Professional Documents
Culture Documents
Aminur Haque 阿米奴 training 05.11.2022-10.11.2022
Aminur Haque 阿米奴 training 05.11.2022-10.11.2022
学习成型 (05.11.2022-10.11.2022)
Name: MD AMINUR HAQUE
Department: Lasting
ID: 2208005
Content
Stella BD
01 Counter molding
PAGE…………………………………………………………….... 4-5
02 Side Lasting
PAGE…………………………………………………………….... 6-8
Counter Molding
1st 3rd
We take the shoe upper from the line. And check the molding machine at the same time to give
whether its okay or not then we move take the pressure on the counter of the upper. Heat mold
upper to the heat mold. helps the upper to be softer and it gets easier for
giving the upper our desired shape..
Next we put the upper on the heating mold. We It takes at least 20 seconds for the upper to be
2nd 4th
have to make sure upper is setup perfectly on soft properly. But if sometimes we face any kind
the heat mold. After placing upper on the heating of problem while doing this process we can
mold we press the paddle to lock the upper with press that red button to abort the process.
the mold.
Counter Molding
After the we are done with the heating process The counter is getting the shape of the mold.
1st 3rd
we move do the cold mold to give the upper final And giving this cold press helps the upper to
shape. So we follow the mark on the mold and hold on to the shape.
also the laser mark to know the exact
measurement of the counter molding. Then we
press the cold mold paddle to lock the upper.
After locking the upper we press two buttons at It takes around 15 seconds for cold mold. Once
2nd 4th
the same time to start the cold molding. after its done it will like this. After this process the
pressing the start button the machine puts the upper is ready for the toe molding.
pressure on the upper counter
Side Lasting
Pin charge is used to pull the
sides of the upper and hit the
Side lasting is one of the most important stable pipes with the insole.
process on lasting. If the side lasting is
not done properly the shoe’s shape can
be ruined. While doing the side lasting
we have to use two tools. One is Pin
Charge and the one is Side lasting Stand
1st 3rd
follow while doing the side lasting. Following the I was doing the side lasting and was following
standard helps us to avoid mistakes while doing the standard.
this process.
Before doing the side lasting the shoe upper After finishing the side lasting the shoe will look
2nd 4th
looks like this. After doing the toe lasting and like this.
latex application on the shoe insole we start for
the side lasting process.
Sandal Side Lasting
1st 3rd
check the upper whether the glue is rubbed on After finishing the side lasting of the sandal it
place. And following the sandal climbing map would look something like this. All the sandal
the vamp line is matched with the insole. So climbing map are matched with the insole.
following that we need to attach the upper with
the insole.
I was doing the sandal side lasting following the Next we need to insert the last inside the upper.
2nd 4th
standard. To keep its shape.
谢谢