You are on page 1of 39

INTRODUCCIÓN A LA TECNOLOGÍA

GPON

Proyecto GPON-FTTH Telefonica


CONTENIDO PROGRAMÁTICO

• Teoría básica de PON


• Generalidades de GPON y la Estru
ctura de red
• Estructura de tramas GPON
• Aprovisionamiento en GPON
TEORÍA BÁSICA DE PON

© ZTE Corporation. All rights reserved


3
¿ Qué es PON?
• Significa Redes Ópticas Pasivas, sus siglas en inglés “Passive Op
tical Networks”
• Utiliza topología de tipo P2MP
• Cada hilo de fibra sale hacia divisores ópticos pasivos donde la s
eñal es multiplexada hasta para 64 líneas distintas.
• Tiene un rango de tráfico de datos en downstream de hasta 2,5Gb
ps.
• Las redes PON se forman básicamente de:
• OLT P2MP

1 optical fiber Splitter


• Divisores Ópticos Terminal
User
• ONU’s
© ZTE Corporation. All rights reserved
4
Aplicaciones PON
• FTTC – FTTB – FTTH – FTTO – FTTM

© ZTE Corporation. All rights reserved


5
Aplicaciones PON - Escenarios
1. Escenario FTTC
 PON+ADSL2+, VDSL2
 Fiber to node, curb, and cabinet
 ONU in outdoor cabinet or on pole
 VDSL2 for up to 100M broadband access

2. Escenario FTTB
 There is the existing UTP-5 (FTTB+LAN) or twisted-pair (FTTB+DSL) in the building.
The existing UTP-5 or twisted-pair in the building can be used to save the cost of networkin
g, for higher building, cable box can be used in certain layer to make it easy for cable plann
ing.
 Self-governed enterprises or companies in commercial building, family subscriber in
the apartment building.

© ZTE Corporation. All rights reserved


6
Aplicaciones PON - Escenarios
3. Escenario FTTO
 Government, bank, police station, office, internet cafe
 Associated with PBX via E1 uplink and with LAN Switch via Ethernet uplink
 It is similar to that of FTTB, but the distance between ONU and user is generally no m
ore than 50 meters.

4. Escenario FTTM/FTTCell
 FTTM for Macro Cell: PON bearing Macro cell solution fully uses PON advantages: su
ch as high bandwidth, high-precision clock transfer, good QoS guarantee and complet
e protection mechanism to effectively combine FTTx bandwidth network construction.
It provides low cost, flexible and convenient base bearing solutions for operators. So
far, PON bearing scenario for Macro cells includes E1/T1 services backhaul of 2G, FE/
GE services backhaul for 3G and LTE.
 FTTM for Small Cell: There are variety of the typical application scenarios for small ce
ll such as home, enterprise, public and rural areas. The small cell base station consist
s of indoor product and outdoor products. Therefore, the PON-based FTTH, FTTC/O s
olution, and long reach FTTx solution are all suitable for construction of the small cell
backhaul network with its special topological requirements.

© ZTE Corporation. All rights reserved


7
Aplicaciones PON - Escenarios
5. Escenario FTTH
 The ZXA10 C300/C320 provides VoIP, IPTV, HSI, Video Surveillance, CATV, and other s
ervices for the subscribers.
 Apartments, villas, high-end neighborhoods, new neighborhoods
 SFU+HGW "1+1" two level coverage to simplify access networks and address difficult
layout
 HGU serves as intelligent home center
 With 16 ports GPON line card, OLT provides more subscribers in high density areas.

© ZTE Corporation. All rights reserved


8
Generalidades de GPON y la estru
ctura de red

© ZTE Corporation. All rights reserved


9
¿Por qué GPON?
Red Óptica Pasiva con Capacidad de Gigabi
t (Gigabit-Capable Passive Optical Network
s)
 Superioridad de Ancho de Banda
 Flexible a actualizaciones
 Rápida instalación
 Reduce el gasto OPEX
 Garantía de QoS
 Convergencia de servicios
 Características de las fibras:
– Distancias de transporte largas
– Seguridad
– Inmunidad a la interferencia electromagnética (EMI)
© ZTE Corporation. All rights reserved
10
Estándares GPON
ITU-T G.984.1 ITU-T G.984.2
• Descripción de parámetros de redes GPON • Especificaciones de parámetros de ODN
• Requisitos de protección de las redes • Especificaciones de capacidad de 2.488Gbps en downstream
en los puertos ópticos
• Especificaciones de capacidad de 1.244Gbps en upstream en
los puertos ópticos
• Asignación de gastos generales en la capa física

Proceso de desarrollo simple


Poderosa compatibilidad

ITU-T G-984.1/2/3/4
ITU-T G.984.3
• Especificaciones de la capa TC en el sistema GPON
• Arquitectura multiplexación GTC y stack de ITU-T G.984.4
protocolos • Formato de mensajes OMCI
• Tramas GTC • Trama de gestión de dispositivos vía OMCI
• Activación y registro ONU • Principios de funcionamiento OMCI
• Especificaciones DBA
• Alarmas y rendimiento

© ZTE Corporation. All rights reserved


11
Servicios GPON

© ZTE Corporation. All rights reserved


12
Estructura de red GPON

© ZTE Corporation. All rights reserved


13
GPON Bit rate y Transmisión

- El downstream soporta 2488.32Mbit/s, y el u


pstream soporta 1244.16 Mbit/s.
- La transmisión en downstream adopta la lon
gitud de onda de 1490 nm y la transmisión
en upstream la longitud de onda de 1310nm.

