You are on page 1of 9

TCEL and LCG grouping

June 20, 2019

1 © Nokia 2014
Sites with above 5 sectors Count of Cells
DHK_U0175@DHK_U0175 28
Objectives DHK_U4939
DHK_U0030
20
18
DHK_U3374@DHK_U3374 18
 To plan and dimension Tcell and LCG based on available site DHK_U3591
DHK_U2036
18
17
configuration DHK_U0173@DHK_U0173
DHK_U0128
14
14
DHK_U0337@DHK_U0337 14
 As site configurations are not all confirmed yet, Tcell and LCG will be DHK_U0728 14
DHK_U4367 14
adapted based on needs DHK_U0200@DHK_U0200 14
DHK_U0729 14
 Tcell strategy applied based on number of sectors in each site DHK_U0085@DHK_U0085 13
DHK_U1864@DHK_U1864 13
 RAN3067 Flexible HSDPA Carriers Aggregation will be enabled to DHK_U4770
DHK_U0038@DHK_U0038
12
12
reduce the amount of LCG needed(frequency based pooling will be used DHK_U2162
DHK_V0787
12
12
instead of sector based pooling for some config) DHK_U0045@DHK_U0045
DHK_U0834
12
12
DHK_U2069 12
 Tcell should be the same for cells in DC-HSDPA and unique for each DHK_U1220 12
DHK_U2276 12
cell in same frequency DHK_U1756@DHK_U1756 12
DHK_U0043@DHK_U0043 12
 Each LCG can support up to 12 cells(2Rx) or 6 cells(4Rx) DHK_U1763@DHK_U1763 12
DHK_U4441 12
 Each CCH pool can support up to 3 cells(10km,4 Rx div,4 RACH sig.) or DHK_U4874
DHK_U0078
12
12
6cells(10km,2 Rx div,4 RACH sig.) DHK_U0076
DHK_U0005
12
12
DHK_U0004 12
 Small LCG supports 1 HSDPA/HSUPA scheduler and Normal LCG DHK_U0737@DHK_U0737 12
supports 2 HSDPA+1 HSUPA scheduler
2 © Nokia 2014
Assignment for sites up to 3 sectors Required SU=HSDPA SU+CCH Pool+ HSUPA
PIC
-1 Normal LCG to be deployed with 2 HSDPA schedulers =1.125+0+1(2Rx case)=2.125SU
to support up to 320 HSDPA CA users =1.125+0+2(4Rx case)=3.125SU
-Additional PIC pool and CCCH pool needed if 4Rx div activated. Microsite:
-One PIC pool supports 3 cells(4Rx) or 6 cells(2Rx) Required SU=HSDPA SU+CCH pool+HSUPA PIC
-For microsite with 2 cells, small LCG can be used(0.625SU) =1.125(4 cells)
-HSUPA Interference cancellation will be disabled for micro site due to SU =0.625SU(2 cells)
shortage

f1 cells served by
LcrID Frequency/ Tcell LCG1
LCG
f2
1 F1/1 0
2 F1/1 3
3 F1/1 6
Scheduler 1 Group 1: Tcell values 0, 1 and 2
21 F2/1 0 Group 3: Tcell values 6, 7 and 8
22 F2/1 3
23 F2/1 6 Scheduler 2 Group 2: Tcell values 3, 4 and 5
Group 4: Tcell value 9

3 © Nokia 2014
Assignment for sites between 4 to 6 sectors(frequency based grouping)
-For sites between 4 to 6 sectors, LCG1->F1, LCG2->F2, both LCGs are normal
-One Tcell group per scheduler LcrID Frequency/ Tcell CAgroupID
-Advantage of this LCG/Tcell assignment is schedulers capability are distributed LCG
evenly compared to sector based grouping. UE rel-8 needed for this feature(DC 1 F1/1 0 1
support). CAgroupID has to be set per LCG 2 F1/1 1 1
-Disadvantage is that each scheduler can support up to 160 DC-HSDPA users 3 F1/1 2 1
only 4 F1/1 3 1
-Assumption of FSMF+2FBBA deployed and 2Rx only for sector 4-5 while 6
5 F1/1 4 1
sectors will be deployed with 2 FSMF+4 FBBA
6 F1/1 5 1

