This document discusses injection rates and bottomhole pressures for gas wells SBG-04 and SBG-08. For SBG-04, the injection rate was 4 MMscf/d with an initial bottomhole pressure of 2035 psi, dropping to 1800 psi before rising back to 1860 psi. For SBG-08, the injection rate was 6 MMscf/d with an initial bottomhole pressure of 2035 psi, dropping to 1900 psi. The document also mentions the maximum injection rate is 10 MMscf/d and analyzes the distribution of CO2 at the end of injection.
This document discusses injection rates and bottomhole pressures for gas wells SBG-04 and SBG-08. For SBG-04, the injection rate was 4 MMscf/d with an initial bottomhole pressure of 2035 psi, dropping to 1800 psi before rising back to 1860 psi. For SBG-08, the injection rate was 6 MMscf/d with an initial bottomhole pressure of 2035 psi, dropping to 1900 psi. The document also mentions the maximum injection rate is 10 MMscf/d and analyzes the distribution of CO2 at the end of injection.
This document discusses injection rates and bottomhole pressures for gas wells SBG-04 and SBG-08. For SBG-04, the injection rate was 4 MMscf/d with an initial bottomhole pressure of 2035 psi, dropping to 1800 psi before rising back to 1860 psi. For SBG-08, the injection rate was 6 MMscf/d with an initial bottomhole pressure of 2035 psi, dropping to 1900 psi. The document also mentions the maximum injection rate is 10 MMscf/d and analyzes the distribution of CO2 at the end of injection.
• Constraint yang digunakan adalah Gas Rate = 4 MMscf/d
dan BHP = 2035 psi • Injeksi rate = 4 MMscf/d • BHP di awal 2035 psi, kemudian turun sampai ke 1800 psi, lalu naik kembali hingga konstan di sekitar 1860 psi Inj Rate & BHP (SBG-08)
• Constraint yang digunakan adalah Gas Rate = 6 MMscf/d
dan BHP = 2035 psi • Injeksi rate = 6 MMscf/d • BHP di awal 2035 psi, kemudian turun sampai ke 1900 psi Penyebaran CO2 saat akhir injeksi