Professional Documents
Culture Documents
Phase 1
Auto Intensity Control of Street Lights using
Arduino
Presented by
Lavanya H U 4GW18EC042
Meghana H U 4GW18EC048
1
AGENDA
• Introduction
• Aim and Objectives
• Methodology
• Flowchart/Block Diagram
• Circuit diagram
• Expected results
• Conclusion
• References
2
INTRODUCTION
Generally, street lights are turned on during evening time and will
continue to glow till morning.
As additional power saving feature, we have used LEDs for street lights.
3
AIM & OBJECTIVES
Aim
We will design and build a simple but effective circuit called Auto Intensity
control of Street Lights using Arduino.
Objectives
• Control the intensity.
• Decrease the usage of electricity.
• Usage of LEDs in place of HID lamps.
4
SYSTEM REQUIREMENT SPECIFICATIONS
• Arduino UNO
• DS3231 RTC Module
• LDR
• 16×2 LCD Display
• LED
• 10KΩ Potentiometer
• 10KΩ Resistor
• Push Button
• Connecting Wires
• Breadboard
5
METHODOLOGY
• First connect the SDA and SCL pins of DS3231 RTC Module to A4 (SDA)
and A5 (SCL) pins of Arduino. A 10KΩ Resistor and an LDR are connected
in a voltage divider format and its output is given to A3 pin (of Arduino).
• The data pins of 16×2 LCD Module i.e. D4 – D7 are connected to 6, 5, 4 and
3 pins of Arduino respectively. The RS and E pins are connected to pins 8
and 7.
6
FLOWCHART/BLOCK DIAGRAM
7
CIRCUIT DIAGRAM
(only for hardware)
8
EXPECTED RESULTS
9
CONCLUSION
A simple project for saving power is implemented using Auto Intensity
Control of Street Lights using Arduino and it is cost effective, practical eco
friendly. According to statistical data we can save more than 40% of electrical
energy that is now consumed by highways.
10
REFERENCES
1. https://www.electronicshub.org
2. YouTube
3. Schwab, R. N., Walton, N.E., Mounce, J.M., and Rosenbaum, M.J.
Synthesis of Safety
4. Design and fabrication of automatic street light.
5. www.keil.com
6. www.allaboutcircuits.com
7. Commission International de 1’Eclairage.
8. www.electronicsforu.com
11