• Induction hardening is a non-contact process used for the surface
hardening of steel and other alloys. • The parts to be treated are placed inside a copper coil and heated above their transformation temperature by applying an alternating current to the coil. • The metal is then quenched to retain the enhanced properties of the metal alloy. • During this process, the metal core remains unaffected and its physical properties remain the same. The surface hardness, however, is significantly enhanced. • Induction hardening is similar to flame hardening in that it uses heat to increase the hardness of a material’s surface; however, instead of a flame, induction hardeners use electricity generated by an induction coil placed around the piece being hardened. This creates a magnetic field that heats the component through resistance heating without creating open flames or hot spots on its surface. • Induction hardening is a type of surface hardening in which a metal part is induction-heated and then quenched. • The quenched metal undergoes a martensitic transformation, increasing the hardness and brittleness of the part. • Induction hardening is used to selectively harden areas of a part or assembly without affecting the properties of the part as a whole. • Use induction hardened chrome bar when cylinder rods will be exposed to linear force, sliding wear or damage from impact. Inspection After Chrome Plating • Dimension, • Straightness, • Surface roughness, • Hardness, • Chemical composition, • Mechanical properties. • surface roughness of Ra 0.2μm to 0.4μm, to get the steel rods prepared for chrome plating. • Hard chrome plating creates a surface that is very hard (68-72 Rockwell C),
Oxy-Acetylene Welding and Cutting: Electric, Forge and Thermit Welding together with related methods and materials used in metal working and the oxygen process for removal of carbon