Professional Documents
Culture Documents
1 de 15
AUCTION PACKAGE UFN-V
AUCTION PACKAGE
UFN-V
SPECIFICATION OF EQUIPMENT AND MATERIALS FOLHA
2 de 15
AUCTION PACKAGE UFN-V
INDEX
1. OBJECTIVE .................................................................................................................................................... 3
2. STORAGE SPHERE - EF-6351001A/B ......................................................................................................... 3
3. STORAGE TANK - TQ-6351001 ................................................................................................................... 4
4. INPUT TRANSFORMER - TF-5142001 ........................................................................................................ 5
5. DRAIN PUMP – B-5121010 ........................................................................................................................... 6
6. SEWAGE PUMP - B-5312002A/B ................................................................................................................. 6
7. BAG FILTER - FT-5128001 A/B ................................................................................................................... 6
8. OIL/WATER SEPARATOR - SAO-5334001 ................................................................................................ 7
9. OVERHEAD TRAVELLER CRANE - TN-8224001 .................................................................................... 8
10. SULFURIC ACID STORAGE TANK - TQ-5128007 .................................................................................. 10
11. FUEL GAS BUFFER DRUM - V-5135002 .................................................................................................. 11
12. COMPRESSED AIR RECEIVER VESSEL - V-5136001............................................................................ 11
13. INSTRUMENT AIR RECEIVER VESSEL- V-5136002 ............................................................................. 12
14. AMMONIA FLARE KNOCK OUT DRUM - V-5412002 ........................................................................... 12
15. REFORMED GAS KNOCK OUT DRUM - V-5412003.............................................................................. 13
16. AMMONIA DRAIN DRUM - V-6351001 ................................................................................................... 13
17. POLYMER DOSING SYSTEM FOR CENTRIFUGAL – B-Z-5121003 .................................................... 14
18. POLYMER DOSING SYSTEM FOR GROSS WATER – B-Z-5121007 .................................................... 14
19. SPOOLS OF CARBON STEEL PIPES IN SEVERAL ASSEMBLED PARTS .......................................... 14
20. PREDIAL METALLIC STRUCTURE IN VARIOUS ASSEMBLED PARTS ........................................... 15
21. PIPE-RACK METALLIC STRUCTURE IN VARIOUS ASSEMBLED PARTS ....................................... 15
SPECIFICATION OF EQUIPMENT AND MATERIALS FOLHA
3 de 15
AUCTION PACKAGE UFN-V
1. OBJECTIVE
This Specification of Equipment and Materials aims to present the main information regarding equipment that
is part of the specification package resulting from the discontinuation of the UFN-V project.
91% (ninety-one percent) of the structure of 2 (two) spheres, manufactured by PARESA (Italy), designed
according to ASME VIII Div.2, SA537 Cl.1 steel with the following main characteristics:
a. Nominal capacity of 3882 m³ (each)
b. Design Fluid: Ammonia
c. Minimum Design Temperature of -33 ° C and Maximum of 70 ° C
d. Minimum Design Pressure of Total Vacuum up to a maximum of 17 kg / cm²g
e. Corrosion Allowance of 1.6 mm
f. Main Nozzles: 8" inlet and 16" outlet
They are accompanied by the following items and accessories:
Item Descrição do Material Quantidade Unid.
1 BOLTS M20 X 160 + NUTS + WASHER 88 NR
2 COLUMS 22 NR
3 COTTER PIN Ø 8 X 160 176 NR
4 PLATE thk 15 mm 155 X 155 22 NR
5 PLATES thk 12 mm 44 NR
6 ROD BAR Ø 30 mm L=150 44 NR
7 ROD BAR Ø 30 mm L=595 44 NR
8 ROD BAR Ø 35 mm 88 NR
9 SHELL PLATE thk 43,5 TOP LATERAL 4 NR
10 SHELL PLATE thk 46 BOTTOM LATERAL 4 NR
11 SHELL PLATE thk 46 BOTTOM PERIPHERIQUE 8 NR
12 SHELL PLATES thk 43,5 TOP PERIPHERIQUE 8 NR
13 SHELL PLATES thk 45 TROPICAL 44 NR
14 SHELL PLATES thk 46 EQUATORIAL 44 NR
15 TURNBUCKLES M30 44 NR
16 WASHER thk 5 mm 176 NR
SPECIFICATION OF EQUIPMENT AND MATERIALS FOLHA
4 de 15
AUCTION PACKAGE UFN-V
94% (ninety-four percent) of the structure of 1 (one) double-side fixed roof tank, manufactured by PARESA
(Italy), designed according to API 620, in SA537 Cl.1 steel with the following main characteristics:
a. Net capacity of 29,663 m³ (each)
b. Diameter of inner tank of 40,700mm and external of 42,700mm
c. Design Fluid: Ammonia
d. Minimum Design Temperature of -35 ° C and Maximum of 70 ° C
e. Minimum Design Pressure of -0.005kg / cm²g to the maximum of 0.15kg / cm²g
f. Main nozzles: 8 "input and 12" output
It is accompanied by the following items and accessories:
Item Descrição do Material Quantidade Unid.