Scheduler 2 Scheduler 1 21 F2/2 0 1

22 F2/2 1 1

23 F2/2 2 1
cells served by 24 F2/2 3 1
LCG1
f1 25 F2/2 4 1

26 F2/2 5 1

cells served by
LCG2:
f2

Required SU=HSDPA SU+CCH Pool+ HSUPA PIC


4 © Nokia 2014 =(1.125*2)+0+2(2Rx case)+1=4.25SU
1 SU=8 HSUPA Res. Steps
Assignment for sites between 7 to 9 sectors(Sector based grouping)

-For sites between 7 to 9 sectors, LCG1->Sector 1-3, LcrID Frequency/ Tcell LcrID Frequency/ Tcell
LCG LCG
LCG2->Sector 4-6, LCG3->Sector 7-9.All LCGs are
normal 1 F1/1 0 21 F2/1 0

-Tcell assignment listed on right. 2 F1/1 3 22 F2/1 3

-PIC limitation of 3 due to sharing with GSM 3 F1/1 6 23 F2/1 6

-Assumption of FSMF+2FBBA deployed and 2Rx only 4 F1/2 1 24 F2/2 1

5 F1/2 4 25 F2/2 4
cells served by
6 F1/2 7 26 F2/2 7
cells served by LCG1
LCG3 7 F1/3 2 27 F2/3 2

8 F1/3 5 28 F2/3 5

9 F1/3 8 29 F2/3 8

f1
Required SU=HSDPA SU+CCH Pool+ HSUPA PIC
=(1.125*3)+0+3(2Rx case)=6.375SU
f2

5 © Nokia 2014
cells served by
LCG2
Assignment for sites more than 9 sectors(Sector based grouping)
-For 10 sector site(DHK_U4939), split into 2 sites with 5 sector each
-For 14 sector site(DHK_U0175@DHK_U0175), split to 2 sites
with 7 sector each
-Assumption of FSMF+2FBBA deployed and 2Rx only

BB cell set

6 © Nokia 2014
Site configuration, Static HSUPA allocation and SU consumption
3G SU Config PIC HSUPA LCG Available R99 R99 CE Formula(HSDPA scheduler+PIC
available pool Resource step* type(LCG1/2/3 SU commissioned pool)
)
3.5 1 Sector(Microsite) 0 0 Small 2.875 SU 276 0.625
3.5 2 Sectors(Microsite) 0 0 Small 2.875 SU 276 0.625
8.5 Up to 3 Sectors 1 0 Normal 6.375 SU 612 1.125+1=2.125
8.5 Up to 3 2 0 Normal 5.375 SU 516 1.125+2+3.125
Sectors(4Rx)
8.5 4 Sectors 2 0 Normal/Normal 4.25 SU 408 1.125*2+2=4.25
8.5 5 Sectors 2 0 Normal/Normal 4.25 SU 408 1.125*2+2=4.25
14.5 6 Sectors 2 0 Normal/Normal 10.25 SU 984 1.125*2+2=4.25
14.5 7 Sectors 3 0 Normal/Normal/ 8.625 SU 828 1.125*2+0.625+3=5.875
Small
14.5 8 Sectors 3 0 Normal/Normal/ 8.125 SU 780 1.125*3+3=6.375
Normal
14.5 9 Sectors 3 0 NormalNormal/N 8.125 SU 780 1.125*3+3=6.375
ormal/Normal

HSUPA static allocation are for HSUPA usage only. DCH/R99 traffic will not be able to use SU reserved for HSUPA
7 © Nokia 2014
PIC pool limitation and HSUPA capacity table

HSUPA capacity
table

8 © Nokia 2014
VAM settings
For 2T4R cells, VAM needs to be enabled in commissioning and MIMO to be set to
2xDL and FDE has to be disabled for 4Rx sites

9 © Nokia 2014

You might also like