The document provides information about maintenance of a banding machine. It describes cleaning the inverter and PLC equipment which control the machine. It also outlines checking power and control cable connections, modules, and other electrical components in the panel. Field devices like motors, switches, and the encoder must also be inspected and cleaned. Maintenance includes checking equipment for loose or overheated connections, cleaning proximity sensors, and ensuring spare parts are available. The presentation aims to outline the key components and maintenance checks needed to properly service the banding machine.
The document provides information about maintenance of a banding machine. It describes cleaning the inverter and PLC equipment which control the machine. It also outlines checking power and control cable connections, modules, and other electrical components in the panel. Field devices like motors, switches, and the encoder must also be inspected and cleaned. Maintenance includes checking equipment for loose or overheated connections, cleaning proximity sensors, and ensuring spare parts are available. The presentation aims to outline the key components and maintenance checks needed to properly service the banding machine.
The document provides information about maintenance of a banding machine. It describes cleaning the inverter and PLC equipment which control the machine. It also outlines checking power and control cable connections, modules, and other electrical components in the panel. Field devices like motors, switches, and the encoder must also be inspected and cleaned. Maintenance includes checking equipment for loose or overheated connections, cleaning proximity sensors, and ensuring spare parts are available. The presentation aims to outline the key components and maintenance checks needed to properly service the banding machine.
Training on Banding Machine operation & Maintenance Presentation by Mr. Mahmuduzzaman July-2022
BSRM WAREHOUSE Description
• Banding machine are operated with Inverters.
The operation is controlled with PLC. Our banding machine here is located in the middle of the floor. Due to being in the middle ,a lot of dirt accumulates .Harmful to dust Inverter & PLC. Therefore, no dust can be allowed to accumulate inside the panel. So banding machine maintenance means Inverter & PLC equipment cleaning with others equipment checking. • All the equipment used in the banding machine is damaged very little. So if you can keep it clean like time. There is no big problem. All equipment must be checked while maintenance the panel .Power cable connection check, control cable connection check, PLC module connection check. • Shows whether any cable connection is loose /Overheated. Must be maintenance it. Power supply • Power supply: Power supply unit check. Input supply 220 V Ac output 24 V DC. • . Power supply 24 v Dc • Below are all the equipment that are installed on the panel side: Inverter, PLC (module),control transformer ,power supply ,auxiliary contractor ,Relay, Breaking resistor fuse with fuse base. Field device • Field device: Chain motor, Hydraulic pump motor, Encoder with coupling, Proximity switch, Solenoid coil, Paddle switch, operating switch board ,Emergency switch, Selector switch, Push button switch etc. Bending machine encoder • Encoder: The coupling of the encoder must be checked while checking the field device. Also encoder cable connection & encoder pulse checking. Encoder with coupling • Proximity switch: The proximity switch needs to be cleaned & the connection checked. • Solenoid coil: The connection of the solenoid coil needs to be checked. Solenoid coil • Paddle switch: The paddle switch has to be maintained & another one to be prepared so that it can be used when needed. Foot /Paddle switch • Motor: Motor terminal check, meager value check & earthing insure. • Operation Switch Board: Every switch fixing check, connection check ,spring tension check. Operator panel Cycle speed sating Tying position slot Bundle wide 500 mm,correction10mm Questions or Query if any? Thank You All