Professional Documents
Culture Documents
1st February 2023 MR
1st February 2023 MR
Marking No lines are Dovetails All correct but All Lines are
Lines square, uneven going correct forgot to square and
spacing dovetails direction but mark on end dovetail going
wrong direction uneven grain right direction
spacing
Using Using Ruler to Used coping Forgot to use All tools were
Tools square lines, saw for try square used safely
diagonally cutting cutting when drawing and for the
with tenon saw straight lines straight lines correct
purpose
Sawing Left a lot of Close to the Cut Lines are
Quality waste, cut the marked line straight on all
tails like finger but passed tails with little
joints the shoulder waste left
line. behind
Tidy
Up!
KWL
K – What you KNOW
W – What you WANT to know
L – What have I LEARNED
Examples:
K – I know what direction the tails go
W – I want to know how to saw
accurately
L – I have learned to find
measurements off a working drawing
Learning Intentions
Determine Measurements
required for the project.
Demonstrate your
knowledge of marking out.
Reinforce the skill of sawing.