Professional Documents
Culture Documents
Pillar
X-ray tube
Rack
Collimator
FPD
Bumper
Brake switch
Movement
NO. Function
1 Touch screen
2 Emergency stop switch
3 Power Indicator
4 Ready indicator
5 Exposure indicator
6 Fault indicator
7 Sports battery indicator
8 Exposure battery indicator
9 Detector power off
10 Detector power on
11 Key switch off position
12 Key switch M position, can only move
the machine
13 Key switch R position for all operation
Movement
• Turn on the circuit breaker
• Turn the key switch to the M position
• Put both hands on the push rod in front of the machine, Pick up the push rod enabling
handle, and you can use the electric assist function of the machine normally.
Movement
This machine adopts the intelligent induction booster system, and there are
many ways of moving, as follows:
Status Operation
Apply force forward with both hands simultaneously to make right
Forward and left wheels advance fast at the same time.
Apply force backward with both hands simultaneously to make right
Backward and left wheels back away slowly at the same time.
Apply force forward with left hand and backward with right hand to
Right make the machine turn right.
Turn
Apply force backward with left hand and forward with right hand to
Left make the machine turn left.
Collimator
NO. Function
1 Cross arm rotating around stand column,
cross arm stretch unlock button
2 Ascending button
5 SID display
7 Descending button
Rotate button 2
• Part 2
Preparation
Confirm installation environment
Engineer standing in
front of the goods
Shipping Mark Protection sign
Unpacking
Remove the top cover, check again whether
there is any obvious damage inside , and also
you need to take photos(video) for storage.
Then remove the surrounding side covers
Unpacking
Clear photos(video) of All Positions of the machine need to be taken.
Top
Left side
Right side
• Connect the power cord of the beam limiter and rotate clockwise to
fix it.
Installation
• Insert the power cord into the corresponding power cord holder and
rotate clockwise to fix it.
Air Switch
Click button
New patients need to register basic
information:
• Serial number
• Name
• Age
• Gender
1.Click button
5. Adjust KV/mAs
6. Press
Select the part of the human body and click the "rebuild" button to reconstruct the image
Workstation
1. Click button
Double-click to select the image you want to add to the report in the
thumbnail on the right and the image will be automatically added to the
report ( 3 at most). Preview and print the report.
Workstation