© ZTE Corporation. All rights reserved


14
Distancia GPON El alcance lógico es la distancia máxima entre la ONU/ONT y la
OLT a excepción de la limitación de la capa física. En GPON, la
distancia máxima lógica alcanzada se define en 60 km.

El alcance físico es la distancia física máxima entre la


ONU/ONT y la OLT. En GPON soporta 3 modos 0-20 km,
20-40 km y 40-60km.

© ZTE Corporation. All rights reserved


15
GPON – Radio de Splitting

- Hasta 1:64 es realista para la capa física dad


a la tecnología actual.

- Sin embargo, anticipando a la continua evolu


ción de los módulos ópticos, la capa de conver
gencia de transmisión (TC) debe considerar ra
dios de splitting hasta 1:128.
© ZTE Corporation. All rights reserved
16
GPON – Tipos de protección

Tipo B: Modo de
protección de OLT y
Fibra principal

Tipo C : Modo de
protección completa

© ZTE Corporation. All rights reserved


17
GPON – Definiciones
TCONT – GEMPORT – SERVICE PORT

© ZTE Corporation. All rights reserved


18
GPON – Definiciones

- T-CONT: Contenedores de transmisión (Transmission Container


s) es un objeto ONU que representa un grupo de conexiones lógi
cas que aparecen como un sola entidad para el propósito de asign
ar el ancho de banda de Upstream en el PON. Para una ONT, el n
úmero de T-CONTs soportados es fijo.
- GEMPORT: Es un puerto virtual para realizar encapsulación G
EM para la transmisión de tramas entre la OLT y la ONT. Cada d
iferente TC (traffic-class) por UNI es asignado a un diferente GE
M Port. Cada T-CONT consiste de uno o mas puertos GEM.
- SERVICE PORT: Es un bloque de adaptación de servicios, se e
© ZTE Corporation. All rights reserved
19
GPON – Definiciones

© ZTE Corporation. All rights reserved


20
GPON – Multiplexación

VCI: Virtual channel identifier


VPI: Virtual path identifier

MULTIPLEXACIÓN EN EL SERVICIO ATM


© ZTE Corporation. All rights reserved
21
GPON – Multiplexación

MULTIPLEXACIÓN EN EL SERVICIO GEM


© ZTE Corporation. All rights reserved
22
GPON – Multiplexación

MULTIPLEXACIÓN COMBINADA
© ZTE Corporation. All rights reserved
23
Estructura de tramas GPON

© ZTE Corporation. All rights reserved


24
GPON – Estructura de trama descendente
ONU1 1 User1

N
2
d 1
PCB
Splitter
PCBd 1 2 N PCBd 1 2 N User2
ONU2 2
OLT
PCB
d 1
2
N

• The OLT send PCBd in a ONUN N User N

broadcast manner and each


ONU receives the entire
Pure ATM cells TDM & data fragments
PCBd. section over GEM section
125µs

PCBd 1 2 N PCBd 1 2 N PCBd 1 2 N

Psync Ident PLOAMd BIP Plend Plend Bwmap PCBd: Physical control
4bytes 4bytes 13bytes 1bytes 4bytes 4bytes N*8bytes
block downstream

GPON usa en downstream TDM


© ZTE Corporation. All rights reserved
25
GPON – Estructura de trama descendente

Estructura de trama descendente

Bloque de control físico descendente

© ZTE Corporation. All rights reserved


26
GPON – Estructura de trama ascendente
ONU1
1 User1

Splitter
1 2 N 2 ONU2
2 User2
OLT

N
ONUn
N Usern

Upstream frame
125µs
1 2 N 1 2 N 1 2 N

PLOu PLOAMu PLSu DBRu Payload

GPON usa en upstream TDMA ATM upstream


payload
GEM upstream
payload
DBA upstream
payload

© ZTE Corporation. All rights reserved


27
GPON – Estructura de trama ascendente

Estructura de trama ascendente

© ZTE Corporation. All rights reserved


28
Aprovisionamiento en GPON

© ZTE Corporation. All rights reserved


29
ENTENDIENDO LA CLI
Interfaz de Línea de Comandos – Command Line Interface
Un módulo CLI implementa la función de gestión mediante el puerto serial
o mediante un puerto ethernet remoto Telnet/CLI.
El equipo OLT de la solución también implementa SSH para conexión remo
ta de gestión.

