF MACHINE.
INFORMATION FOR TROUBLE MACHINE PARAMETER OR
SHOOTING. ( VOLTAGE, CURRENT, MODE SELECTION.
PRESSURE, SPEED, TEMPERAT
URE )
3-7. THIS MODE 2 MONITORED Service SW
11-DUAL DISPLAY
MONITORING MODE CAN BE DISPLAYED
SIMULATANEOUSLY.
3-1. EXCHANGE INTERVAL MODE
THIS MODE CHANGES SPAN OF OIL OR FILTER EXCHANGE
5-EXCHG. INTVAL.
SET MODE
SCROLL ITEM WITH CURSOR SW.
SELECT ITEM WITH SELECT SW.
> >
< <
ITEM
EXCHANGE INTERVAL(DEFAULT )
ADJUST WITH CURSOR AND SHIFT UP/DOWN SW. 1ST 2ND ~
ENGINE OIL 500H
500H
ENGINE OIL FILTER 500H 500H
FUEL FILTER 500H 500H
CORROSION FILTER 1000H 1000H
P/L OIL 1000H 1000H
↑ P/L OIL FILTER 500H 500H
> > HYDRAULIC OIL 250H 2000H
HYDRAULIC OIL FILTER 250H 2000H
↓ DAMPER OIL 2000H 2000H
F/D OIL 250H 2000H
Abnormality
Abnormality Method of displaying abnormality
Abnormality Remed
Code.
code Display Caution Buzzer
Backup alarm does not sound The automatic function stop and
E01 〇 some functions stop, but it is
Fan rotation is too fast. still possible to carry out
operation
Please contact your Komatsu
distributor immediately for repairs.
・Does not shift up or shift down If user stops engine and then
E02 〇 〇 〇 starts again, operations are
possible without limit functions.
However, user must be careful.
Please contact your Komatsu
distributor immediately for repairs.
・Number of speed ranges that
can be used is limited. Move machine to a safe place.
・Engine does not run at full then contact your Komatsu
speed. distributor immediately for repairs.
CALL E03 〇 〇 〇 ・Excessive shock when shifting
gear.
・Turning ability becomes poor
・Excessive braking shock.
・Abnormality in engine water
temperature sensor.
・Engine control impossible. Stop machine, then contact your
CALL E04 〇 〇 〇 ・Travel impossible. Komatsu distributor immediately
・Machine does not stop. forforrep
repairs. a
3-2. ELECTRICAL FAULT DISPLAY MODE
THIS MODE DISPLAYS ELECTRICAL FAULT CODE.
6-ELEC.FAULT
CODE MODE
Information
SW
Buzzer cancel
Service SW SW
OCCURRENCE
FAULT CODE ACTIVE OR NOT INDICATE
> >
< <
IS OPEN
1380MW LOCK-UP CLUTCH HAS TROUBLES
etc.
How to check error code. (EE)
* Electric system error code display mode. ①
In this mode, you can check the past electric system error codes.
1. Parking lever "ON". Key switch "ON" .
2. Turn buzzer cancel SW to [◇] and service SW "ON" for 3 seconds. ②
Display B shows ①.
3. Turn information SW ( > ) for one time.
Display B shows ②.
4. Set buzzer cancel SW in the [◇] position ③
Display A shows "EE". Display B shows ③ or ④
Display in the case where no codes are recorded.
If no error codes have been output up to now, Error code
(Code being output Number of past
the display B displays as shown at right ③. Record No.(Up to 20) occurrences
currently is flashing)
* Display in the case where 1 or more codes are recorded.
If any error code has been output up to now,
the display B displays as shown at right. --- ④. ④
★: Flashing and lighting of error code.
Flashing: Code is being output currently.
Lighting: Code is not being output currently.
★: Operation to take when multiple codes are recorded. Time measured by service meter Time measured by service meter
When multiple codes are recorded, they can be displayed after first occurrence after last occurrence
one by one by operating information SW.
・ ( > ) : Next code.
・ ( < ) : Previous code. Display A
★: Method of deleting error code.
While a error code to be deleted, operate shift-up button or shift-down button.
Display B
・ [UP] or [DOWN]: Delete error code.
* A error code which is being output currently (which is flashing) cannot be deleted.
3-3. MACHINE FAULT DISPLAY MODE
THIS MODE DISPLAYS MACHINE FAULT CODE.