1 (one) power transformer, manufactured by SCHNEIDER ELECTRIC (India), type IEC 600760, 3 phases,
60Hz, sealed with naphthenic mineral oil, tap changer, with the following main characteristics:
a. Rated Power of 30,000kVA (Natural Cooling) and 36,000kVA (Forced Cooling)
b. Primary winding: Voltage 138kV, delta connection
c. Secondary winding: 13.8kV, star connection
It is accompanied by the following items and accessories:
Item Descrição do Material Quantidade Unid.
1 Main conservator pallet 1 Pç
2 Roller Case (4x1) 1 Pç
3 Instrument Case 1 Pç
4 Pipes & Supports case 1 Pç
5 Fan & Fan support case 1 Pç
6 HV Bushing Case 3 Pç
7 Radiator case (2x1) 4 Pç
SPECIFICATION OF EQUIPMENT AND MATERIALS FOLHA
6 de 15
AUCTION PACKAGE UFN-V
1 (one) submersible pump, manufactured by KSB Hydraulic Pumps, model KRT S40-160, steel A 48 CL35,
for rainwater drainage, flow of 10m³/h (continuous minimum flow of 2m³/h), discharge pressure 1,43
kgf/cm²man, NSPH available 9,0m (submersed), intermittent working regime, 3500 RPM, driven by electric
motor of 1,5kW, 440V, 60Hz, 3 phases, direct starting.
It is accompanied by the following items and accessories:
Item Descrição do Material Qtd Receb. Unid.
2 (two) submersible pumps, manufactured by KSB Hydraulic Pumps, model KRT F40-160, steel A 48 CL35,
for sewage effluents, flow of 2.5m³/h (continuous minimum flow of 2m³/h), discharge pressure 2.0kgf/cm²man,
NSPH available 9.0m (submersed), intermittent working regime, 3500 RPM, driven by electric motor of 2.2kW,
440V, 60Hz, 3 phases, direct starting.
It is accompanied by the following items and accessories:
Item Descrição do Material Qtd Receb. Unid.
2 (two) bag filters for dechlorinated water filtration, flow rate of 190 m³/h, maximum operating pressure of 5.7
kgf/cm²(g), vessel according to ASME VIII Div.1, steel SA-240-304- L, bag element in 20 micron needled
polypropylene felt.
They are accompanied by the following items and accessories:
Item Descrição do Material Qtd Receb. Unid.
1 ARRUELA DA BASE CH. 16MM - POS: 8 12,00 PÇ
2 ANEL DO GABARITO CH. 9,5MM - POS: 15 1,00 PÇ
3 JUNTA PLANA ASME B16.20 Ø 692 X 580 X 3,2MM 2,00 PÇ
4 ESTOJO Ø 1.1/4" X 8" UN-2A 4,00 PÇ
SPECIFICATION OF EQUIPMENT AND MATERIALS FOLHA
7 de 15
AUCTION PACKAGE UFN-V
1 (one) Oil/Water Separator (SAO) of coalescing plates, manufactured by Alfamec Soluções Ambientais,
model SAO 25 / RV 7746, with a maximum flow of 25 m³/h and a minimum of 10m³/h for suspended solids
treatment up to 100 mg/l, fed by gravity generating a treated effluent with oil content lower than 20 mg/l,
suspended solids lower than 30mg/l and pH between 6.0 and 8.0. The SAO hull is made of ASTM A36 steel,
measuring (4.000x1.160) mm, with height of 1,200mm.
