IP6704A-QFXOA card can be managed in 4 ways: 1) Using a DB-9 console port VT-100 menu, 2) Telnet/SSH, 3) SNMP V1/V3, and 4) iNET network management system. The document then describes how to use each management method and configure various functions like signaling setup, status monitoring, diagnostic testing, and firmware upgrades through the card's menu system.
IP6704A-QFXOA card can be managed in 4 ways: 1) Using a DB-9 console port VT-100 menu, 2) Telnet/SSH, 3) SNMP V1/V3, and 4) iNET network management system. The document then describes how to use each management method and configure various functions like signaling setup, status monitoring, diagnostic testing, and firmware upgrades through the card's menu system.
IP6704A-QFXOA card can be managed in 4 ways: 1) Using a DB-9 console port VT-100 menu, 2) Telnet/SSH, 3) SNMP V1/V3, and 4) iNET network management system. The document then describes how to use each management method and configure various functions like signaling setup, status monitoring, diagnostic testing, and firmware upgrades through the card's menu system.
1. Use DB-9 Console port with VT-100 menu 2. Telnet / SSH 3. Snmp V1/V3 4. iNET (Loop network manage system) Console port/Telnet When we use console/Telnet/SSH login , We will see below screen We can input specific letter to setup function Snmp V1/V3 We can use MIB to manage IP6704A When we compile IP6704A MIB and create manage icon , we can see below iNET • When we create IP6704 ICON , we can see like below • Then we can use iNET to set IP6704A function QFXOA card operate When we select QFXOA card port , we will into QFXOA menu Below screen is QFXOA main menu screen QFXOA status • Press “I” enter QFXOA status screen • We can monitor QFXOA status in this screen Per-Card/Port Signaling Setup • After log on ,Press “U” enter setup Signaling Mode screen • This screen can setup Signaling Mode to Per-Card or Per-Port Per-Card for System Setup When QFXOA select Per-Card mode Press “S” enter below screen We can setup Gain value and signaling in this screen It mean four fxo port use same signaling value Per-Port for System Setup • When QFXOA select Per-port mode • Press “S” enter below screen • We can select System to setup Gain value or select Signaling to setup per port signaling Per-Port for System Setup • After log on ,Press “S=>system” enter below screen • We can setup Gain value in this screen Per-Port for System Setup • After log on ,Press “S=>Signaling” enter below screen • In this screen we can set signaling Per port • Below screen is a example to set port 1 signaling Diagnostic • After log on ,Press “T=>A” enter Diagnostic Test screen • We can do some diagnostic test in this screen QFXOA Upgrade Firmware • Press “W” enter b Upgrade Firmware screen • We can use this function to upgrade Firmware and FPGA Upgrade Firmware • Press “W=>A” enter Upgrade Firmware screen • We can use this function to upgrade Firmware QFXOA Upgrade Firmware • Press “W=>B” enter Upgrade Firmware screen • We can use this function to upgrade FPGA Q&A