© ZTE Corporation. All rights reserved


30
INGRESO CLI AL EQUIPO OLT C300

© ZTE Corporation. All rights reserved


31
FLUJO LÓGICO DE APROVISIONAMIENTO GPON

© ZTE Corporation. All rights reserved


32
PASO A PASO – CONFIGURACIONES PARA ALTAS

NOTA: Cualquier configuración que se requiera realizar el usuario a cargo debe te


ner los permisos necesarios e ingresar siempre en modo de configuración global.
1. En modo “interface gpon-olt_1/slot/puerto”, se debe crear la ONT.
GPON_TEF(config)#interface gpon-olt_1/2/16
GPON_TEF(config-if)#onu 1 type ASKEY pw 1234567890
.[Successful]

2. En modo “interface gpon-onu_1/slot/puerto:ontid”, desvincular SN ONU.


GPON_TEF(config-if)#sn-bind disable
GPON_TEF(config-if)#

3. En modo “interface gpon-onu_1/slot/puerto:ontid”, configurar los T-CONTs.


GPON_TEF(config)#interface gpon-onu_1/2/16:1
GPON_TEF(config-if)#tcont 1 name VOIP profile 128K
GPON_TEF(config-if)#tcont 2 name INTERNET profile 100M

© ZTE Corporation. All rights reserved


33
PASO A PASO – CONFIGURACIONES PARA ALTAS

4. En modo “interface gpon-onu_1/slot/puerto:ontid”, configurar los GEM-Ports.


GPON_TEF(config-if)#gemport 1 name VOIP tcont 1
GPON_TEF(config-if)#gemport 2 name INTERNET tcont 2
GPON_TEF(config-if)#gemport 1 traffic-limit downstream 128K
GPON_TEF(config-if)#gemport 2 traffic-limit downstream 50M

5. En modo “interface gpon-onu_1/slot/puerto:ontid”, se debe crear los service ports


VLAN.
GPON_TEF(config)#interface gpon-olt_1/2/16
GPON_TEF(config-if)#service-port 1 vport 1 user-vlan 101 vlan 70
GPON_TEF(config-if)#service-port 2 vport 2 user-vlan 100 vlan 100 svlan 3902

6. En modo “interface gpon-onu_1/slot/puerto:ontid”, configurar función opción82, a


plica solo para VoIP.
GPON_TEF(config)#interface gpon-onu_1/2/16:1
GPON_TEF(config-if)#dhcpv4-l2-relay-agent enable vport 1
GPON_TEF(config-if)#
© ZTE Corporation. All rights reserved
34
PASO A PASO – CONFIGURACIONES PARA ALTAS

7. En modo “pon-onu-mng gpon-onu_1/slot/puerto:ontid”, configurar los canales de s


ervicios.
GPON_TEF(gpon-onu-mng 1/2/16:1)#service VOIP gemport 1 cos 6 vlan 101
GPON_TEF(gpon-onu-mng 1/2/16:1)#service INTERNET gemport 2 cos 0 vlan 100

© ZTE Corporation. All rights reserved


35
PASO A PASO – CONFIGURACIONES PARA BAJAS
POR SERVICIOS
1. En modo “pon-onu-mng gpon-onu_1/slot/puerto:ontid”, eliminar los canales de ser
vicios.
GPON_TEF(gpon-onu-mng 1/2/16:1)#no service VOIP
GPON_TEF(gpon-onu-mng 1/2/16:1)#no service INTERNET

2. En modo “interface gpon-onu_1/slot/puerto:ontid”, se debe eliminar los service por


ts VLAN.
GPON_TEF(config)#interface gpon-olt_1/2/16
GPON_TEF(config-if)#no service-port 1
GPON_TEF(config-if)#no service-port 2

3. En modo “interface gpon-onu_1/slot/puerto:ontid”, eliminar los GEM-Ports.


GPON_TEF(config-if)#no gemport 1
GPON_TEF(config-if)#no gemport 2

4. En modo “interface gpon-onu_1/slot/puerto:ontid”, eliminar los T-CONTs.


GPON_TEF(config-if)#no tcont 1
GPON_TEF(config-if)#no tcont 2
© ZTE Corporation. All rights reserved
36
PASO A PASO – CONFIGURACIONES PARA BAJAS
POR SERVICIOS
5. En modo “interface gpon-onu_1/slot/puerto:ontid”, desactivar función opción82 pa
ra VoIP.
GPON_TEF(config)#interface gpon-onu_1/2/16:1
GPON_TEF(config-if)#dhcpv4-l2-relay-agent disable vport 1
GPON_TEF(config-if)#

© ZTE Corporation. All rights reserved


37
PASO A PASO – CONFIGURACIONES PARA BAJAS T
OTALES
1. En modo “interface gpon-olt_1/slot/puerto”, se debe eliminar la ONT.
GPON_TEF(config)#interface gpon-olt_1/2/16
GPON_TEF(config-if)#no onu 1
......[Successful]

© ZTE Corporation. All rights reserved


38
Thank you

You might also like