This document provides instructions for exercises using an ESP chip. The first exercise has you prepare and upload code to the ESP to connect it to the internet and verify it has a unique IP address and can be accessed via a web browser UI. The second exercise connects the ESP to an Arduino via UART and instructs moving a vehicle 5cm forward from the web browser.
This document provides instructions for exercises using an ESP chip. The first exercise has you prepare and upload code to the ESP to connect it to the internet and verify it has a unique IP address and can be accessed via a web browser UI. The second exercise connects the ESP to an Arduino via UART and instructs moving a vehicle 5cm forward from the web browser.
This document provides instructions for exercises using an ESP chip. The first exercise has you prepare and upload code to the ESP to connect it to the internet and verify it has a unique IP address and can be accessed via a web browser UI. The second exercise connects the ESP to an Arduino via UART and instructs moving a vehicle 5cm forward from the web browser.
• Prepare ESP according to lecture slides and upload necessary code to
the chip. • Verify that ESP is able to connect to internet, and has unique IP • Connect to ESP via laptop or mobile web browser and verify that you are able to access UI seen below
Tampere University of Applied Sciences /Degree Programme in ICT Engineering 1
ESP Exercise 2 • Connect ESP to Arduino via UART and move your vehicle 5cm forward from web browser
Tampere University of Applied Sciences /Degree Programme in ICT Engineering 2