Professional Documents
Culture Documents
Convencion, Intercambio de Calor Ii
Convencion, Intercambio de Calor Ii
X rays
Ultraviolet Infrared
Gamma rays
Microwave
Thermal Radiation
Wavelength , m
• Thermal Radiation Range: 0.1 to 100 micrometers wavelength
(3x1015 to 3x1012 Hz)
• Only a portion of thermal radiation is in the visible range
Fundamentals
Planck’s Distribution: Spectral Blackbody Emissive Power
250
200
radiation is in the infrared range
and invisible to the eye (all SENA
150
products)
100
0
0 5 10 15 20 25 30 35 40
peaks in the visible light range
W a ve Le ngth (m m )
Important Notes:
• The amount of energy emitted is based on temperature (K) to the 4th power
• At higher and higher temperatures, radiation heat transfer becomes more and
more significant and can be the dominant form of heat transfer.
Fundamentals
• All real surfaces absorb and emit less heat flux than a blackbody.
E d E d
b b
E T s
4
0
0
Ts4
E d
0
b
1 Gabs
Gtrans
• For most engineering problems, surfaces are opaque ( = 0).
G d
1 0
G d
0
Important Notes:
when the surface emittance and the irradiation lie in different
wavelength ranges.
– Solar heating! Gsolar is concentrated between 0.2 and 3 microns where as
the emitted radiation range of SENA equipment is 2 ESENA 100 microns
• Qrad is the net heat transferred between the surface and the surroundings
or surface 1 to surface 2 in watts
• is the emissivity of the surface (unitless).
• is the Stefan-Boltzmann Constant = 5.67x10-8 W/m2 K4
• hrad is the radiation heat transfer coefficient and has the units (W/m 2-K).
Radiation Heat Transfer Equations
Qrad •Steady-state
•Adiabatic at the ends
•Negligible q at top and bot N N N
E in E gen - E out Est E st
Qconv
•Cu mat’l negligible temp
gradient through thickness
n 1 n 1 n 1
t
Ts=105°C=378K
N N
As T=50°C=323K E gen - E out 0
n 1 n 1
L = 20”
W = 2” I 2 R qconv1 qrad 1 qconv 2 qrad 2
t = .25”
I 2 R 2hconv As (Ts T ) 2hrad As (Ts T )
18.00 Rad,Painted E=.87
Rad,Black Matte Tin E=.53
16.00
Free Conv I 2 R 2(hconv hrad ) As (Ts T )
Heat Transfer Coefficicient (W/m2K)
4.00
hrad (Tsurf Tsurr )(Tsurf
2
Tsurr
2
)
L [1 (0.492 / Pr) 9 /16 ]8 / 27
2.00 conv
0.825 L
h
0.00
k 0.387 Ra1/ 6
2
85 95 105 115 125 150 175 200 250 300
Bus Bar Surface Tem perature (C)
Radiation Heat Transfer Current Ampacity Improvement
•Steady-state
•Adiabatic at the ends
•Negligible q at top and bot
2t (hconv hrad )T •Cu mat’l negligible temp
I W gradient through thickness
Qrad Cu @105C
Qconv
paint= 0.87
Iconv+rad-paint = 1032 A
W=2” hrad-paint= 8.55 W/m K 2
t=.25”
Cu@105C = 2.31x10-8 -m 55% increase in current capacity over tin
coating
Method of Solving A Solar Radiation Application
One surface of enclosure (G ) solar Asurf hconv Asurf T hrad Asurf T 0
Practical Radiation Considerations For Design
7. Heat Transfer & Fluid Flow Data Book I, Genium Publishing Corp.
8. Heat Transfer & Fluid Flow Data Book II, Genium Publishing Corp.
9. http://www.tak2000.com/tc/prop2.htm
10. http://www.electro-optical.com/bb_rad/emissivity/matlemisivty.htm
Questions?