Professional Documents
Culture Documents
Customer Presentation
September 2010
Contents
Flexi Multiradio
BTS
Coverage &
Capacity Environmental
improvement responsibility
ARPU
New growth
markets
Notes
How to make the most of the spectrum?
Global mobile traffic New multiradio, multiband reality
capacity
2600MHz
ExaByte/month Capacity
2.5 expansion
Handheld
2.0 data traffic
Ongoing HSPA operation in
Laptop existing bands
1.5
data traffic 1800/1900MHz
1.0 GSM LTE refarming
Voice 850/900MHz
0.5 traffic
GSM HSPA/LTE refarming
0.0
2007 2008 2009 2010 2011 2012 2013 2014 2015 700/800MHz (Digital Dividend)
Broadband coverage expansion
Source: analyst reports and internal research
coverage
Note: typical scenarios, currently 14FDD and 8TDD bands defined in 3GPP
Environmental improvement
0.4% 1.7%
Source: Nokia Siemens Networks customer satisfaction survey 2008:
912 respondents from telecom operator management
95% recyclable
System module
Zero Tower
footprint mounting
GSM/EDGE /WCDMA/
HSPA/HSPA+/ I-HSPA/ LTE BSC RNC
GSM/EDGE –
WCDMA- LTE Flexi EDGE BTS
bands
(850,900,1800,1900) GSM/WCDMA/LTE
Flexi WCDMA BTS
Flexi Multiradio BTS
WCDMA – LTE
bands WCDMA/LTE
(700, 1500, 800EU,
1.7/2.1, 2100, 2600)
LTE 2600
GSM, WCDMA, HSPA+ & LTE, within same band
WCDMA 2100 WCDMA/LTE2,1
– With SW upgrade
– Dedicated & concurrent mode
85 cm
WCDMA/LTE SM WCDMA/LTE SM
– MIMO support
• 3 sector MIMO 60+60W with 2 x RF Dedicated modes: GSM, WCDMA, LTE
Modules GSM-WCDMA, WCDMA-LTE and GSM-LTE
• 1 sector MIMO 60+60W with 1x RF concurrent mode
Module GSM-WCDMA-LTE concurrent mode
– All- purpose 19” module
• Outdoor, IP65, -35C to +55C
• For indoors and outdoors, stacked,
distributed, floor, wall, pole, mast-top, in
cabinet, hidden etc. site solutions *)Target 2011
Flexi Multiradio BTS
Outdoor Flexi Remote Radio Head (RRH) 2TX band x
2 RAT mode for RRH unit GSM and/or WCDMA and/or LTE GSM and/or WCDMA and/or LTE
(Dedicated or Concurrent mode for MCPA)
(The capacities shown here are per *BW evolution *BW evolution
MCPA or per branch. RRH has 2 MCPA -2G+1L(15MHz) -2G+1L(15MHz)
branches. So the total RRH HW capacity
is twice the MCPA Concurrent Mode as -1U+1L(15MHz) -1U+1L(15MHz)
shown here) - 4G+2x2L(15MHz) MIMO with 2 - 4G+2x2L(15MHz) MIMO with 2
MCPAs MCPAs
Dual band e.g. GSM 900MHz and Dual band e.g. WCDMA 900MHz and
1800MHz(2 2100MHz(4
1) RG30 Flexible MCPA TX Power Pooling, 2) top of RG10, 3) FRGP top of RU20, 4) top of RU20
Flexi Multiradio BTS
Concurrent mode configuration examples
1/1/1 20W and 1+1+1/40W
2/2/2 20W and 1+1+1/40W
1/1/1 40W and 1+1+1/20W
RM 1800 (FXEA) GSM 6/6/6 15W(3 and LTE
RM 900 (FXDA)
2/2/2 20W and 1+1+1/20W RM 900(FXDA) 1+1+1/60W, 20MHz
18TRX SM (ESMB) 3/3/3 10W and 1+1+1/20W MM SM (FSMx)
MM SM (FSMx)
4/4/4 10W and 1+1+1/20W
18TRX SM (ESMB)
GSM - WCDMA e.g. 900MHz (1 GSM e.g. 900MHz and LTE 1800MHz(2
RM 900 (FXDA) RM 1800 (FXEA) GSM: 6/6/6 15W(3 and 1/1/1/ 20W,
1/1/1 40W and 1+1+1/20W LTE 1+1+1/40W, 10MHz