It is accompanied by the following items and accessories:
Item Descrição do Material Qtd Receb. Unid.
1 REFORÇO A-36 VIGA U 3" X 1A X 6000 4,00 PÇ
2 FLANGE A-105 6" ASME B16.5 5-150 LBS 2,00 PÇ
3 MEIA LUVA A-105 1.1/2" BSP-3000 LBS 2,00 PÇ
4 MEIA LUVA A-105 1" BSP-3000 LBS 1,00 PÇ
5 TUBO A-106B 1" SCH 40 X 750MM 1,00 PÇ
6 OLHAL A-36 CH. 1/2" X 50 X 75 4,00 PÇ
7 ATERRAMENTO INOX 304 CH.1/4" X 50 X 50 1,00 PÇ
8 FUSO INOX 304 M6 X 15 6,00 PÇ
9 PORCA SEXTAVADA INOX 304 M6 6,00 PÇ
10 PORCA SEXTAVADA INOX 304 M10 7,00 PÇ
11 PORCA INTERNA A-36 DISCO 156 X 1.1/4" 1,00 PÇ
12 TUBO INOX 304 4" SCH 40S X 335 1,00 PÇ
13 ALÇA INOX 304 TREF 3/8" X 750 1,00 PÇ
14 TUBO INOX 304 3" SCH 40S X 115 1,00 PÇ
15 PORCA INTERNA A-36 DISCO 85 X 1/2" 1,00 PÇ
16 TUBO CONEXÃO A-106B 6" SCH 40 X 600 1,00 PÇ
17 REFORÇO A-36 CH 3/16" X 1A X 1000 2,00 PÇ
SPECIFICATION OF EQUIPMENT AND MATERIALS FOLHA
8 de 15
AUCTION PACKAGE UFN-V
01 (one) overhead traveller crane, manufactured by KOCH Metalúrgica, with a capacity of 20t, ranging from
25,000mm, 29,800mm in length and 8,000mm in elevation, speeds in the loaded hoist condition of 1.0m/min
and trolley of 10.0m/min, with electric motor drive of 18.5kW, 440V.
It is accompanied by the following items and accessories:
Item Descrição do Material Quantidade Unid.
1 Vigas - Batente 4,00 PÇ
2 Vigas - Suporte de Fixação do Passadiço 18,00 PÇ
3 Vigas - Flange Lateral 4,00 PÇ
4 Carro Guincho - Talha TK4 20T Elev. 8000 1,00 PÇ
5 Carro Guincho - Motofreio Talha 18,5 kW 440v 4 Polos 1,00 PÇ
6 Carro Guincho - Moitão 2 Rold. / 19mm 1,00 PÇ
7 Carro Guincho - Placa de Ident. da Talha 1,00 PÇ
8 Carro Guincho - Motorredutor Carro FA47/G DRS71S4BE1/TF 2,00 PÇ
9 Cabeceiras - Amortecedor 4,00 PÇ
10 Cabeceiras - Roda condutora diam.315 x 85mm (TT) 4,00 PÇ
11 Cabeceiras - Motorredutor FA67/G DRE90L4BE2/TF 2,00 PÇ
12 Passadiço - Letreiro Adesivo Koch 1,00 PÇ
13 Passadiço - Placa de Capacidade 20T 1,00 PÇ
14 Suporte Painél Elétrico em Aço A=1000 x L=1800 x P=300mm IP-65 1,00 PÇ
15 Suporte Resistores Frenagem 15 ohms/13.000W, Fixações 1,00 PÇ
16 Suporte painel 200 x 200 x 150mm - IP65 1,00 PÇ
17 Suporte painel - IP65 1,00 PÇ
18 Suportes 18,00 CJ
19 Paraf CSRT M14x 40 8.8 DIN933 18,00 PÇ
20 Arruela Pressao B14 DIN127 18,00 PÇ
21 Paraf CESI M 8x 30 12.9 DIN7991 1,00 PÇ
22 Arruela Lisa A 8,4 DIN125 1,00 PÇ
23 Porca Sext. M 8 DIN934.8 3,00 PÇ
24 Arruela Pressao B12 DIN127 95,00 PÇ
25 Paraf CSRT M12x 30 8.8 DIN933 89,00 PÇ
26 Paraf CSRT M10x 20 8.8 DIN933 6,00 PÇ
27 Arruela Pressao B10 DIN127 22,00 PÇ
28 Suporte 2,00 PÇ
29 Paraf CSRT M 8x 20 8.8 DIN933 2,00 PÇ
30 Tramela Pesada 1,00 PÇ
31 Arruela Pressao B 8 DIN127 3,00 PÇ
32 Emenda VS 1 17,00 PÇ
