In country X and Y project we were working for multi vendor (E///) post optimization project . We have applied DL power parameter changes to improve CDR. By using the parameters minimumRate, minPwrMax, interRate, interPwrMax, maxRate and maxPwrMax the so called DL power mapping curve is made up. The parameters decide three points on the curve giving the maximum transmission power (relative CPICH power) for corresponding rate Between these points the maximum transmission power is interpolated. It can be optimized by changing these parameters through various steps.
Previous setting
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential
Step 1 – Increasing Speech power
This increases maximum transmission
power for all radio links with a transmission rate up to minimumRate (default 15.9 kbps). More power can be used if the radio link gets poor and the call can be maintained longer, thus improving retainability. Field trials have been done increasing minPwrMax from 0 dB up to 3 dB with very good improvements on speech Retainibility
Recommended changes
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential
Page 3 Improvement after applied changes
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential
Page 4 Summary
Similarly we apply the following setting in various condition
• MinRL power change •Max RL power change •Both Min & max RL power change •minimumRate 0.1 to 0.2% •interRate & maxRate CDR improve 0.2 to 0.4%
•Note: This Parameters applicable only on the sites where there is no DL power congestions