Professional Documents
Culture Documents
Your Poster Title Would Go On These Lines: Conclusion
Your Poster Title Would Go On These Lines: Conclusion
com
Your poster title would go on these lines
Author Name, RN1; Author Name, Ph.D2, Author Name, RN2,3; Author Name, Ph.D1,4
1
Name of University, City, State; 2Name of University, City, State; 3Name of University, City, State; 4Name of University, City, State;
ABSTRACT
By 2030, the estimated requirement of power in Bangladesh will
become 34,000 MW, whereas the installed capacity until date is Conclusion
18,753 MW including solar power generation. To cope up with the Your text would go here. List your information on these lines. Your text would go here. List your
increasing demand and ensure reduced adverse impact on the information on these lines. Your text would go here. List your information on these lines. Your text
environment, a power plant based on supercritical carbon dioxide as would go here. List your information on these lines. Your text would go here. List your information on
working fluid is proposed in order to facilitate sustainable development these lines. Your text would go here. List your information on these lines. Your text would go here. List
in the eighth ranked country in terms of population. The power plant is your information on these lines. Your text would go here. List your information on these lines.
based on closed loop recompression Brayton cycle with partial cooling
in which the working fluid is carbon dioxide. This power plant is Limitations
expected to generate 40 MW power at an efficiency of 44.52%. This
high percentage of efficiency will be possible
due to presence of supercritical CO2 as the working fluid.
Inlet temperature of sCO2 to the compressor, 31.25 0C
Outlet temperature of sCO2 from the compressor, 69.17 00C
Inlet temperature of sCO2 to the turbine, 570
570 0C
0
C
Outlet temperature of sCO2 from the turbine, 450.504
450.5040 0C
0
C
INTRODUCTION
31.25 0C
Inlet temperature of sCO2 to the solar receiver, 31.250 C
92.6 C
Outlet temperature of sCO2 from the turbine, 92.6
550 0CC
0
Acknowledgments
Excess Air percentage, 300
Products temperature, C
The exergy destruction rate of the first compressor is, Effectiveness of auxiliary heat exchanger, 0.9
0.9
References
1. S
Inlet specific enthalpy of sCO2 to the compressor, 321.909
Outlet specific enthalpy of sCO2 from the compressor, 347.529
Inlet specific enthalpy of sCO2 to the turbine, 1059.797
Outlet specific enthalpy of sCO2 from the turbine, 926.8985
Mathematical Modeling of Energy Analysis Inlet specific enthalpy of sCO2 to the solar receiver, 872.244
Outlet specific enthalpy of sCO2 from the turbine, 514.547
The power input of the first compressor is Inlet specific enthalpy of sCO2 to the auxiliary heat 1034.947
exchanger,
Outlet specific enthalpy of sCO2 from the LTR before 537.6259
The power input of the second compressor is mixing with the flow from the second compressor ,
Inlet specific enthalpy of sCO2 to the HTR, 562.54
Outlet specific enthalpy of sCO2 from the HTR, 619.096
Outlet specific enthalpy of sCO2 from the second 592.99
The isentropic efficiency of the first compressor is defined as follows: compressor before mixing with the flow from first
compressor, Temperature at the inlet of Compressor 1, T 1 C