Professional Documents
Culture Documents
INTRODUCTION
LITERATURE REVIEW
OBJECTIVE
METHODOLOGY
RESULTS
DISCUSSION
CONCLUSION
INTRODUCTION
• Autodesk Revit software is a BIM application for authoring parametric 3D models that generate
geometry with embedded information for the design and construction of buildings and
infrastructure.
• Autodesk Revit is a BIM software used for architects, landscape architects, structural engineers,
mechanical, electrical and plumbing(MEP) engineers, designers and contractors.
• It is from these intelligent models that plans, sections, elevations, perspectives, details, and
schedules—all of the necessary instruments to document the design of a building— can be derived.
• Revit gives the opportunity to more easily input, manage, and export the project data for project
coordination and execution.
LITERATURE RIVIEW
OBJECTIVE
Revit aims to make participants more productive by giving them the ability to produce drawings and
redefine images of buildings and help navigate user interface, architectural objects such as floor,
walls, roofs, windows, and stairs.
METHODOLOGY
Open the architecture project template, interface will be appeared as shown in the figure 1 .
Figure 1 : Interface
ELEVATION AND LEVELS
• Select SOUTH elevation, default two levels, level 1 and level 2 will be created. Make the distance between
two levels is 2’0” and rename it as 1.Ground level and 2.Ground floor.
• Create three more levels using level command rename them as 3.First floor 4.Terrace plan and 5.Head room
slab and distance between the levels is 10’6” , 10’6” and 8’0” respectively.
Figure 3. Ground level main walls Figure 4. ground floor main & interior walls
• Create slab for ground level using Floor command.
• Slab : Floor generic 0’6”
• Insert doors for Living room, Three bedrooms and Two washrooms.
• Insert windows for Living room and Three bedrooms.
• Ventilation for Two washrooms .
• Click on component command , place a component. Refer load family for components.
• Place beds, storages, cupboards, table and chair in bedrooms.
• Place dinning table and sink in dinning hall.
• Water closet and sinks in washrooms.
• Stove top, fridge and sink in kitchen.
• Sofa in drawing room and living room.
Figure 10. Ground floor furniture Figure 11. 3D View
Figure 12. First floor furniture Figure 13. 3D View
BOUNDARY WALL AND INSERTING GATE
Place basic generic wall 0’9” in the ground floor to a unconnected height of 6’0”.
Insert the steel gate of dimensions 10’3”X5’0”
Figure 14. Boundary wall and gate ground floor Figure 15. 3D South view
ROOM TAG AND DIMENSIONS
• Stair command is used for the stair. Specified the dimensions as 0’7” max riser and 0’11” tread.
• Stairs is placed by clicking at the one end and on another end.
• Railing Glass panel bottom fill is used.
• By using floor command, create closed area with the boundary line or rectangular box then finish.
• Floor generic 0’6” slab was created.
Figure 19. Terrace slab and headroom slab Figure 20. Terrace railing
EXTERIOR DESIGN AND ROAD
• Exterior design is done for good looking of the building.
• Component command, model in place then select structural frame. Extrusion and pick a plane
creates the frame work , according to requirement exterior design is done.