33 Suporte Fixo FBS 1 3,00 PÇ
34 Suporte Deslizante ABS 1 45,00 PÇ
35 Tampa final K30 6,00 PÇ
36 Suporte eletrificacao longitudinal 16,00 PÇ
37 Braco arrastador 2,00 PÇ
38 Batente de aço PS 1-1 1,00 PÇ
39 Paraf CSRT M10x 25 8.8 DIN933 17,00 PÇ
40 Cantoneira 6,4 x 50,8 x 600mm 16,00 PÇ
41 Suporte Sirene alcance 500m 220V RT-10 1,00 PÇ
SPECIFICATION OF EQUIPMENT AND MATERIALS FOLHA
9 de 15
AUCTION PACKAGE UFN-V
91 Trilho perfil C, em aço galvanizado 30 x 32 mm, esp 2,0 mm, comp 3,9m 2,00 PÇ
92 Trilho perfil C, em aço galvanizado 30 x 32 mm, esp 2,0 mm, comp 4m 17,00 PÇ
93 Manual de Instrução FSE-516 (AO516P06) 1,00 PÇ
94 Manual de Instrução ECO (AOE21P02) 1,00 PÇ
1 (one) conical fixed storage tank, designed according to API 620/650/NACE, atmospheric pressure, in ASTM
A-36 steel with the following main characteristics:
a. Net capacity of 15m³
b. Design Fluid: Sulfuric Acid @ 98%
c. Main nozzles: 2" input and 1" output
It is accompanied by the following items and accessories:
Item Descrição do Material Quantidade Unid.
1 GUARDA CORPO MONTADO 1,00 EA
2 ESCADA MARINHEIRO 1,00 EA
3 SUPORTE PARA TUBO NO COSTADO 1,00 EA
4 ABRAÇADEIRA COM PORCA E ARRUELAS 2,00 EA
5 SUPORTE PARA TUBO NO TETO 1,00 EA
6 PARAFUSO CABEÇA SEXTAVADA GALV Ø 5/8" X 1.3/4" P/ SUPORTE TUBOS 8,00 EA
7 PARAFUSO CABEÇA SEXTAVADA GALV Ø 5/8" X 1.3/4" P/ ESCADA MARINHEIRO 4,00 EA
8 PARAFUSO CABEÇA SEXTAVADA GALV Ø 1/2" X 1.3/4" P/ GUARDA-CORPO 12,00 EA
SPECIFICATION OF EQUIPMENT AND MATERIALS FOLHA
11 de 15
AUCTION PACKAGE UFN-V
1 (one) fuel gas buffer drum in carbon steel with the following main characteristics:
a. Nominal capacity of 1,5 m³
c. Maximum flow rate of 6,075 kg/h
c. Minimum Design Temperature of -12°C and Maximum of 85°C
d. Maximum Design Pressure of 9.0kg/cm²g
e. Corrosion Allowance of 3.0 mm
f. Main nozzles: 8" both input and output
It is accompanied by the following items and accessories:
Item Descrição do Material Quantidade Unid.
1 DEMISTER - DE: 9525.05-5135-540-INH POS: 16 1,00 EA
2 TIRANTE Ø 1/2" UNC X 8.1/2" - POS: 14 6,00 EA
3 PORCA SEXTAVADA Ø7 1/2" UNC 2B - POS: 15 6,00 EA
4 ESTOJO Ø 1.1/8" 8UN-2A X 7" 4,00 PÇ
5 PORCA SEXTAVADA SÉRIE PESADA Ø 1.1/8" 8UN-2B 8,00 PÇ
6 JUNTA SPIRAL WOND P/ FLAG. WN Ø 18" RF CL 150" 4,00 PÇ
1 (one) compressed air receiver vessel in carbon steel with the following main characteristics:
a. Rated capacity of 39.4 m³
b. Maximum vapor flow of 840 kg/h
c. Maximum Design Temperature of 75°C
d. Maximum Design Pressure of 12.0 kg/cm²g
e. Corrosion Allowance of 3.0 mm
f. Main nozzles: 4" both input and output
It is accompanied by the following items and accessories:
Item Descrição do Material Quantidade Unid.
