Professional Documents
Culture Documents
c06 Proe wf2.0
c06 Proe wf2.0
Learning Objectives:
• Create Linear pattern.
• Create Rotational pattern.
• Create Reference pattern.
• Create Table-driven pattern.
• Create Fill pattern.
• Control the size of the pattern instances using
constrains in sketcher environment.
• Use the Copy option.
• Use the Move option.
• Use the Mirror Tool option.
• Create section of the model.
• Uses of Patterns
1. Patterns create multiple copies of a feature, and hence save time of creating the
features individually.
2. All the instances in a pattern, including the parent feature, act as a single feature.
Therefore, they can easily be suppressed or mirrored.
3. All the instances in a pattern are related parametrically. Hence, you can modify
the number of instances in a pattern, the spacing between the instances, and
other parameters.
4. If the dimensions of the parent feature are modified then the dimensions of the
child features are also modified.
• Drop-down list
The Drop-down list contains the various types of patterns. There are four types of
patterns that can be created in Pro/ENGINEER.
1. Dimension pattern
Hole patterned in
Hole on a surface two directions
2. Direction Patterns
3. Axis Patterns
The Axis option is used to create rotational patterns.
Parameters for the axis pattern Rotational pattern Pattern created in both circular
created using the axis and linear directions
4. Fill Patterns
Fill patterns are used to fill the sketched area by a selected feature.
5. Reference pattern
6. Table pattern
Pro/TABLE
• Options Tab
• Identical Pattern
• The Identical option is used to create an identical pattern.
• You need to select at least one incremental dimension to pattern the feature.
• Depending upon the incremental dimension selected, the resulting pattern will be
linear or rotational.
• Figure A shows a hole feature on the base feature and Figure B shows holes
patterned linearly.
• Similarly, Figure C shows a hole feature on the base feature and Figure D shows
the rotational pattern of the hole feature.
Figure B Hole
Figure A Hole on patterned on the
the base feature base feature
• Variable Pattern
• The Variable type of pattern is used when the instances vary in size.
• In this type of pattern the instances can be placed on different surfaces and
can also intersect with the edges of the placement surface.
• The feature shown in Figure A is patterned using the Variable option and
is shown in Figure B.
• General Pattern
• The most complex patterns can be created using the General pattern.
• This is used to create patterns in which the instances touch each other and
intersect with other instances or the edges of the surface.
• The hole shown in Figure A is patterned using the General option and is
shown in Figure B.
• Deleting a Pattern
• You can delete a pattern by selecting it from the Model Tree.
• Select the pattern feature from the Model Tree and right-click to invoke the
shortcut menu.
• Choose the Delete Pattern option from the shortcut menu.
Copying Features
• The Copy option facilitates the model and speeds up its
creation by copying and mirroring the selected features.
• This option reduces the time required in the model creation
and also helps in maintaining the symmetry of the model.
• When you choose the Copy option from the FEAT menu, the
COPY FEATURE submenu appears.
• The various options in this submenu are discussed next. COPY FEATURE
submenu
• New Refs
• The New Refs option is used to copy a feature by varying the
dimension values and by selecting new references.
• The references can be edges, axes, or placement planes.
• Using the GP VAR DIMS menu menu, you can select the
dimensions that are to be varied while copying a feature with new
references.
• The options in the WHICH REF menu enables us to keep the
same references or the new references. GP VAR DIMS menu
• Same Refs
• When you use the Same Refs option, you have the flexibility to
vary the dimensions of the copied features.
• You need to select the dimensions you want to vary while
copying a feature.
• The dimensional and placement references of the copied WHICH REF menu
feature are the same as for the source feature.
• Mirror
• The Mirror option is used to copy a feature by mirroring it about a specified datum
plane or a planar surface.
• When you invoke this option, you are prompted to select the features to be
mirrored.
• Once you select the features to be mirrored, you are prompted to select a plane or
create a datum about which the features will be mirrored.
• Figure A shows a rib feature that is to be mirrored and Figure B shows the model
after mirroring the rib feature.
• Select
• The Select option provides the flexibility of choosing the features to be copied.
• When you use this option, you need to select the features either from the
graphics screen or from the Model Tree.
• You can select any number of features to copy.
• All Feat
• The All Feat option is available only when you copy a feature using the Mirror or
the Move option.
• When you use this option, all the features created are copied.
• FromDifModel
• FromDifVers
You can copy features from a different version of the current model using the
FromDifVers option.
• Independent option
The Independent option specifies that the dimensions of the copied features are
independent of the dimensions of the parent feature.
• Dependent option
The Dependent option specifies that the dimensions of the copied features are
dependent on the dimensions of the parent feature.
