Professional Documents
Culture Documents
ESN: 598909
ETSN: 2965
ECSN: 1679
Airline: SKU
Date: Jan-21-2022
CFM, CFM56, LEAP and the CFM logo are trademarks of CFM International, a 50/50 joint company between GE and Safran Aircraft Engines. The information in this document is CFM Proprietary Information and is disclosed in confidence. It is the property of CFM International and its parent companies, and shall not be used, disclosed to others or reproduced without the express
written consent of CFM. If consent is given for reproduction in whole or in part, this notice shall appear in any such reproduction in whole or in part. The information contained in this document may also be controlled by the U.S. and French export control laws. Unauthorized export or re-export is prohibited.
New HPTACC Manifolds inspection (EXTERNAL)
HPT Case aft flange
must be reinspected
within 1000 cycles
Measure length,
Was the HPT width & depth
Operator No Remove top Inspect HPTC Request DR for HPTACC
Middle Yes Case aft flange at each location
identifies half of each aft flange at Manifolds & brackets, including
Bracket inspected for with wear (see
cracked cracked each cracked HPT case wear dimensions per
included? wear within next slide)
brackets middle bracket middle bracket template
1000 cycles? Reinstall top
No half of brackets
Yes
Yes CFM evaluates
Evidence wear & issues
of wear? appropriate DR
Torque the bolts of the top half of mid Brackets to between 106 to 124 lb in. (11.9 to 14.0 Nm).
2 / CFM Proprietary Information subject to restrictions on the cover
HPT Case – Fretting report
Bracket
Dimension of the Maximum depth HPT Case SN:
Location SIN defect (Maximum length & of the
location ALF width) defect
Please inspect the HPT aft flange case for
1
2
2 O'clock
5 O'clock
62106
62105
fretting and include the results in the
3 8 O'clock 62104 table, with minimum accuracy of 3
4 11 O'clock 62103 decimals for inches and 2 for millimeters.
Remove outboard portion Measure maximum depth, width, and length of worn area
of cracked bracket Submit HPT case measurements with DR request
3 / CFM Proprietary Information subject to restrictions on the cover
DR issued per table
HPTACC Manifolds POST SB 72-0127 Configuration
This presentation is to ease and clarify the identification of broken brackets of the HPTACC Manifolds for Leap-
1A. For additional damages on the HPTACC Manifolds please add slides as required.
1 Broken Bracket 2 Broken Brackets 3 Broken Brackets
Continue in service (AMM) Continue in service (AMM) Continue in service (AMM)
• Replace after 1000 cycles • Replace after 500 cycles • Replace after 150 cycles Example: Mark the location of the
broken brackets
SIN: 62103 SIN: 62106
P/N: 2709M93G01 P/N: 2709M96G01
FWD
ALF
Conform ____
____ Conform Damage ____
____ Damage
Location
Bracket
SIN
Dimension of the
defect (Maximum length &
Maximum depth
of the
HPT Case SN: PAMRU961
location ALF
width) defect
Please inspect the HPT aft flange case for
4 11 O'clock 62103
fretting and include the results in the
table, with minimum accuracy of 3
decimals for inches and 2 for millimeters.
Remove outboard portion Measure maximum depth, width, and length of worn area
of cracked bracket Submit HPT case measurements with DR request
6 / CFM Proprietary Information subject to restrictions on the cover
DR issued per table
HPTACC Manifold SIN: 62104 POST SB 72-0127 Configuration
Conform ____
Damage ____ FWD
62104_2709M94G01
6211E_2742M65P01
____ Conform
____ Damage Conform ____ ADD PICTURES HERE
Damage _X_ (WHEN REQUIRED)
Conform ____
____ Conform Damage ____
____ Damage
Location
Bracket
SIN
Dimension of the
defect (Maximum length &
Maximum depth
of the
HPT Case SN: PAMRU961
location ALF
width) defect
Please inspect the HPT aft flange case for
3 8 O'clock 62104
fretting and include the results in the
table, with minimum accuracy of 3
decimals for inches and 2 for millimeters.
Remove outboard portion Measure maximum depth, width, and length of worn area
of cracked bracket Submit HPT case measurements with DR request
8 / CFM Proprietary Information subject to restrictions on the cover
DR issued per table
HPTACC Manifold SIN: 62105 POST SB 72-0127 Configuration
Conform ____
62105_2709M95G01
Damage ____
____ Conform
____ Damage FWD
ADD PICTURES HERE
62110_2742M60P01 (WHEN REQUIRED)
____ Conform
____ Damage
Conform ____
Damage ____
____ Conform
____ Damage
FWD
62106_2709M96G01
____ Conform
____ Damage
Conform ____
Damage ____
6211E_2742M65P01
ADD PICTURES HERE
(WHEN REQUIRED)
____ Conform
_X___ Damage
Conform ____
Damage ____
____ Conform
____ Damage
Location
Bracket
SIN
Dimension of the
defect (Maximum length &
Maximum depth
of the
HPT Case SN:
location ALF
width) defect
Please inspect the HPT aft flange case for
3 8 O'clock 62104
fretting and include the results in the
table, with minimum accuracy of 3
decimals for inches and 2 for millimeters.
Remove outboard portion Measure maximum depth, width, and length of worn area
of cracked bracket Submit HPT case measurements with DR request
11 / CFM Proprietary Information subject to restrictions on the cover
DR issued per table
Thank you