Professional Documents
Culture Documents
Select System
Select Pipeline
Select Specification
Select Insulation
Define Nominal Size
09/06/2021 2
3 D P L A N T D E S I G N A N D E N G I N E E R I N G S O F T W A R E
Define systems
Everything in model must have a System. For example pipes in "Fresh Water",
building in "Building", Steel constructions in "Platforms" or "Supports", Pumps in
"Equipment" etc…
New system:
Give a name, which describes System best way, pick up color and ”Stipple” for it.
More colors can be defined with Configure colors tool
09/06/2021 3
3 D P L A N T D E S I G N A N D E N G I N E E R I N G S O F T W A R E
Define pipelines
Pipes are routed according Systems. First when routing a Pipe, you pick up the right
system then you choose the right pipeline from this system.
Give pipelines name and choose specification(s) for it. Add required attribute
information.
09/06/2021 4
3 D P L A N T D E S I G N A N D E N G I N E E R I N G S O F T W A R E
09/06/2021 5
3 D P L A N T D E S I G N A N D E N G I N E E R I N G S O F T W A R E
Select the
line size
09/06/2021 6
3 D P L A N T D E S I G N A N D E N G I N E E R I N G S O F T W A R E
Specifications
Piping Specification or Pipe Class is rule, which defines what type of pipes,
flanges, bends, branches, valves, etc. are allowed to use.
Meaning of this is, that when routing a pipe, after you picked right system
and pipeline, you automatically have right type of piping parts and standard
components in use.
Specifications are managed by Cadmatic Administrators
09/06/2021 7