Professional Documents
Culture Documents
Drummond Operations: Fork Inspection
Drummond Operations: Fork Inspection
FORK INSPECTION
In an audit carried out by the client, a bad practice is evidenced when replacing the fork support bushings.
Cracks.
Check visually inner heel and top and bottom hook areas to detect possible cracks. Apply non-destructive crack detection tests if necessary. If surface
cracks are detected, forks should be withdrawn from service.
The fork shall thoroughly visually examine for cracks, and subject them to a non-destructive crack detection process with special attention being given to
the heel and any welds and heat-affected zones at the top and bottom hooks, including their attachment to the shank. The fork arm shall be withdrawn if
indications of cracking are detected.
It is recommended that the non-destructive crack detection process be carried out by the magnetic particle inspection method.
It has a crack in the weld joint between the support bushing and the fork..
Shaft Pallet Fork LH , presents a crack in the body of the structure, at the level of the 90 degree radius
THANK YOU
TU ALIADO MINERO