Professional Documents
Culture Documents
What is drying?
Line Dry
Hang damp garment from line or bar, in or
outdoors.
Drip Dry
Hang dripping wet garment from line or bar, in
or out doors, without hand shaping or
smoothing.
Dry Flat
Lay out horizontally for drying.
Dry to Shade
Usually added to Line or Drip Dry. Dry away
from direct sunlight.
Do Not Wring
Do Not Wring.
Fabrics that should go in
the clothes drier
Acrylic - Generally, it is shrink-resistant but keep it on a reasonably low
heat and take it out just before it’s fully dry. Also, remember that acrylic can
build up static – so watch out for little electric shocks when you pull the
items out of the dryer!
Cotton – It can potentially shrink in the dryer; the amount of shrinkage can
depend on whether the item is pre-shrunk and how loose the weave is. A
looser weave can shrink more. It also depends whether the item is 100%
cotton or a blend. Use a low heat setting if you need to run your cotton
clothing through the dryer.
Linen - Similarly to cotton, linen is also spun and woven. It’s a beautiful and
very breathable fabric – but it also creases very easily! While linen may
shrink slightly in the clothes dryer, a potentially bigger problem is the
almost-impossible-to-iron-out creases that could end up covering your linen
clothing if you over-dry it.
Microfiber - In terms of clothing, microfiber can be used for athletic
wear, skirts, jackets – even suits. Generally, it’s safe to put microfiber
in the clothes dryer – but use a cool setting.
Make sure your clothes are dry enough to go into the tumble dryer
– they should be wet, but not dripping. If your clothing is very wet,
it can take a very long time for the dryer to do its job. If clothing is
dripping, leave it in the washing machine for an extra spin cycle to
remove as much excess water as possible.
Load the tumble dryer with clothing that can safely be machine
dried and choose a suitable tumble dry setting. Some older tumble
dryers may only have a single setting, while newer models may
have a ‘high’ and ‘low’ setting. Some clothing may have a symbol
that indicates what temperature is needed.
Set the desired time and allow the clothing to spin and dry. Check
the clothing before removing to ensure everything is dry. If the
clothing still appears to be damp, untangle the garments from each
other, and put the machine on for another (shorter) tumble.
Clean out the lint filter. The lint filter collects any lint that comes off
your clothes during the drying process. A blocked filter – which can
happen even after just one spin if you’ve been drying fluffy items
like thick towels – can mean it takes longer for the machine to dry
your clothes, and it increases the risk of overheating which could
damage the dryer.
Tumble Dryer Tips
Try to find a happy medium between overfilling and under filling
your tumble dryer. Overfilling means that clothing could easily
become tangled, while under filling means you could be wasting
money by not being energy efficient.
Ensure you’ve got good ventilation in the room when your tumble
dryer is on. Open the windows if possible – it will help reduce the
risk of overheating and damage to the machine.
Thank You!!!