( ACTIVATE CAUTION IS RECORDS AS MACHINE FAULT CODE )
7-MACHINE FAULT
CODE MODE
Information
SW
Buzzer cancel
OCCURRENCE Service SW SW
FAULT CODE ACTIVE OR NOT INDICATE
> >
< <
8-SERVICE ADJUST
MODE Information
SW
Buzzer cancel
SW
< > Service SW
CURSOR ITEM ( EX. )
UP CONTROLLER ADJUSTMENT
MACHINE SPECIFICATION SET
BRAKE POTENTIO ADJUST SET
DOWN HSS NEUTRAL ADJUST
SELECT ITEM WITH SELECT SW. MACHINE PITCH ANGLE SENSOR ADJUST
CYLINDER CUT-OUT
etc.
How to adjust Steering controller specification set.
・ This code(0002) is used to initialized the specification codes recognized by
the steering controller and the set values of the memory in the controller.
・ The specification code is displayed on the lower line. ①
* Adjustment method ( HSS specification )
1. Parking lever "ON". Key switch "ON" .
2. Turn buzzer cancel SW to [◇] and service SW "ON" for 3 seconds. ②
Display B shows ①.
3. Turn information SW ( > ) for three times.
Display B shows ②.
4. Set buzzer cancel SW in the [◇] position ③
Display A shows "Cb". Display B shows ③.
5. Set the information SW ( > ) three times.
Press the shift-up button two times. ④ 2
Display B shows ④ .
6. Set buzzer cancel SW in the [◇] position
Display B shows ⑤ . ⑤
7. Set buzzer cancel SW in the [◇] position 4 4 4
and check that the caution buzzer sounds.
8. Check that the displayed specification code has changed from [4*4] to [444].
* If specification code [444] is not displayed, the controller wiring harness or Display A
the controller unit may be defective.
* Even if this code is turned off the setting is effective.
9. Turn buzzer cancel SW to [□] until display B show normal condition.
Display B
How to adjust Machine specification set.
・ This code(0004) is used to have the machine specification recognized by
the controllers which compose the system.
・ The machine specification code is displayed on the lower line. (Display
B)
①
・ Adjustment method ( HSS specification )
* Since this code is reset when "Transmission controller specification set“
is executed, adjust it after that.
1. Parking lever "ON". Key switch "ON" . ②
2. Turn buzzer cancel SW to [◇] and service SW "ON" for 3 seconds.
Display B shows ①.
3. Turn information SW ( > ) for three times. ③
Display B shows ②.
4. Set buzzer cancel SW in the [◇] position
Display A shows "Cb". Display B shows ③. ④ 44
5. Turn information SW ( > ) three times.
Press the shift-up button four times.
Display B shows ④. ⑤
6. Set buzzer cancel SW in the [◇] position
0
Display B shows ⑤.
7. Select the code of the machine specification by shift-up button.
8. Set buzzer cancel SW in the [◇] position No Specification Display A
and check that caution buzzer sounds.
000 STD
* Be sure to match the setting to
the machine specification. 080 Cold spec Display B
* Even if this code is turned off the setting
is effective.
9. Turn buzzer cancel SW to [□] until display B shows normal condition.
3-5. MACHINE LOAD MEMORY DISPLAY MODE
THIS MODE DISPLAYS LOAD MEMORIES OF MACHINE.
9-LOAD MEMORY
DISPLAY MODE
< <
VALUE
Information
SW
Buzzer cancel
SW
Service SW
3-6. SERVICE MONITORING MODE
THIS MODE DISPLAYS SENSOR INFORMATION FOR TROUBLE SHOOTING.
10-REAL TIME
MONITORING MODE
00000 ↓
< >
CURSOR
UP
DOWN
ENGINE SPEED
LEVER POTENTIO VOLTAGE
HYDRAULIC PRESSURE
HYDRAULIC TEMPERATURE
HOLD DISPLAY WITH SELECT SW. COOLANT TEMPERATURE
P/L OIL TEMPERATURE
ECMV SOLENOID CURRENT
TRIGGER SW CONDITION
CONTROLLER VERSION
etc.
FLICKER HOLD MODE
Display A
Dual display monitoring mode
In this mode, 2 monitored items can be displayed
simultaneously.
1. Selecting and executing mode Display B
1. Select “Dual display monitoring mode” on the display A.
If the mode selected, code “dR” is displayed display A.
and title is displayed display B.
2. Display the monitoring code input display B by buzzer
cancel switch and shift-up or shift down button.
2. Selecting and entering monitored items.