1 ARRUELA DA BASE CH. 16MM - POS: 8 8,00 EA
2 TIRANTE BR. Ø 1/2" - POS: 20 12,00 EA
3 PORCA SEXTAVADA UNC 2B Ø 1/2" - POS: 21 12,00 EA
4 DEMISTER DE:-9525.05-5136-540-INH - POS: 22 1,00 EA
5 ANEL DO GABARITO CH. 9,5MM - POS: 23 1,00 EA
6 ESTOJO Ø 1.1/4" X 8" UN-2A 4,00 PÇ
7 PORCA SEXTAVADA Ø 1.1/4" UNC 2B 8,00 PÇ
8 JUNTA PLANA ASME B16.20 Ø 692 X 580 X 3,2MM 4,00 PÇ
SPECIFICATION OF EQUIPMENT AND MATERIALS FOLHA
12 de 15
AUCTION PACKAGE UFN-V
1 (one) instrument air receiver vessel, made of carbon steel with the following main characteristics:
a. Nominal capacity of 78.8 m³
b. Maximum vapor flow of 840 kg/h
c. Maximum Design Temperature of 75ºC
d. Maximum Design Pressure of 12 kg/cm²g
e. Corrosion Allowance of 3.0 mm
f. Main nozzles: 3" both input and output
Its composition is accompanied by the following items and accessories:
Item Descrição do Material Quantidade Unid.
1 ARRUELA DA BASE CH. 16MM - POS: 8 12,00 PÇ
2 ANEL DO GABARITO CH. 9,5MM - POS: 15 1,00 PÇ
3 JUNTA PLANA ASME B16.20 Ø 692 X 580 X 3,2MM 2,00 PÇ
4 ESTOJO Ø 1.1/4" X 8" UN-2A 4,00 PÇ
5 PORCA SEXTAVADA Ø 1.1/4" UNC 2B 4,00 PÇ
1 (one) Ammonia Flare Knock Out Drum, made of KCS steel with the following main characteristics:
a. Nominal capacity of 28.9 m³
b. Operating fluid: H2, N2, CH4, Ar and NH3
c. Minimum Design Temperature of -35 ° C and Maximum of 150 ° C
d. Maximum Design Pressure of 3.5 kg / cm²g
e. Corrosion Allowance of 3.0 mm
f. Main nozzles: 28" both input and output
It is accompanied by the following items and accessories:
Item Descrição do Material Quantidade Unid.
1 ESTOJO Ø 1.1/4" X 8" UN-2A 2,00 PÇ
2 PORCA SEXTAVADA Ø 1.1/4" UNC 2B 4,00 PÇ
3 JUNTA SPIRAL WORD P/ FLG WN Ø 24" RF 150# 2,00 PÇ
SPECIFICATION OF EQUIPMENT AND MATERIALS FOLHA
13 de 15
AUCTION PACKAGE UFN-V
1 (one) Reformed Gas Knock Out Drum made of KCS steel with the following main characteristics:
a. Nominal capacity of 168.6 m³
b. Operating fluid: H2, N2, CH4, Ar, CO, CO2 and H2O
c. Minimum Design Temperature of -12 ° C and Maximum of 399 ° C
d. Maximum Design Pressure of 3.5 kg / cm²g
e. Corrosion Allowance of 3.0 mm
f. Main nozzles: 32" both input and output
It is accompanied by the following items and accessories:
Item Descrição do Material Quantidade Unid.
1 INSERT EM CHAPA DE 31,5 X 300 X 3.270 MM- POS: 14 1,00 PÇ
2 PLACA DESLIZANTE SUP. CH. 9,5MM - POS: 15 3,00 PÇ
3 PLACA DESLIZANTE INF. CH. 9,5MM - POS: 17 3,00 PÇ
4 ESTOJO Ø 1.1/4" X 8" 8UN 2A - POS: 1 2,00 PÇ
5 PORCA SEXTAVADA SÉRIE PESADA Ø 1.1/4" 8UN-2B - POS: 2 4,00 PÇ
6 JUNTA SPIRAL WORD P/ FLANGE WN 304 RF 150# Ø 24" 2,00 PÇ
1 (one) ammonia drain drum, made of carbon steel for low temperature, with the following main characteristics:
a. Nominal capacity of 1.85 m³
b. Maximum steam flow of 122 kg / h
c. Minimum Design Temperature of -35 ° C and Maximum of 70 ° C
d. Maximum Design Pressure of 3.5 kg / cm²g
e. Corrosion Allowance of 3.0 mm
f. Main nozzles: 2" both input and output
Sendo sua composição acompanhada dos itens e acessórios relacionados a seguir:
Item Descrição do Material Quantidade Unid.
