Professional Documents
Culture Documents
90 Deg Crimping Testing Description - Klauke
90 Deg Crimping Testing Description - Klauke
Test Set-Up
Inserting Palm into Fixture Tightening the Palm Supporting Barrel by Second Plate
Holding Cable End with Jaw Overall Test Set-Up Control Panel
2
90° Angular Lug Pull Out Test as per IEC 61238-1:2003
3
Klauke Tool Crimping : Part Number : RLAN 35-10 & RLAN 95-10
Results:-
All Tested Lug Withstand & Pass Pull Out Load as Per IEC 61238-1:2003
There is no Loosening of Lug Crimping found After Test
All the results found satisfactory.
5
THANK YOU