You are on page 1of 2

TECHNICAL DATA

ConTile B ond
High Performance Cementitious
Polymer Modified Tile Bond TECHNICAL DATA:
Appearance Grey Powder
DESCRIPTION Packaging 20 Kgs.
C o n T i l e B o n d is a single component, high Density 1.75 Kg./- Liter
performance grey colored, pre-packed Tile Bond
mortar combining cement with selected grades Store Conditions Store in cool & dry place
of sand and several admixtures. It’s ready to use Mixing Water 5-6 Liters/- 20 Kgs. Bag
and only requires addition of water. Water absorption 1-2 %
Pot Life 2-3 Hours at 300 C
USES Adjustment Time 5-7 Hours
C o n T i l e B o n d is used for fixing all types of Thickness of 3-6 mm (depending on
ceramics, porcelains, marbles, granites and application tile-thickness)
decorative claddings on interior/exterior walls
and floors, as well as swimming pool tiling Coverage 45-50
Sft. @ 3
applications. It provides strong adhesion to mm
cement/sand screeds, to in-situ/pre-cast and thickness
aerated concrete, and brickwork.
Foot Traffic 24 Hours
ADVANTAGES Application
Temperature +5 to +400 C
 Ready to use, only mixing of water
required. Resistance to Alkalis Excellent
 Suitable for indoor and tile on tile Resistance to Solvents Excellent
applications. Temperature
 Good workability, therefore easy to Resistance From -250 to +900
STANDARDS COMPLIANCE
apply.
C o n T i l e B o n d meets the requirements of IS
 Excellent bond
15477:2004 Type I “Specifications for adhesives
 Low shrinkage
for use with ceramic tiles and mosaics.”
 Excellent tensile
strengths

APPLICATIONS:
Good Pot life
Surface Preparations:
 Needs no curing
The surface to be tiled should be clean and
 Safe & easy to use
sound. Old surfaces should be free of dust,
 Sufficiently flexible to
grease, dirt, loose plaster, laitance, curing
accommodate physical and thermal
compound, paint etc.
movements.
 Soaking of tiles not required
Mixing & Placing:
 Resistant to frost and permanent water Mix 20 Kg. bag in approximately 5-6 liters of
immersion. fresh clean water. At site addition of water shall
 Suitable for swimming pools and cold be adjusted to attain desired consistency.
storage rooms.
TECHNICAL DATA

Mix with electric fitted trowel or hand unit until TECHNICAL SERVICES:
a lump free homogeneous paste is obtained. A trained RADIANT representative is available to
Always mix the required quantity, which can be assist in the preparation of specifications, and
consumed within the prescribed pot life. the resolution of concrete problems in the field.

Spread the mixed adhesive to a thickness of 3-6


mm and comb with a notch trowel. Strictly apply Important Note:
the adhesive paste which can be tiled within 15- RADIANT Construction Technologies
20 minutes. Keep joints between two tiles using manufactures wide range of
spacers. Allow tiling to set for 24 hours and start construction chemicals, including
filling joints next day with RADIANT ConTile admixtures, concrete repairing
Grout. After grouting clean and polish tiles with mortars, curing
a damp sponge or cloth. adhesives, concrete compounds,
coatings, waterproof
LIMITATIONS: grouts & Tile Bond. protection
coatings,
For vertical application, it is necessary to
Separate Technical Data Sheets
conduct application test for fixing of ceramic
are available for these
which size larger than 20 x 20 cm or on
products.
application of certain type of ceramic.
Not recommended for tiling of facades and
power floated surfaces.
If any doubt arises concerning temperature or
substrate conditions, consult RADIANT technical
team

PACKAGING:
C o n T i l e B o n d is available in 20 Kgs. bag

HANDLING & STORAGE:


C o n T i l e B o n d has a shelf life of 12 months
if kept in a dry cool place in the original packing.

HEALTH & SAFETY PRECAUTIONS:


Where temperatures is less than 50 C or greater
than 400 C are encountered, contact our
Technical Staff. C o n T i l e B o n d , is of low
hazard. Protective gloves, goggles and clothing
should be worn. Any contact with eyes or skin
should be washed off with soap and clean water.
Where this occurs, seek medical advice before
continuing use.

You might also like