The engine ECM was replaced but the FLS and FTS information was not acquired from the old ECM. The document provides instructions to find the FLS and FTS settings for a Perkins C4.4 engine with serial number C4E24765 by searching the ECM replacement document in the Service Information System. The user is told to control-F search for "FTS" and "FLS" to find the number values for each setting.
The engine ECM was replaced but the FLS and FTS information was not acquired from the old ECM. The document provides instructions to find the FLS and FTS settings for a Perkins C4.4 engine with serial number C4E24765 by searching the ECM replacement document in the Service Information System. The user is told to control-F search for "FTS" and "FLS" to find the number values for each setting.
The engine ECM was replaced but the FLS and FTS information was not acquired from the old ECM. The document provides instructions to find the FLS and FTS settings for a Perkins C4.4 engine with serial number C4E24765 by searching the ECM replacement document in the Service Information System. The user is told to control-F search for "FTS" and "FLS" to find the number values for each setting.
FLS and FTS are required. But, Information was not acquired from old ECM. It was not indicated to TMI. Please let me know FLS and FTS.
Caterpillar: Confidential Yellow
• Model • D5K LGP • Serial Number • JLF00297 • Engine • C4.4 – Perkins • Serial Number • C4E24765 • C4E24765
Caterpillar: Confidential Yellow
Caterpillar: Confidential Yellow Caterpillar: Confidential Yellow Not available in PTMI
Caterpillar: Confidential Yellow
• T2863 - Performance • Not available curve • Test Spec • Not available
Where else to go for?…
Caterpillar: Confidential Yellow
1. Go to SIS 2. Go to Service Software Section 3. Click on ECM Replacement 4. Enter engine S/N and click “Search” 5. Click on the file that appears. 6. Then press the “control” and the “F” at the same time. (This will allow you to search the document.) 7. Then type “FTS” and press the “enter” key. This should take you to the FTS setting. In this section look for <ValueEnglish> the number listed next is the FTS setting. 8. Repeat this operation for the FLS setting.