Mirroring a Geometry
• The MirrorGeom option from the FEAT menu mirrors the whole model
about a specified datum plane and the mirrored portion is automatically
merged with the original portion.
• All the features in the mirrored model are related to the parent model.
• Figure A shows a model and a datum plane for mirroring the model.
• Figure B shows the resulting mirrored model.
Tutorial 1
In this tutorial you will create the model shown in Figure A. This figure also shows the
isometric, top, front, and right-side views of the model. (Expected time: 30 min)
c. The second feature is also an extruded feature. The sketch of the second
feature (Figure E and Figure F) will be created on the right planar surface
of the base feature and then it will be extruded to a depth of 9 (Figure G).
Figure E Sketch of the second Figure F Sketch for the second feature
feature with weak dimensions
f. Save the model and then close the window. Figure I Last feature
after mirroring
Tutorial 2
In this tutorial you will create the model shown in Figure A. The dimensions of the
model are given in the top and front views of the model shown in Figure B.
(Expected time: 45 min)
a. First examine the model (Figure A) and then determine the number of features
in it. The model is composed of ten features.
b. The base feature is an extruded feature. First the sketch of the base feature will
be created on the FRONT datum plane (Figure C) and then it will be extruded to
a depth of 60 (Figure D).
e. The fourth feature is a hole feature (Figure G) and then this hole will be
patterned. After you pattern the hole feature (Figure H), the hole and the
pattern features will be combined in a single feature.
Figure G The hole feature on the Figure H Model after patterning the
base feature hole
f. The fifth feature is a rib feature. The sketch of the rib feature will be created
on the FRONT datum plane (Figure I) and then the given thickness will be
applied to it (Figure J).
i. The eighth feature is a cut feature. The sketch for this feature (Figure N) will
be created on the bottom planar surface of the base feature and then it will be
extruded to the given distance (Figure O).
j. The ninth feature is a hole feature created on the seventh feature (Figure P).
k. The tenth feature is the copied feature of previous hole created on the seventh
feature (Figure Q).
Tutorial 3
In this tutorial you will create the model shown in Figure A. Figure B shows the top
view and front views of the model. (Expected time: 30 min)
Figure A Isometric view of the model Figure B Drawing views of the model
a. First examine the model (Figure A) and then determine the number of features
in it. The model is composed of five features.
b. The base feature is an extruded feature. First the sketch of the base feature
(Figure C) will be created on the TOP datum plane and then it will be extruded
to a depth of 32 (Figure D).
f. The fifth feature is also a hole feature and will be created on the top planar
surface of the cylindrical feature (Figure J). A rotational pattern of this hole
will be created (Figure K).
Tutorial 4
In this tutorial you will create the model shown in Figure A. Figure B shows the top
and front views of the model. (Expected time: 30 min)
Figure A Isometric view of the model Figure B Drawing views of the model
a. First examine the model (Figure A and Figure B) and then determine the
number of features in it. The model is composed of twelve features.
b. The base feature is a protrusion feature. First the sketch of the base feature
(Figure C) will be created on the TOP datum plane and then it will be extruded
to a depth of 4 (Figure D).
e. The fourth feature is a revolve cut and will be created on the plane passing
through the center of the cylindrical feature (Figure G and Figure H)
f. The fifth feature is a fin that later will be patterned. The cross-section of the
fin (Figure I) will be sketched on the plane passing through the center of the
cylindrical feature and then the sketch will be extruded on both the sides of
the plane, see Figure J. A pattern of this fin will be created by constraining
the sketch, see Figure K.
Figure K Pattern
of the fin feature
j. The ninth feature is a cut feature, see Figure P. This Figure O Model after
feature is reference patterned after creation, to create creating the cylindrical
its other instances, see Figure Q. feature
Figure Q Model
Figure P Model after after patterning
creating the cut the cut feature
k. The tenth feature is a cylindrical feature and is created on the top face of the base
feature, see Figure R. Later, this feature is reference patterned, see Figure S.
Exercise 1
Create the model shown in Figure A. The top view, front view, right-side view,
detailed, and sectioned views of the model are shown in Figure B.
(Expected time: 45 min)
Figure A Isometric view of the model Figure B Top, front, right-side, detailed,
and sectioned views of the model
Exercise 2
Create the model shown in Figure A. This figure also shows the isometric view, top
view, front view, and the right-side view of the model. (Expected time: 30 min)
Exercise 3
Create the model shown in Figure A. The top view and front view are shown in
Figure B. (Expected time: 30 min)
Exercise 4
Create the model shown in Figure A. The top and sectioned right-side views are
shown in the Figure B. (Expected time: 45 min)
Figure A Isometric view of the model Figure B Top view and the total aligned
sectioned view of the model