Professional Documents
Culture Documents
Teacher:
María Concepción López Romero
4IM1 6.53
-Dávalos Reynoso Carlos
-García Castillo Diego Guadalupe
-Lozada Muñoz Elías Gael
-Pulido Dominguez Juan Fernando
WHAT WE WANT TO DO?
Through the semester, we were developing our
projects that we have been doing. So here we are
going to explain the process and why is important for
us this project.
The purpose of this project is to contribute to save our planet, setting ideas to recycle car parts and whatever we
can imagine. In this way, we can save materials avoiding this materials stay in contact with the nature, and also
doing this we can stop wasting material. As result, we will be preventing animals get hurt if they eat this pieces,
and we will be apporting for the global warming.
2
HOW WE ARE GOING TO DO THAT?
In this project we have to put our effort because
this can help the people to having lamps with a
low cost while they are saving the planet.
3
WHAT YOU NEED TO KNOW
We all know that cars are a great emitter of pollution, but their CO2
emissions are not the only problem they have.
Its parts can hardly ever be used in other cars, so they are
frequently cast in the iron industries and with that iron
other car parts, electronic boxes and other iron
presentations are manufactured. But that process also
causes a lot of pollution.
1/7/20XX 4
GLOBAL WARNING
It is not susprise that the world became
uninhabiltable if we don’t do something to help. The
wild rife have been one of the most affected things
with the extreme pollution because, although the
trees can clean the air, they cannot do something
with the garbage.
6
CARLOS’S LAMP
The project that I did, is a lamp with recycled car parts like springs that won’t
be used in the future.
7
DIEGO’S LAMP
8
ELÍAS LAMP
I get parts with gears as base, crankshaft pulley, rod with gear as resistance and use of motor synchronization gears to support
the spotlight with switch for push-button lamps and spotlight led smart bulb saving white and color.
Now we weld it to
Then we removed the base and to
the copper plastic the upper part.
covering from the That part will be
I cut the chain to cables to be able to the support to all Finally, we place
the right size with the lamp, so, it the bulb in its
join the switch and place, turn on
the grinder, also I the socket, passing needs to be heavy
and stable. and it's done. 😊
welded the chain. through the chain
(Depends on your until we reached the Also, the welding
needs) have to be well
top where the
done.
spotlight was placed. 9
FERNANDO’S LAMP
I wanted my lamp to be something different, so I tried to make a strange support, with it I loved the
result. I used some wooden, a filter, rope, some folding pieces to spread the light, and a mobile piece
for the filter by the way.
I used a bus filter cover as I used some wire and niles to And finally, the floating
a reflector so that the led make the joints after painting structure is made. It's just a
can take advantage of the all the parts. Although there are physical effect. And the lamp
color. two pieces, in the end there will is finally ready.
be only one.
10
CUNCLUSIONS
We can conclude that make lamps with recycled parts may be a
good use for them.
11
GLOSSARY
Throughout A lo largo de
Folding Plegable
Spotlight Destacar
Crankshaft Cigüeñal
Warming Calentamiento
Go bad Desintegrar (Naturalmente)
Springs Resortes
Fulfills Cumplir (Expectativas)
References:
K. Malouf-Bous Published by Oxfam GB for Oxfam International under ISBN 978-1-
78748-429-0 (2019),
Regenerative agriculture: Merging farming and natural resource conservation
profitably
PeerJ, 1–12 (2018),
Heat from underground energy London (heat fuel)
Refrig. Sci. Technol., Augus (2019), pp. 4598-4607 12
TRANK U SO
MUCH
13