RM 1800 (FXEA)
2/2/2 20W and 1+1+1/20W RM 900(FXDA)
GSM 6/6/6 15W(3 and 2/2/2/ 20W,
18TRX SM (ESMB) 3/3/3 10W and 1+1+1/20W MM SM (FSMx) LTE 1+1+1/20W, 10MHz
MM SM (FSMx)
4/4/4 10W and 1+1+1/20W
18TRX SM (ESMB)
GSM- WCDMA e.g. 900MHz, GSM GSM Dual band e.g. 900MHz and 1800MHz, LTE
1800MHz 6/6/6 in dedicated mode (1 e.g. 1800MHz (2
(1 top of RG10/RU20, 2) RG25/RL20, 3) RG30 Flexible MCPA TX Power Pooling
Integrated Transmission
Plug-in sub-modules for GSM/EDGE
FTLB Microwave
4xE1/T1/JT1, IMA
3xGE, TOP, Sync. Ethernet, FTFA
Dual Iub, IP Iub, ATMoEth, Integrated MWR
I-HSPA ready, 2xFlexbus,
Full readiness for LTE 16xE1 add/drop,
E1 cross-connect
between interfaces
I-HSPA
LTE
FTFB
Integrated MWR
3x Flexbus (2x powered), 2xGE,
FTIB Sync. Eth. slave & regeneration, PDH
4xE1/T1/JT1, IMA and Packet, Dual Iub & IP Iub,
3xGE, E1 cross-connect & Eth switching
TOP, Sync. Ethernet, FTJA FTIA Full readiness for LTE
Dual Iub, IP Iub, ATMoEth 4xE1 coax, IMA 4xE1/T1/JT1, IMA
Full readiness for LTE 2xFE, 1xGE 2xFE, 1xGE
LTE
LTE
Flexi Base Station enables Green
Radio
70% lower energy consumption and CO2 footprint
Power consumption of a complete GSM & Green over the entire life-cycle
WCDMA BTS site 1. Production
Low power 80% less material
consumption
enables RES 2. Transport & installation
1470W
25 l, <25 kg modules
minimize logistics related
>70% environmental impact
WCDMA
GSM 3. Operation
Multiradio
455 W 70% less energy
1470W
1500W
4. Extended operation
800 W 790 W
remote software-upgrade
instead HW-exchange
2005 2008 2010
traditional
5. End-of-operation
BTS
design Measurement conditions: 95% recyclable
WCDMA 1+1+1@20W WCDMA BTS HW with 50% load and
4+4+4GSM (2% blocking, DTX and DPC active)
Highest cost efficiency in coverage
and capacity
Flexi BTS in GSM/EDGE mode in mast-top with OSC
Flexi EDGE 222 with OSC equals ~
444 capacity and enables superior
coverage with mast top installation
-50%
Best-in-class coverage features
Industry-leading performance
No combiners with OSC
Highest BTS capacity with:
Smallest BTS for any capacity
Legacy Flexi BTS Flexi BTS + OSC
Best-in -class capacity features
BTS
OSC
Lowest cost coverage and capacity with Flexi BTS and OSC.
OSC = Orthogonal Sub-Channels
Flexi BTS in GSM/EDGE mode in
Mast top installation
Flexi BTS
Mast top fully-outdoor Housed site with aircondition
Lowest power consumption
1/1/1 with best radio performance
60 Antenna output 60
0 RF feeder loss 60
40 AC/DC conversion 53
loss
440 AC power for BTS 588
Cost efficient
About 3 times better coverage
Capacity optimized with 4.2 MHz bandwidth
NetAct supported
Terminals widely available
Field proven 4.2 MHz carrier bandwidth
Ensure GSM capacity in WCDMA Refarming
Rel. 7 Rel. 8
Centralized
operations
enable
efficient use
of resources
Fault and Service Performance Inventory and
Network trouble and SLA management configuration
Operations management management management 24/7 visibility
Centre to network