1 ANEL FLUTUANTE P/ ISOLAMENTO BR. Ø 1/2" - POS: 15 1,00 EA
2 ANEL FLUTUANTE P/ ISOLAMENTO BR. Ø 1/2" - POS: 21 2,00 EA
3 ESTOJO Ø 1.1/8" 8UN-2A X 7" 2,00 PÇ
4 PORCA SEXTAVADA SÉRIE PESADA Ø 1.1/8" 8UN-2B 4,00 PÇ
5 JUNTA SPIRAL WOND P/ FLANGE WN Ø 18" CL 150" RF 2,00 PÇ
SPECIFICATION OF EQUIPMENT AND MATERIALS FOLHA
14 de 15
AUCTION PACKAGE UFN-V
1 (one) dosing system of emulsion polymer VIBEMSS1004422PB in stainless steel structure, manufactured by
Milt Roy, consisting of 2 (two) metering pumps model C723-76HV, electromagnetic actuation, diaphragm
type, for polymer from 20% to 30% (viscosity 60 cP), maximum flow of 15.1 l/h, discharge pressure of
2.0kgf/cm², power of 0.022 kW, up to 100 beats per minute, electric transformer panel, calibration column,
pulsation damper, injection valve, hydropropelled mixer, piping and other components.
It is accompanied by the following items and accessories:
Item Descrição do Material Qtd Receb. Unid.
1 Ponteira de injeção em PVC. 1,00 PÇ
2 Controladores MP-1 00 2,00 PÇ
3 Cabos LMI de 04 vias 2,00 PÇ
1 (one) dosing system of emulsion polymer VIBEMSS1004422PB in stainless steel structure, manufactured by
Milt Roy, consisting of 2 (two) metering pumps model C723-76HV, electromagnetic actuation, diaphragm
type, for polymer from 20% to 30% (viscosity 60 cP), maximum flow of 15.1 l / h, discharge pressure of 2.0
kgf/cm², power of 0.022 kW, up to 100 beats per minute, electric transformer panel, calibration column,
pulsation damper, injection valve, hydropropelled mixer, piping and other components.
It is accompanied by the following items and accessories:
Item Descrição do Material Qtd Receb. Unid.
1 Ponteira de injeção em PVC. 1,00 PÇ
2 Controladores MP-1 00 2,00 PÇ
3 Cabos LMI de 04 vias 2,00 PÇ
374 (three hundred and seventy-four) ton of various Carbon Steel piping parts (composed of pipes, connections,
flanges, etc.), variable diameters from ¾ "to 56".
SPECIFICATION OF EQUIPMENT AND MATERIALS FOLHA
15 de 15
AUCTION PACKAGE UFN-V
314 (three hundred and fourteen) tons of predial metallic structure containing different pieces, destined to the
assembly of the buildings detailed in the table below, with the following standards:
- “W” and "HP" sections in Q345B steel (China) or ASTM-A572 Gr 50 (Brazil);
- "L" and "U" sections in Q235B / Q345B (China) or ASTM-A36 / A572 Gr 50 (Brazil);
- Plates in Q345B (china) or ASTM-A36 / USI-AP-360Q.
Quantitativo Correspondencia
Predios
(Ton) p/Montagem
724 (seven hundred and twenty-four) tons of metallic structure, containing 58,973 various parts and accessories
and 31,655 bolts / nuts, with the following standards:
- “W” and "HP" sections in Q345B steel (China) or ASTM-A572 Gr 50 (Brazil);
- "L" and "U" sections in Q235B / Q345B (China) or ASTM-A36 / A572 Gr 50 (Brazil);
- plates in Q345B (china) or ASTM-A36 / USI-AP-360Q.